Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the documentation for the Renesas H3ULCB board.
It document features that have been merged
during v2.7 windows and before.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
On some STM32 boards, for unclear reason,
RTT feature is working with realtime update only when
* one of the DMA is clocked
and sometimes also
* one of the DBGMCU bit STOP/STANDBY/SLEEP is set
Fixes#34324
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
It happens that CM7 wakeups CM4, before CM4 goes to sleep.
Thus when CM4 goes to sleep,
there no more wakeup from CM7. And CM4 hangs.
For a simple synchronisation implementation,
CM4 doesn't go to sleep any more,
instead it waits (active wait) for CM7 to take HSEM
(meaning that clock configuration is finished).
Fixes#38069
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
With "Incompatible (u)intptr_t type and PRIxPTR definitions",
https://github.com/zephyrproject-rtos/zephyr/issues/37718,
issue resolved the FIXME code is no longer needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
On STM32L0, there are some hardfault when DBGMCU bit Sleep, Stop
or Standby are enabled. See #37119
For unclear reason, enabling DMA clock fixes this issue.
(similarly than #38561, DMA clock comes with DBGMCU bits)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
If CYC_PER_TICK does not divide the (now - last_count) quantity exactly with integer math, the subsequent multiplication before incrementing last_count causes a drift. This commit eliminates the redundant division-followed-by-multiplication and fixes https://github.com/zephyrproject-rtos/zephyr/issues/37852
Signed-off-by: Berend Ozceri <berend@recogni.com>
This test makes use of dynamic RAM allocation done on the leftover
SRAM. Similarly to test/posix/eventfd, limit this test execution on
platforms with at least 32K of RAM available.
Fixes#38601
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
C implicit promotion rules will want to make floats into doubles very
easily. Zephyr build will generate warnings when this flag,
`-Wdouble-promotion`, is enabled with GCC
Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
In k_mem_paging_eviction_select(), the returned dirty bit value
may not be actually associated with the page selected, but
rather the last page examined. So fix this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit updates the Zephyr build system such that it does not
include the `zephyr_stdint.h`, which tries to define Zephyr's own type
system, when compiling for the native POSIX architecture.
The native POSIX architecture compiles with the host toolchain and
headers, and there can be conflicts if we arbitrarily define our own
type system (e.g. mismatch between the types and the specifiers defined
in `inttypes.h`).
Note that this is not meant to be a permanent fix; instead, it is meant
to serve as a temporary workaround until we no longer need to define
our own type system.
For more details, refer to the issue #37718.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth Host implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth shell implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To avoid hitting the following violation:
Violation to rule 5.7 (Tag name should be unique)
Replace the use of "shell" in the shell as an instance of a pointer to
const struct shell.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
controller's HCI implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix power-save-mode (PSM) operation.
When in PSM, do not bring the networking interface down
when an out-of-coverage event occurs.
When PSM goes into hibernate, this will cause an
out-of-coverage event to occur, even though the device
still has access to service.
Keeping the networking interface in the up state
allows an app to send data whenever it needs to.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Remove the HL7800 DTR device tree binding because the
DTR IO is not needed for operation of the HL7800
modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Using DTR to control sleep modes is a legacy mode
of operation. Remove control of DTR IO.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Sleep mode 0 (driven by DTR) is only recommended for use
as a legacy option.
Sleep mode 1 is recommend by Sierra Wireless.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
From 2.4 to 2.7 the net samples pair echo-server/client increase the
SRAM requirements. This adjusts example features to free necessary SRAM
to run example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The Counter resource in the IPSO Push Button object was incremented
silently by the post write handler of the State resource. This prevented
the resource from being marked as updated, effectively preventing
the engine from sending notifications to observers.
Fix this, by setting the new counter value with `lwm2m_engine_set_u64()`
instead. This will update the resource value, and trigger the engine to
send notifications if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit corrects the DMA channels for the asynchronous
UART API testing support on the SAM R21 Xplained Pro board.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
uart_sam0_dma_tx_done callback triggers when the last byte
is transferred from the tx sram buffer to the sercom DATA register.
However the byte has yet to be transmitted completely which can lead to
incorrect event handling if UART_TX_DONE is expected to signal
the end of transmission.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Fixes a compile error for the err_check function not being found if
if CONFIG_UART_INTERRUPT_DRIVEN is not enabled.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
fixes peripheral drivers such as async uart that rely on dma being
ready failing because dma is not initialized yet.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Includes support for USB, CAN, ADC, DAC, and Arduino GPIO Map.
Future could support: ETM Trace (if Zephyr supports it), QSPI, FMC, DCMI
Initially based on closest BSP for the same SoC: nucleo_f446re
Extra peripherals added based on closest BSP for nucleo-144 board:
nucleo_f429zi
Checked against nucleo-144 schematic
Documentation updated as best as I could
Arduino compatible pinmux for SPI, UART and I2C via Zio header
Tested:
USB Device mode (samples/subsys/usb/console)
Console via ST-link usart3 (samples/hello_world)
user LEDs (samples/basic/blinky)
scripts/twister --device-tests -p nucleo_f446ze
Not tested but should work: SPI, I2C, CAN, ADC, DAC
Not working yet: Quad-SPI (missing in dts/arm/st/f4/stm32f4.dtsi)
Co-authored-by: Alexandre Bourdiol
<50730894+ABOSTM@users.noreply.github.com>
Signed-off-by: Tom Owen <tom.owen@zepler.net>
This patch fixes wrong PLIC irq number of UART and SPI for SiFive
FU740 on HiFive Unmatched. Use samples/subsys/console/echo for
testing.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
On those STM32 series, setting of this feature is conditioned to
the ADC state: it is allowed to set/reset the oversampler (OVSE bit)
and set the Oversampling ratio (OVSR bits) in the ADC_CFGR2 register
only when ADC is disabled or enabled without conversion on going.
Then is the ADC re-enabled.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
On those STM32 series, setting of this feature is conditioned to
the ADC state: it is allowed to write the Data resolution (RES bits)
in the ADC_CFGR1 register only when ADC is disabled (ADEN=0).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adding test for features that are now available on h3ulcb.
We are ignoring isotp tests because of the internal loopback
implementation of the R-Car CAN controller which is sending
Rx isr before sending the Tx isr, totally confusing the Zephyr
ISOTP state machine and causing false positive.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Add an array similar to the bt_conn (ACL/L2CAP)
tx sent callback, and initialize it.
This increases the number of bt_conn_tx available
such that ISO does not take any of "L2CAP's" buffers,
but also ensures that the sent callback is called
for a broadcast iso only build.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the file variable val is not initialized,
causing the variable stack_ptr, pos, points to uninitialized data.
Initialize the variable val according to the code and commits.
Fixes#37916
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
