Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
The TI SimpleLink SDK got updated to version '4.40.04.04' in 'hal_ti'.
This introduced renames of some functions in HAL and has to be reflected
in Zephyr drivers which make use of them.
This renames 'PRCMPowerDomainStatus' to 'PRCMPowerDomainsAllOn' in all
affected 'cc13xx_cc26xx' drivers.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This update brings the following changes from 'hal_ti':
b00ac9b simplelink: cc13x2_cc26x2: include flash driverlib sources
bcc5286 zephyr: kconfig for CC13x2P / CC26x2P variants
c54f72e zephyr: kconfig for CC13x2 / CC26x2 custom RF HWAttrs
b6ca1ac cc13x2_cc26x2: update to TI SimpleLink SDK 4.40.04.04
The b00ac9b ("simplelink: cc13x2_cc26x2: include flash driverlib
sources") is required by recently introduced on-chip flash driver
for CC13xx/CC26xx series.
Fixes: #47461
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
hifive_unmatched has a jedec,spi-nor flash node, however we have no
SPI driver for the controller so exclude the platform from this sample.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Use the same function at discovery complete, whether discovery failed
or succeeded.
Rename the discovery_failure() to discovery_complete(), and use that
also when discovery completes successfully.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The media control client used to subscribe to GMCS characteristics as
the characteristics were discovered, in effect queuing ATT requests.
Since then, the ATT MTU exchange has become automatic, leading to
larger ATT MTUs and more discovered characteristics per ATT response,
which again lead to the client enqueuing more subscriptions and
running out of buffers, with discovery failing as a result.
This commit moves the subscription to GMCS characteristics to a
separate sequence, so that it happens serially after discovery, rather
than in parallel with the discovery.
- Remove separate discovery parameters for the characteristics - they
are no longer needed.
- Add a subscription callback and a couple of subscription functions
The subscription for characteristics for the included OTS has not been
modified. Only two of these are subscribed to, and doing that is
currently not a problem. And I need to better understand the
interaction with OTS and how these subscriptipons are used.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Refactor subscription to get chaining into callback
Move the start of discovery of included services to a separate
function, in preparation for rewriting discovery.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
When bool is typedef'ed to for instance char the cast from 64 bits
is not so good. Now using an explicit 'cast' to true/false
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Implements PDU flow and unittest of CIS Create on Peripheral
Hooks CIS Create into the controller and fixes a few minor
things in ull to allow for running with NEW LLCP
Also handles CONFIG based comilation of CIS Create
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Hooks the CIS terminate into the controller and fixes a few minor
things in ull_conn(_iso).c
Also handles CONFIG based comilation of CIS_TERMINATE
also fixes a minor issue in helpers_pdu
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Every architecture must export the z_irq_spurious definition. Just unify
that in one single header file.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add macro Z_TEST_SKIP_IFNDEF which is used when you want to skip test
if configuration option is not enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The hwinfo shell commands was missing human readable names for
* RESET_HARDWARE
* RESET_USER
* RESET_TEMPERATURE
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
There is no reason to have this script in a different place than all the
other python scripts. Move it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
update partition alignment for iMX RT1170 and RT1160 to enable storing
MCUBoot image in boot partition.
Fixes#45486
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Aaron and Yuval have been working on the ZTest API and tests. Anas (nashif)
requested they be added as ZTest collaborators.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
It is possible to open provisioning link again after being provisioned.
Though this has no immediate consequences, the node shall not open
provisioning after being provisioned.
Reset link.cb so that any following provisioning advs are dropped.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add NPCX Power Switch Logic (PSL) DT node which controls the power rails
of SoC to get better power consumption.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL introduces how to configure PSL (Power Switch Logic) pads
properties such as input detection mode/polarity, pin-muxing and so
on via pinctrl mechanism. It includes:
1. Add two pinctrl properties and their enums for PSL input
detection configuration.
psl-in-mode:
- "level"
- "mode"
psl-in-pole:
- "low-falling"
- "high-rising"
2. Add macro functions to get PSL input detection and pin-muxing
configurations from 'pinmux', 'psl-offset' abd 'psl-polarity'
properties.
Here is an example to configure PSL_IN2 as the PSL detection input and
its mode and polarity.
/* A falling edge detection type for PSL_IN2 */
&psl_in2_gp00 {
psl-in-mode = "edge";
psl-in-pol = "low-falling";
};
A device will be introduced later which uses this pinctrl node to
configure PSL input detection settings and how to turn off VCC1 power
rail by PSL_OUT.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add an overlay for rpi_pico board to the led_pwm sample.
This board only supports fairly high pwm frequencies so
the blinking of the LED is not supported. Turning it on/off
and fading is.
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
Add bindings for pwm-leds to the rpi pico board. The default
pwm binding is connected to the onboard LED (P25).
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
This peripheral combines a hardware-based USB CDC ACM serial interface
and a JTAG interface.
It is present in the ESP32-C3.
Signed-off-by: Martin Jäger <martin@libre.solar>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
