Device initialization may require use of generic services such as
starting up power rails, some of which may be controlled by GPIOs on
an external controller that can't be used until full kernel services
are available. Generic services can check k_is_in_isr() and mediate
their behavior that way, but currently have no way to determine that
the kernel is not available.
Provide a function that indicates whether initialization is still in
pre-kernel stages where no kernel services are available.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
commit 42d330406e introduced the FastPeriodDivisor value to
to the model publication struct. Based on the way it was grouped it
seems the intention was to fit it within the same octet as other bit
fields, but it actually makes the octet overflow by one bit. This ends
up creating another u8_t variable which in turn adds 24 bits of
padding after it.
To keep the size of the struct as compact as possible, group the flag
together with the key index, since that only requires 12 bits. Some
care is needed here, since the mesh stack does have special internal
key index values that require more than 12 bits such as
BT_MESH_KEY_UNUSED and BT_MESH_KEY_DEV. In this case restricting
ourselves to 12 bits is fine since the value in the model publication
struct follows 1:1 the value received in the Config Model Publication
Set message, and there the parameter is defined to be exactly 12 bits.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add utility to extract the flags Packet Boundary and Broadcast to the
hci.h together with the rest of the ACL data header definitions.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds net_bug_simple_init_with_data which can be used to initialize
a net_buf_simple pointer with an external data pointer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The GIC-400 driver currently only supports SPIs because the (32) offset
for the INTIDs is hard-coded in the driver. At the driver level there is
no really difference between PPIs and SPIs so we can easily extend the
driver to support PPIs as well.
This is useful if we want to add support for the ARM Generic Timers that
use INTIDs in the PPI range.
SPI interrupts are in the range [0-987]. PPI interrupts are in the range
[0-15].
This commit adds interrupt 'type' cell to the GIC device tree binding
and changes the 'irq' cell to use interrupt type-specific index, rather
than a linear IRQ number.
The 'type'+'irq (index)' combo is automatically fixed up into a linear
IRQ number by the scripts/dts/gen_defines.py script.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
We now use EDTS and gen_defines.py to generate DTS defines. We
deprecated the old script and defines several releases ago, so lets now
remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add build time check that guarantees that iface_api struct is the
first entry inside L2 driver data. This makes sure we do not miss
a case when the ordering of the fields in the struct is changed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Document this behavior. This partially addresses #20708, but we'll
have to deal with driver bugs case by case now that the desired
behavior is clear.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit renames two defines:
CS_INTERFACE -> USB_CS_INTERFACE_DESC
CS_ENDPOINT -> USB_CS_ENDPOINT_DESC
in order to match current naming convention when it comes
to descriptors fields.
All relevant files are updated to match renamed macros.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Some of defines are present in several header files.
Those defines are the same with value but with different naming.
Common defines are brought to usb_common.h
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Expose the bt_uuid_to_str function as an API to the application.
This aligns this function with the bt_addr_to_str function call. This
allows the application to use this function without having to enable
the BT_DEBUG option.
Move the in-place bt_uuid_str to internal logging, this is mainly done
due to the limitation in the log_strdup that shouldn't be exposed to the
application.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
gen_syscall_header.py is not longer necessary, it was just creating a
file including syscall.h. This header is now included directly by
gen_syscalls.py.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When set, the BT_GATT_SUBSCRIBE_FLAG_NO_RESUB flag indicates that the
subscription should not be renewed when reconnecting with the server.
This is useful if the application layer knows that the GATT server
persists subscription information.
Signed-off-by: François Delawarde <fnde@oticon.com>
Fills in all missing API documentation for the public Bluetooth Mesh
API, and unifies the formatting of all entries.
Some defines and enum values have been left without documentation in
cases where the meaning is self explanatory, and documentation wouldn't
add any value. Structure members that are just internal parameters are
left without documentation, as this also hides them from the generated
documentation output.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix misspellings in docs (and Kconfig and headers processed into docs)
missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Commit 571741a0c5 introduced a block to determine __BYTE_ORDER__
within toolchain/gcc.h. However, toolchain/xcc.h defined
__BYTE_ORDER__ there but the early inclusion of gcc.h causes
errors since __BYTE_ORDER__ cannot be determined within gcc.h.
So wrap around the gcc.h include with a fake __BYTE_ORDER__ to
bypass the check in gcc.h.
Also set the __BYTE_ORDER__ to the correct __ORDER_*_ENDIAN__
macro.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both k_thread_stack_t and (*k_thread_entry_t) are defined in
include/kernel.h and include/sys/arch_interface.h. The latter is
indirectly included by kernel.h which causes issues with some
toolchains. So remove the definitions in kernel.h.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It is possible that the network interface is not set when we
check the interface in net_pkt.c:pkt_buffer_length(). For example
in icmpv6 unit test the interface is left as NULL as the test does
not care about what network interface is used. For real hw like
mimxrt1050_evk, which supports Ethernet, we need to add additional
checks for the interface being non-null.
Fixes#20088
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This define has no more internal users and has no particular use
because of the system-wide user data size that gets set through
Kconfig. Therefore, deprecate it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds a deeper hierarchy to the Bluetooth Mesh documentation by moving
the modules in separate pages with a brief description of the concepts
in each module.
Adds the full list of specification defined Health model faults.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Now that the TX path and TX context (bt_conn_tx) has been redesigned
to free the contexts always in the system workqueue, it means the
system workqueue is the only context where their allocation may also
fail. This is particularly problematic with us having all L2CAP
channels (fixed & CoC alike) deferred to the system workqueue. It is
especially bad for fixed channels where being able to send responses
for SM, L2CAP signaling and ATT is critical to avoid timeouts for the
connection.
This patch moves the processing of all fixed L2CAP channels back to
the RX thread, thereby making it possible (and safe) to block while
waiting for a TX context to become available.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When suspending a thread, cancel any pending timeouts which might wake
it up unexpectedly. Also, make suspending the current thread
(specifically) a schedule point, as callers are clearly going to
expect that to be synchronous.
Also fix a documentation weirdness. The phrasing in the earlier docs
for k_thread_suspend() was confusing: it could be interpreted as
either document the current (essentially buggy) behavior that threads
will "wake up" due to preexisting timeouts, OR to mean that thread
timeouts will continue to be tracked so that resuming a thread that
was sleeping will continue to sleep until the timeout (something that
has never been implemented: k_sleep() is implemented on top of
suspend). Rewrite to document what we actually implement.
Fixes#20033
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
API comment for k_sem_take included an obsolete note about
porting from the legacy nanokernel interface.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
doxygen does not support ordered (numbered) lists using reST syntax
``1)`` or ``a)`` unless the doxygen comments are bounded by ``@rst`` and
``@endrst`` markers. The "doxygen" way to do ordered lists is to use
``-#``. This PR cleans this up for our API documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
eSPI is an aggregator device which is used by other blocks
to communicate with the master. This new APIs allows LPC
peripherals to communicate with eSPI master.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
According to API documentation, the bcdDevice field of the USB
descriptor is supposed to represents the Zephyr kernel major
and minor versions as a binary coded decimal value. However,
when using zephyr 2.0, bcdDevice is shown as 0.00 instead of 2.00.
This is due to a typo in the implementation of the BCD macro in
usb_commond.h. This commit fixes the macro.
Signed-off-by: Arnaud Taffanel <arnaud@bitcraze.io>
The HCI transport implemented by an application using the HCI raw
interface may have its own buffer headroom requirements. Currently the
available headroom gets completely determined by the selected HCI
driver. E.g. most of the time this is the native controller driver
which doesn't reserve any headroom at all.
To cover for the needs of HCI raw users, add a new Kconfig variable
for the apps to set to whatever they need. Correspondingly, use the
maximum of the HCI driver and HCI raw headroom requirements for the
buffer pool definitions and the headroom initializations.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Clarified that clock_control_off and clock_control_async_on can be
called from any context since they are non-blocking.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Description of clock_control_async_on contained information about
delayed start which is not supported by this function call.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
We should be adding a compiler barrier for IP register
when we are doing syscall generation on Cortex-M
architecture. The syscall generation itself only
does an SVC trigger; the execution returns to thread
mode and ARM does not guarantee that IP register is
preserved, when we finally get back to the point where
the syscall was invoked. This may be a problem, when
the compiler inlines the arch_syscall_invoke function,
so the IP register may be in use.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the following warning from gcc-9.2:
arm/syscall.h:52:2: error: listing the stack pointer register 'sp'
in a clobber list is deprecated [-Werror=deprecated]
52 | __asm__ volatile("svc %[svid]\n"
| ^~~~~~~
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When a MetaIRQ preempts a cooperative thread, that thread would be
added back to the generic run queue. When the MetaIRQ is done, the
highest priority thread will be selected to run, which may obviously
be a cooperative thread of a higher priority than the one that was
preempted.
But that's wrong, because the original thread was promised that it
would NOT be preempted until it reached a scheduling point on its own
(that's the whole point of a cooperative thread, of course).
We need to track the thread that got preempted (one per CPU) and
return to it instead of whatever else the scheduler might have found.
Fixes#20255
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add documentation for the possible HCI errors codes received for a
connected callback. The HCI error code received when the initiator is
canceled through the HCI create conn cancel operation is non-intuitive.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a flag for identifing whether this object is on the trace
list. Ensure that link any object to the trace list only one time.
It will avoid the issue about lost object caused by adding a
object to trace list twice.
Fixes#19537
Signed-off-by: Shih-Wei Teng <swteng@andestech.com>
By adding new SoC to Zephyr drivers has to be updated.
Commit affects:
- USB driver
- support for nRF52833 added.
- support for USB_DEVICE_REMOTE_WAKEUP in hid-mouse added.
- SPI
- IEEE 802.15.4
- CLOCK CONTROL
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Use assembly for _xt_set_intset() and _xt_set_intclear() instead of
calling into the Xtensa HAL, allowing these to be inlined.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit removes duplicate 'irq_offload_routine_t' typedef
declaration in sys/arch_interface.h.
This typedef is provided by irq_offload.h and, since this header file
is included at the top of sys/arch_interface.h, it is guaranteed to be
defined for arch_irq_offload definition.
While this does not cause a compilation error when compiling with GCC
4.6 and above, GCC 4.5 and below strictly enforce the C99 standard and
do not allow redeclaration of the same typedef in the same scope.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
