Create Kconfig configuration for nrfx_clock driver and use that to export
configuration to nrfx via nrfx_kconfig. So far nrfx_kconfig was using
Kconfig flags from clock_control which created a fixed connection between
nrfx_clock and clock_control and nrfx_clock could not be used without
clock_control in Zephyr.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
It is defined as spis120 rather than spi120,
because spi120 is already used for SPIM120 hardware instance,
but their base address is different.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
As of today, nrfx components are selectable depending if devicetree has
a certain compatible or not, and in case of IP that can operate in
multiple modes, nodelabel+compatible. An example of the later is:
```
config NRFX_SPI0
bool "SPI0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPI))
select NRFX_SPI
config NRFX_SPIM0
bool "SPIM0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPIM))
select NRFX_SPIM
config NRFX_SPIS0
bool "SPIS0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPIS))
select NRFX_SPIS
```
These symbols are later selected by e.g. SPI driver if `spi0` node is
enabled. While this works in the Zephyr context, it can be a problem in
applications using nrfx directly in the application layer, unless they
tweak devicetree. For example, if devicetree `spi0` node defaults to
`compatible = "nordic,nrf-spim"`, NRFX_SPI0 or NRFX_SPIS0 won't be
selectable, but an application using nrfx directly doesn't really care
about what is defined in devicetree as it is effectively bypassing it.
It just wants to select e.g. `CONFIG_NRFX_SPI0=y` and forget about the
rest.
This patch fixes this problem by just checking for the existence of
certain nodelabels.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for the new nrf hal CRACEN CTR DRBG driver including a new
kconfig option to enable it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
There is no reason to duplicate `nrfx_config_*.h` files.
Use configuration files from `hal_nordic/nrfx/templates`.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Added dppic0 node label, alongside the dppic to maintain backward
compatibility. The use of dppic0 is preferred.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The resource reservation header is now included according to a Kconfig
value. The Kconfig can be overriden out-of-tree in case a different
header is needed.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The nrfx_gppi module is an abstraction over nrfx_ppi and nrfx_dppi
drivers. It now has a Kconfig option that is separate from nrfx_dppi and
by default it enables all PPI/DPPI instances, if available.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The new nrfx_ppib driver can now be enabled, when the corrensponding
device tree node has the okay status.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The hal_nordic revision was updated to bring in NRFX v3.8.0.
Aligned the uses of single-instance API to use multi-instance instead.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
New PDM, some present on nRF54L15 FP1, instances have
been added. Modified condfiguration file for nRF5340,
which now requires PDM0 instance.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
Add new binding and a node to nrf54h20. Update Kconfig and nrfx_config
to include nrfx_tbm driver when node with that compatible is enabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Two Kconfig symbols were tied to a board-specific DT nodelabel - namely
the `NRFX_UARTE_CONFIG_RX_CACHE_ENABLED` and `UART_<n>_RX_CACHE_SIZE`
were tied to `shared_ram3x_region` - but this is not necessary.
That DT node is where the UARTE driver RX/TX cache buffers are placed
in the default nRF54H20 DK memory map, but on another board, they could
be located somewhere else.
The exact memory sub-regions used for this purpose are indicated using
the `memory-regions` property on each UARTE instance, which should be
generic enough already, so let's use that instead.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add Kconfig-to-nrfx symbol redefinitions so that TWIS instances
found on nRF54H20 and nRF54L15 devices are supported.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
DT nodes and compatible had been renamed and Kconfig option was relying
on the names that do not exists.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add Kconfig-to-nrfx symbol redefinitions so that PWM instances
found on nRF54H20 and nRF54L15 devices are supported.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Extend Kconfig definitions and nrfx_config translations so that UARTE
instances that are available in nRF54H20 can be used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Added GPIOTE0, GPIOTE1 instances for legacy devices,
GPIOTE20, GPIOTE30 for Moonlight and GPIOTE130,
GPIOTE131 instances for Haltium.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
This commit is a part of introduction of new WTD instances.
It adds new Kconfig symbols that can be used in WDT shim and
nrfx driver.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Rename local usbd copy from nrfx_usbd to nrf_usbd_common and use it in
both USB stacks. Renaming header to nrf_usbd_common.h allows breaking
changes in exposed interface. Mark all doxygen comments as internal
because local usbd copy should not be treated as public interface
because we are under refactoring process that aims to arrive at native
driver and therefore drop nrf_usbd_common in the future.
Use Zephyr constructs directly instead of nrfx glue macros.
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit introduces Kconfig symbols for enabling logging
for each nrfx drivers in Zephyr.
Example Usage:
To enable logging for the NRFX ADC driver, add the following
line to the project's configuration file (prj.conf):
CONFIG_NRFX_ADC_LOG=y
The purpose of this change is to enable selective logging
in Zephyr for specific nrfx drivers.
Signed-off-by: Natalia Pluta <natalia.pluta@nordicsemi.no>
nRF USBD ISOINCONFIG register controls USBD behavior after receiving IN
token addressed to ISO IN endpoint when the endpoint was not armed with
data. The options are:
* NoResp, in which case there is no response (i.e. bus timeout)
* ZeroData, in which case device responds with ZLP
This commit both makes the ISOINCONFIG value configurable and changes
the default from NoResp to ZeroData. For reference, DWC_otg controller
will always send ZLP in such case and does not have NoResp equivalent.
Automatically sending ZLP when ISO IN endpoint is not armed resolves
periodic audio dropouts observed on Mac OS with USB Audio headset
sample. Apple USB Audio class driver will attempt recovery (abort all
pending URBs, switch to alternate config 0, switch to active alternate
config and submit new URBs) every time it sees kIOReturnNotResponding
status code. During recovery no audio data can be transferred and
therefore there are gaps in the audio stream.
Apple USB Audio driver sees kIOReturnNotResponding when there is bus
timeout (i.e. IN token was sent to nRF when the endpoint was not armed
and NoResp option was active). Activating ZeroData option results in
perfectly fine (albeit short) packet that does not trigger interface
recovery and thus fixes the USB Audio issues on Mac OS.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Reworked QDEC SHIM to suppor multi-instance peripheral. Patch includes
Kconfig alignment for proper instance handling.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Although existing nRF SoCs have only one I2S instance, the nrfx_i2s
driver has now multi-instance API and the related nrfx configuration
symbols need to be used appropriately.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Change dependencies of the Kconfig options that enable particular nrfx
drivers so that the drivers and their instances are available when
a devicetree node with a corresponding compatible property exists,
no matter if it is enabled or not.
Change the options that enable compilation of multi-instance drivers
to be promptless helpers only (not directly configurable for users),
as they need to be enabled only together with some options that enable
particular instances of a given driver, and those options select them
as needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add device tree nodes for QDEC peripheral instances
for nRF5340 Application core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move nrfx glue code (nrfx integration files, related Kconfig entries,
and related part of CMakeLists.txt taken from the hal_nordic module)
to modules/hal_nordic/nrfx/ directory.
CMakeLists.txt located in modules/hal_nordic/ is now the main cmake
file for the hal_nordic module. It points back to cmake stuff related
to the nRF IEEE 802.15.4 driver that still remains in that module and
it adds the extracted nrfx part as a subdirectory.
Kconfig.nordic is renamed to Kconfig and moved to modules/hal_nordic/.
It sources nrfx related entries from that separate file.
Update also the manifest to point to accordingly modified hal_nordic
revision.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
