One can not even replace sucessfully pytest basic sample `pytest-args`
with command line "--pytest-args", as all it does is to append a single
string to current list of commands, making it impossible to send several
arguments.
This patch fixes that by allowing several instances of `--pytest-args`
to compose the whole list of arguments to be passed to pytest.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
If a platform is fitlered, do not add it to keyed test map, otherwise we
will end up skipping all platforms from the same class without any
coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Useful option during development and when applying smaller change to the
code and verifying changes using tests. This works fine as long as no
dependencies or major changes are done, i.e. when editing few files and
in a subsystem. Use with caution and use on your own risk :-)
When building multiple tests, this provide significant boost, up to 300%
faster than when rebuilding everything from scratch or when re-running
cmake every single time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Measure both cmake and make/ninja build times and log them in debug mode
and additionally put the result in the json report for tracking build
times.
Cleanup what build/cmake function return and remove unused keys in the
result map.
Remove some excessive logging of launched jobs or default platforms that
gets in the way when in debug mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend Twister command line with --pytest-args. This parameter
is passed to pytest subprocess. It allows to select a specific
testcase from a test suite.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
On MacOS, ps utils raises a `NoSuchProcess` error rather than a
`ProcessLookupError` when a pid no longer exists.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Implement a workaround for Console harness to compose TestCase
identifier correctly when a Ztest suite with a single testcase
uses this harness type. Normally, a Ztest suite should use the
Ztest Twister harness.
Without this workaround each Ztest TestCase result on Console is
duplicated (and written into twister.json) with its 'identifier'
attribute set to TestSuite id only, no TestCase suffix added;
the resulting entry with the full TestCase id is also stored,
but its values are empty with defaults.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
If Console Harness 'harness_config' properties have no 'regex'
patterns or no correct 'type' set, then ConfigurationError exception
is raised, handled, and the test instance error is accounted
in the summary results.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix the Twister Console harness unordered pattern matching
to treat the ztest as failed when not all of the
expected patterns were found in the console output, but the ztest
application itself reports 'PROJECT EXECUTION SUCCESSFUL'.
Unify debug logging on pattern match for ordered and unordered patterns.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
* Replace native_posix references with native_sim
in arguments help messages
* For the seed parameter, correct platform check to accept
native_sim
* Use native_sim in twister tests
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Create copys of the common configuration values when constructing test
scenarios, to avoid mutating the common value with test specific
appends.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
when load test plan it is possible the plan is built in another os
so the case key would be
'samples/hello_world/samples.baseic.hello_world'
but the testsuite is scaned in current os may in window
and the key is like
'samples\\hello_world\\samples.baseic.hello_world'
so update the uniq path with only backslash in path
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Some platforms prefix extra logging information before the standard
[] blocks so I've added `.\*` to the regex. Also, removed the static
values so they're only referenced using 'self.' and stopped parsing
lines after the FINISHED_PATTERN is matched since some versions of
gTest also print out a test summary after and it's not useful for
the processing.
Signed-off-by: Yuval Peress <peress@google.com>
When pytest scenario fails, then 'handler.log' is printed.
Changed to print 'twister_harness.log' that is a log from
pytest execution. That file tells much more when test fails.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Apply a workaround for an issue introduced with bc8b7dd
for code coverage collection at qemu_x86 when gcov data
was broken because of optimized out memcpy() in write_u64()
static inline function, so gcovr parser fails with
"gcovr.gcov_parser.NegativeHits: Got negative hit value
in gcov line 'branch 1 taken -1'".
Add gcovr command line option to ignore such errors (since v.6.0):
"--gcov-ignore-parse-errors=negative_hits.warn_once_per_file"
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Added pytest_dut_scope keyword under harness_config section.
New keyword is used to determine the scope of dut and shell
fixtures in pytest-twister-harness plugin.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Do not break processing when incorrect coverage data are received.
Instead, report failures but still process valid data.
Include coverage processing status within twister retrun code.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
When coverage is enabled, gather console logs longer
to receive gcov data which are send after test output.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
Very verbose log message without too much context that should be a debug
message rather than a info().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
An urforseen error was introduce with #62713. When "--device-testing"
or "--filter runnable" is used in CLI, twister will skip tests which
cannot be executed (not just built) on a given platform. If a given
platform is among integration platforms it will cause an error.
However, it shouldn't be the case. Such skip is intentional and
shouldn't be an error. Fixed by assigning an existing Filter.CMD_LINE,
which is exempted from being turned to error.
fixes: #63844
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Reset TestInstance status when ProjectBuilder.run() is called
to run the test after its successful build, so the build status
will not propagate as the run status if the run fails.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix the Twister Console harness ordered 'multi_line' and 'one_line'
pattern matching to treat the ztest as failed when not all of the
expected patterns were found in the console output, but the ztest
application itself reports 'PROJECT EXECUTION SUCCESSFUL'.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
When using a quarantine file with more than 512 unique
entries, than time of matching quarantine increases
significantly. This is because regexp cache size is
512. Add precompiled regexp entries to the quarantine
as a fix.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
All handlers except QEMU were right-stripping console lines before
checking them. In certain cases where the regex is expecting the
whitespace, this could make the test fail on qemu when it is passing
on something else. Change QEMUHandler to us .rstrip instead of .strip()
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
In PR #62947 a timeout variable was replaced with a method,
but this timeout was used in another place to start
pytest subprogram. This commit provides a fix.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Test suites names are not being handled uniformly for tests not
in zephyr tree. Their names depend on -T arg used in twister's CLI.
The newly added options allow to select if twister should add paths
to suite names. This is needed if test plans are to be used for tests
outside of zephyr tree.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
"Path" is a path (relative to zephyr) to a directory with test suite's
definition. Such entry helps to locate a given test.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
In test-only mode with a hardware map, all tests with fixtures were
skipped, even when the hardware map has appropriate fixtures defined.
TestPlan.load_from_file had the check for fixtures missing, but actually
best is that the TestInstance checks the fixtures in the hardware map.
Signed-off-by: Manoel Brunnen <manoel.brunnen@ithinx.io>
Twister allows us to control maximum execution time for each test
with timeout value in test's .yaml configuration and
platform level timeout multiplier which allows us to tweak
timeout value for specific platform.
However, sometimes we want to additionally adjust tests timeouts
when running twister. This is especially useful in case of
simulation platform as simulation time may depend on the host
speed & load, we may select different (i.e. cycle accurate but
slower one) simulation method, etc...
Let's introduce global (twister-level) timeout multiplier option.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Currently, when a Robot test is run, the test case status value is
reported as `None`, which causes the XML to contain information about
the test being skipped due to misconfiguration.
This commit fixes the value reported in Twister XML test result by
assigning the test result to the `status` variable of a testcase
instance after the test has finished running.
Signed-off-by: Franciszek Pindel <fpindel@internships.antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
This is coming from devicetree and corrosponds to what we have in the
dts/bindings/vendor-prefixes.txt file.
This will allow for static filtering, especially with twister, i.e. no
need to build anything to know the vendor of a board
All of the vendor data was extracted automatically from the devicetree,
so some platforms might not have the right vendor or no vendor at all
right now, we need to fix some of the DTS information or do this
manually to get this 100% correct. But we are close.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new option --vendor which allows filtering by vendors tracked in
the board/platform yaml file. The vendor string is compatible with DTS
and is what we have in dts/bindings/vendor-prefixes.txt.
Providing multiple vendors is also supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Skips are turned to errors on integration platforms. However, if
a user (or a CI) selects toolchain other than zephyr, unexpected
errors due to skips can appear. With this commit skips due to
toolchain incompatibilities are not treated as errors.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
If coverage is provided by a different platform not in the integration
list, it should not be reported as error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove dead and erroneous (DUT is not a dict) if branch. Simply use the
self.options.platform list. Which is filled by either the hardware map
or the '--platform' option.
This change addresses issue #62723 and #62560.
Signed-off-by: Manoel Brunnen <manoel.brunnen@ithinx.io>
Before only with --integration such skips were changed to errors.
This hinders issues when twister is call with --all flag in CI
and new skips on integration platforms are not caught. Then those
skips cause errors in other PRs when --integration was used.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The value of emulation_platforms is a bool corresponding to
--emulation-only CLI option. Therefore, it should be registered
as Filters.CMD_LINE. Without it, twister raises errors when an
integration platform is descoped due to this option.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Added an exception to scl.py module, to not process an empty
yaml file, because of error from pykwalify. New exception
is handled when processing quarantine files, to allow
an empty file.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Simple refactoring aiming to reduce the average method length.
Minor corrections of the handlers module, removing wholly unused
variables, etc.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Allow to specify a list of pytest directories, files or subtests
with pytest_root keyword in test yaml.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Previously, only the main src/ directories was scanned for
ZTest testsuite names and tests. This allows us to place
test sources in subdirectories as well.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
