Review pinmux macro definition to a more portable format,
in preparation for new remap information encoding on stm32f1 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Failed to flash blinky example to stock nucleo_wl55jc due to default
application entering low power mode using WFI. To connect to a sleeping
stm32wl55 a system reset is required.
Signed-off-by: Jelle De Vleeschouwer <jelledevleeschouwer@gmail.com>
`net_eth_vlan_enable()` allowed to use illegal vlan tag values, fix this
by disallowing any tag value higher or equal to 0xfff (which is a limit
for the tag and a reserved value).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A lock was added to manage situation where the API poll_out and irq API
are used in same time.
Signed-off-by: Julien D'ascenzio <julien.dascenzio@paratronic.fr>
This action replaces current buildkite workflow and uses github actions
to build and run tests in the zephyr tree using twister. The main
differences to current builtkite workflow:
- the action handles all 3 events: pull requests, push and schedule
- the action determines size of matrix (number of build hosts) based on
the change with a minimum of 1 builder. If more tests are built/run
due to changes to boards or tests/samples, the matrix size is
increased. This will avoid timeouts when running over capacity due to
board/test changes.
- We use ccache and store cache files on amazon S3 for more flexibility
- Results are collected per build host and merged in the final step and
failures are posted into github action check runs.
- It runs on more powerful instances that can handle more load.
Currently we have 10 build hosts per run (that can increase depending
on number of tests run) and can deliver results within 1 hour.
- the action can deal with non code changes and will not allocate more
than required to deal with changes to documentation and other files
that do not require running twister
The goal long-term is better integrate this workflow with other actions
and not run unncessarily if other workflows have failed, for example, if
commit message is bogus, we should stop at that check, to avoid wasting
resources given that the commit message will have to be fixed anyways
which would later trigger another run on the same code.
Currently there is 1 open issue with this action related to a github
workflow bug where the final results are not posted to the same workflow
and might appear under other workflows. Github is working on this bug.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not load empty files through the ELF parser and raise exception when
magic number of ELF is not matched.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds an API to query and visit supported devices. Follows the example
set by the required devices API.
Implements #37793.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add supported device information to the device `handles` array. This
enables API's to iterate over supported devices for power management
purposes.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix ISO Broadcast only supported related conditional compile
so that data path setup does not return command disallowed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix PTC iteration value calculation for pre-transmission
subevents to consider multiple BIS events in the BIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use memcpy to access the reference to AD data passed in the
list of length encoded parameters used to construct the
Common Extended Payload Format in AUX_SYNC_IND PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to send ISO Sync payload number and
timestamp from LLL to HCI/ISOAL layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the iso_interval field from ULL to LLL context to
facilitate calculation of timestamp when there is PTO in
the BIG events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing initialization of ISO sync control procedure
variables.
Without this initialization, after synchronization the sync
is lost.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO Sync implementation to use the CRC ok status of
anchor point PDU, and not the last PDU receive, when
generating the event done message.
Without this fix, ISO sync is lost if there is continous
CRC error in the last PDU before the event is done.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds preprocessor ifdefs to reconfigure() in L2CAP tester application
depending on the KConfig option CONFIG_BT_L2CAP_ECRED
Fixes issue #40456
Signed-off-by: Johan Lundin <johan.lundin@nordicsemi.no>
Per prf spec 7.2.2.2.1, "A node that does not support
the Proxy feature or has the Proxy feature disabled
shall not advertise with Network ID".
The PR aligns implementation with the specification.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
Introduce a new RPMsg with static VRINGs backend. This new backend makes
easy to generate and use IPC instances backed by OpenAMP using the DT.
Each instance is defined in the DT as (for example):
ipc: ipc {
compatible = "zephyr,ipc-openamp-static-vrings";
shm = <&sram_ipc0>;
mboxes = <&mbox 0>, <&mbox 1>;
mbox-names = "tx", "rx";
role = "primary";
status = "okay";
};
It is then possible to register an send data through endpoints using the
IPC service APIs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Extend the RPMsg structs to accommodate for the introduction of new
backends and contextually fix the ipc_rpmsg_static_vrings_mi backend
(the only user).
Rework also some comments and ipc_service glue code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
As know, an instance is the representation of a physical communication
channel between two domains / CPUs.
This communication channel must be usually known and initialized (that
is "opened") by both parties in the communication before a proper
communication can be instaurated using endpoints.
Depending on the backend and on the library / protocol used by the
backend, this "opening" can go through some handshaking or
synchronization procedure run by the parties that sometimes can be
blocking or time-consuming.
For example in the simplest case of a backend using OpenAMP, the remote
side of the communication is waiting for the local part to be up and
running by loop-waiting on some flag set in the shared memory by the
local party.
This is a blocking process so a particular attention must be paid to
where this is going to be placed in the backend code.
Currently it is only possible to have this synchronization procedure in
two points: (1) the init function of the instance, (2) during
ipc_service_register_endpoint().
It should be highly discouraged to put any blocking routine in the init
code, so (1) must be excluded. It is also frowned upon using the
endpoint registration function (2) because the synchronization is
something concerning the instance, not the single endpoints.
This patch is adding a new optional ipc_service_open_instance() function
that can be used to host the handshaking or synchronization code between
the two parties of the instance.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Program flow will behave incorrectly (memory and instruction fetches
return invalid data) if Flexspi is accessed by the Flexspi driver while
being used as XIP memory by the Cortex M7.
Set logging to disabled by when XIP mode is used in the memc and
flexspi drivers, and warn the user if they attempt to enable it.
Fixes#40133
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
* With existence of Adafruit Qt Py boards, and upcoming wireless
Xiao from Seeeduino, define nexus node and peripheral node
labels for use with shields that accept any Xiao format board.
* Adds `&xiao_d`, `&xiao_spi`, `&xiao_i2c` and `&xiao_serial` generic
node labels.
* Add new 'seeed-xioa-header.yaml` to document new nexus node.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
