This change adds `k_cycle_get_64()` on platforms that
support a 64-bit cycle counter.
The interface functions `arch_k_cycle_get_64()` and
`sys_clock_cycle_get_64()` are also introduced.
Fixes#39934
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Convert the various device_get_binding() calls used to get the device
clock node to use DEVICE_DT_GET. The latter is processed at link time,
so it should be a bit more efficient.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In npcx series, we use ITIM64 as system kernel timer. Its source clock
frequency must equal to CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC. This CL
added check during initialization to prevent ambiguous condition.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
During polling ITEN bit to make sure ITIM timer is enabled, we might
have the chance that npcx_itim_evt_enable() return fake error when
timeout expired but ITEN bit is set already if CONFIG_ZERO_LATENCY_IRQS
is enabled. (Since SVCall's interrupt priority is not the highest, the
other interrupts with IRQ_ZERO_LATENCY flag could preempt CPU resource
at this moment.)
In order to prevent return fake error code, this CL adjusts the check
conditions for ITEN bit and timeout.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use timeout mechanism instead of unbounded loop during enabling ITIM32
module which source clock is LFCLK (32KHz).
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL introduces power management driver that improves the efficiency
of ec operation by adjusting the chip’s power consumption to the level
of activity required by the application in npcx series.
The following list summarizes the main properties of the various chip
power states. Please refer the power.c file for more detail.
Main power states in npcx series include:
- Active: Core, RAM and modules operate at the clocks generated by PLL.
- Idle: Enter this state when the Core executes WFI or WFE instruction.
- Sleep: clock is stopped for most of modules but PLL is enabled.
- Deep Sleep: As Sleep mode but PLL is disabled.
- Standby: All power rails are turned off besides standby and battery
power rails.
And this CL implements one power state, PM_STATE_SUSPEND_TO_IDLE, with
two sub-states for Zephyr power management system.
Sub-state 0 - "Deep Sleep" mode with “Instant” wake-up if residency
time is greater or equal to 1 ms
Sub-state 1 - "Deep Sleep" mode with "Standard" wake-up if residency
time is greater or equal to 201 ms
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL introduces a kernel device driver implemented by the internal
64/32-bit timers in Nuvoton NPCX series. Via these two kinds of timer,
the driver provides an standard "system clock driver" interface.
It includes:
- A system timer based on an ITIM64 (Internal 64-bit timer) instance,
clocked by APB2 which freq is CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC.
- Its prescaler is set to 1 and provide the kernel cycles reading
without handling overflow mechanism.
- A event timer based on an ITIM32 (Internal 32-bit timer) instance,
clocked by LCLK which frequency is 32KHz and still activated when ec
entered "idle/deep idle" power state for better power consumption.
- Its prescaler is set to 1 and provide timeout event mechansim.
- Compensate system timer which clock is gating for better power
consumption after ec left"idle/deep idle" power state.
This CL passed starve, timer_api, and timer_monotonic test suites.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
