Currently LLEXT has two ways to export symbols:
EXPORT_SYMBOL() to exort symbols from the main firmware to extensions
LL_EXTENSION_SYMBOL() to export symbols from extensions
but it is possible to write code, that needs to export symbols
regardless of whether it is built into the main image or an
extension. And in fact there's no real need in two distinct macros -
we can use one for both cases and recognise at build time which
direction exporting is happening. This patch extends EXPORT_SYMBOL()
to also work from extensions.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add a mode to build the driver without FW blobs, this is mainly for
twister to run and catch any build issues without depending on any FW
blobs.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The `bt_id_set_adv_own_addr` function itself tries to allocate a buffer
for the command and it failes due to lack of buffers, it returns error.
However, the `le_ext_adv_param_set` function doesn't handle the error
properly and keeps its own allocated buffer.
This commit releases the allocated buffer.
Partially fixes mesh in #77241.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add nrf5x binding header, as NRF5X_REG_MODE_DCDC is used in a macro
comparison. Missing header prevented evaluation to become true and so
enable DC/DC module.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Implemented new DIS characteristics:
- UDI for medical devices
- IEEE 11073-20601 Regulatory Certification Data List
- System ID
Also fixed buffer overflow bug when assigning too long DIS string literals
Signed-off-by: Simen Eilevstjønn <simen.eilevstjonn@laerdal.com>
Enable CYW20829_BT_FW_TX10DBM_POWER by default to get
best user experience experience out of the box.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Update CYW20829 Bluetooth LE fw for PAwR support
Commit#88d2529a3c5aee2e81947553bf6cbacb4671088c
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Problem:
on cyw208xx devices i see sometime `Timed out while synchronizing`
error in samples periodical_adv_rps/periodical_sync_rps.
log:
<err> bt_scan: Could not lookup connection handle from PAST
<err> bt_scan: Unknown handle 0x0000 for periodic advertising report
Timed out while synchronizing
...
After investigation i can confirm, the sync was created successful,
but in application (periodical_sync_rsp) terminated the sync when the
connection is not valid.
periodical_adv_rps doesn't have any mechanism to wait for sync and after
gatt write (subevent, response_slot information) it immediately
performs disconnection.
Solution:
Added sync wait delay before make disconnection, to ensure sync
is established before disconnection.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Added setup of PUBLIC ADDR
NOTE: By default, the CYW208xx controller sets some
hard-coded static address.
To avoid address duplication, let's always override
the default address by using the HCI command
BT_HCI_VND_OP_SET_LOCAL_DEV_ADDR. So
1. when cyw208xx_setup gets BT_ADDR_ANY from the host,
it will overwrite the default address, and the host
will switch to using a random address (set in the hci_init
function).
2. If user set the static address (by using bt_id_create)
before bt_enable, cyw208xx_setup will set user defined
static address.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Remove print "Failed to receive response...", if receive
BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_RX_FAILED.
Problem: with cyw920829m2evk_02 device periodic_adv_rsp returns
multiple messages “Failed to receive response….” in the terminal
log.
This happens because controller generates
HCI LE Periodic Advertising Response Report event for each
RspSlot. Because no RSP_DATA is observed in the OTA, which
is no scan device to transmit RSP_DATA, no RSP_DATA can be
received. Therefore, Data Status is 0xFF in all of these events,
which finally cause the messages “Failed to receive response….”
Data_Status = 0xFF is expected because nothing is received
for that Rsp Slot.
Per spec, it’s not mandatory to generate these events,
So another vendors (e.g. Nordic) might skip the HCI event
generation if Data_Status = 0xFF.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Select PAwR if enabled following features:
- BT_PER_ADV_RSP
- BT_PER_ADV_SYNC_RSP
Remove dependency BT_AIROC_CUSTOM for AIROC_CUSTOM_FIRMWARE_HCD_BLOB
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
The 'soft-off' state must be used when explicitly request by calling
`pm_state_force`. Set this state as disabled in dts ensures that the
pm policy manager will not use this state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Stores a magic value togetter with the counter value, and resets the
counter in case that magic does not match.
A small magic value is not ideal, but should be good enough for the
sample and avoids pulling in a additional dependency e.g. on crc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit moves the backup sram definition to the
series base dtsi file, the size is overwritten for socs
which have a bigger bkpsram.
The backup SRAM is available on all stm32h5 mcus.
stm32h503/523/533 have 2k
stm32h562/563/573 have 4k
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Also fixed a couple invalid or missing table of contents to have
proper document hierarchy.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
On stm32h735g_disco, `arduino_gpio` is declared while the connector is not
actually described.
On stm32h750b_dk, connector description was simply not included.
All these are blocking tests trying to make profit of arduino gpio
connectors.
Fix these.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rename `BT_CONN_AUTO_FEATURE_EXCH` to `BT_CONN_LE_FEATURES_EXCHANGED`,
and add some comments for readability.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
When using the it8xxx2bx chip, because the SRAM size is 60k and
not a power of 2, using (CONFIG_SRAM_SIZE - 1) results in an
incorrect value for the h2ram base address mask.
Therefore, the mask is declared as GEMASK(19, 0) here.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
DMA_INTEL_ADSP_HDA_TIMING_L1_EXIT should be set by default
for all Intel ACE platforms
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Tmr and dtmr drivers were missing a flag which tells the
counter_is_conting_up function that the counter is counting up. So I've
added the flag
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
If CONFIG_LOG_BACKEND_SHOW_COLOR is disabled, error and warning
lines are still being outputted with color, which is contrary to
what the Kconfig says. So change the color settings for error
and warning lines to no color if this Kconfig is disabled.
The log_output test is also amended to account for this.
Though the test is not skipped as no color is still some colors
(... well... maybe).
Fixes#77150
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Update the wrong value of xtal frequency on EK-RA6M1
- Update documentation of EK-RA6M2 regarding to clock description
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
The samples had a _iso suffix, but the other ISO samples
prefix iso_.
Renames the central and peripheral sample so that they
prefix iso_ rather than suffix _iso.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Due to it is a normal firmware downloading sequence,
it should be a debug log instead of error log.
Change LOG_ERR to LOG_DBG for this case.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The way ESP32 XIP works (with MMU and cache) does no fit the way Zephyr XIP
is implemented, causing issues related to included Zephyr linker files.
Flash code still resides in flash for execution, but MMU/Cache handles it
in such way that XIP might not (or should not) be used with current Zephyr
approach. To address this problem, XIP configuration option is being
removed from Espressif targets.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Several BSIM tests did not enable -RealEncryption=1.
Since everything in LE Audio effectively requires encryption,
we should enable it, as we have seen a few tests passing before
that shouldn't, because they didn't set -RealEncryption=1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With commit ad242b9, the buffer size was made configurable. Hence, the
corresponding definition CONFIG_SAMPLE_BUFFER_SIZE has to be used when
filling and displaying the buffer.
Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
Enable central HR peripheral HR samples for nrf54l15bsim.
RealEncryption is BabbleSIM is not enabled as nRF54L port
in Zephyr Controller is not yet supported and the test is
also not using security (SMP pairing).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
