- use zephyr runner
- reduce number of builders and adapt matrix to be platform based
- check for changed files and optimize run accordingly, should reduce
build times depending on what has changed
- If no source has changed, skip twister completely.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable ISO (unicast and broadcast) for the BT shell.
This allows users to use the ISO features (if supported by
the controller) in the shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The PM documentation does not provide any details on usage of
SYS_DEVICE_DEFINE, so remove the reference.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new and more extensive guide that describes the device runtime
API. It contains a brief introduction, API design principles and goals,
some example sequence diagrams and usage guidelines.
While the API still needs important additions, such a guide will
hopefully guide developers when trying to deal with device PM in Zephyr.
Note: sequence diagrams have been created using PlantUML (2021 version).
The rendered SVG diagrams embed the original code if they have to be
edited and re-rendered.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The API is already rendered automatically by breathe, so do not manually
add definitions again.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The API is already rendered automatically by breathe, so do not
duplicate it manually.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Remove duplicated information (e.g. enum list, available in the API
docs)
- Use C domain to reference
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Include all API groups (some where missing) and move to pm folder
instead of power_management for consistency.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Splitted the PM reference document into smaller chunks (overview,
system, device and device_runtime). Moved this content to the guides
section, since the documentation intent is to provide general PM subsys
information and usage guidelines.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Glossary is a place where all terms can be defined, so move them there.
Some terms have been slightly adjusted and SOC interface remove since it
was not much relevant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update crypto modules prompt strings to follow the Kconfig guidelines.
"For a Kconfig symbol that enables a driver/subsystem FOO, consider
having just “Foo” as the prompt, instead of “Enable Foo support” or the
like."
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The ASSYMETRIC crypto module has been split in two, for sign and
encrypt. Update Kconfig entries to match.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove CRYPTO_GENERATOR_MODULE Kconfig which has been removed.
Its features are covered by TFM_CRYPTO_KEY_MODULE and
CRYPTO_KEY_DERIVATION_MODULE.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds support for reading multiple variable length characteristics.
Previously read_multiple() always set the variable flag to false.
This is used by GATT/CL/GAT/BV-03-C.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Setting variables for console is platform dependent. Having
uninterested platform mixed in is too noisy and hard to read. Follow
"Getting Started Guide" pattern to use tabs to group things.
Getting Started Guide uses "Ubuntu" to reference Linux based platform
but Application Development uses "Linux". This commit doesn't change
the choice of words and sticks to "Linux".
The order of the platfroms is, OTOH, unified to "Linux/macOS" from
"macOS/Linux".
This commit only changes formatting, no wording change.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
This commit adds required config files for Renode simulation and adds
missing QEMU_binary_suffix. It also adds flash and newlib tags to
ignore_tags, as flash chip is currently not provided by default in
Renode for FE310 and newlib does not fit into the available memory.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
New targets have been added that allow the user to choose a specific
emulator platform. Inform about this in the docs.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Currently there is no way to support running a board on multiple
emulation platforms nor to choose a desired emulation platform for the
simulation to be run on. This commit introduces a new
SUPPORTED_EMU_PLATFORMS list, which defines available emulation
platforms for a given board.
Fixes#12375.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
page_frame_dump() and z_page_frames_dump() are used for
debug print, so there is no need to cover those funcs.
__weak function is also excluded, every test overrides it.
Signed-off-by: Lixin Guo <lixinx.guo@intel.com>
These drivers are no longer enabled for every application,
even hello_world. The right SoC-specific drivers are
enabled in applications that need them.
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Always flash the merged hex file.
This fixes flashing for samples. Before "west flash" only worked for
tests.
I don't know why this was not done from the get-go.
This also fixes builds that enables CONFIG_TFM_REGRESSION_NS, which will
use the tfm_ns application file instead of the zephyr application, and
will merge tfm_ns hex into the merged hex file. Otherwise the wrong
application hex file will be flashed.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a macro to retrieve the iso data load length (the
length stored in the iso header) with a bit mask that
ensures that we only take the first 14 bits.
This is to remove any RFU bits that may have been set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There were a few cases where bt_hci_iso_data_hdr was used
instead of the proper struct bt_hci_iso_hdr.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When a frame is sent with a cleared ACK request bit, the transmit
metadata contains a NULL pointer to the ACK frame.
The pointer must not be dereferenced in such case.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Currently the IPM samples are hosted in the IPC sample location. Clean
this situation up by moving the IPM samples to a new location.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The IPC libraries will be used by several backends. Move the libraries
out in a new 'lib' directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Update TF-M documentation to match the current integrated TF-M version.
Include mention of the Platform secure partition that can be enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Switch the LED and button code to the gpio_dt_spec APIs. This also gets
rid of the code conditionals, so that the entire sample code is always
compiled.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Bump up the main stack size from 1kB to 2kB, seems like the settings
restore function right now goes above the default stack size for SPI
flash devices:
0x20000aa8 main (real size 2048): unused 864 usage 1184 / 2048 (57 %)
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Set a thread name for the tx_workq thread, so that it shows up in
"kernel stacks" when the shell or thread debugging are enabled.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The mcumgr_serial_parse_op has been called to extract marker and
check if it is valid, just for the caller mcumgr_serial_process_frag
to process the marker again.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
I'm taking over for joerchan at Nordic Semiconductor as a Zephyr
Bluetooth host collaborator.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add a code coverage collection action that triggers based on a schedule
on the main branch and posts results to
https://app.codecov.io/gh/zephyrproject-rtos/zephyr
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add implementation to check Periodic Advertiser
Synchronization to already synchronized peer and same SID.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Not handling telnet commands may lead to some unexpected behaviour, like
telnet client locking when it does not receive a response for DO TIMING
MARK command.
Therefore enable it by default in the sample to improve user exprience.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When telnet client queries about remote echo support, we reply that we
won't do it (which reduces the traffic), however the echo was not
actually disabled on the shell. In result characters were double-echoed
in the character mode (by both local echo from the client and remote
echo from the server).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case multiple commands were sent in a single packet, only the first
one was processed. Fix this by processing them in a loop.
As the subnegotiation command have variable length, and we currently
don't have any support for subnegotiation, stop processing packet when
such a command occurs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There was a problem with source address selection for ARP
retransmissions, when an ARP entry was already pending. In such case,
the `entry` value passed to `arp_prepare()` is NULL, which in result
caused the `current_ip` variable being used as the source value. The
problem with this approach is, that the `current_ip` is only set in
IPv4 autoconf, the Ethernet L2 does not set this variable. In result,
every retransmission of an ARP packet was sent with unspecified source
address, preventing the response from being handled.
Fix this by partially restoring the behaviour of the ARP source address
assignment from before IPv4 autoconf was introduced. If the ARP is sent
by the IPv4 autoconf, use the `current_ip` value provided. If entry is
not set, use the source IPv4 address set in the actual data packet.
Otherwise, search for a source address on the interface corresponding to
the `entry`.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
