The default exponent is 0, will cause twt setup quick failed,
set exponent value derived from twt interval to fix it.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Add device definitions in dt to test drivers that handle
multiple "compatible"s by a single driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Compilation will fail if multiple models are used at the same time.
Changing to define different unique names for the symbols
to avoid conflicts.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
In the case of IPV6 not enabled, when NET_SOCKETS_PACKET is enabled,
the sizeof(struct sockarr) will change to 20, the value of
MCUMGR_TRANSPORT_NETBUF_MIN_USER_DATA_SIZE is 8, which is not able
to pass the compilation, so I change its default value to 20.
Fixes#82757
Signed-off-by: Hongquan Li <hongquan.prog@gmail.com>
Add preprocessor function that returns 'y' if any enabled node with
compat does NOT have a certain property. This is different from using
dt_compat_any_has_prop to check that they ALL don't have the property.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add WIFI_SAP_IFACE_NO_IR state to keep same as hostapd_iface_state,
which is updated as the hostap upmerge.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
For CMD 'wifi ap status', removing HAPD related definition to make it
more commonly used for non-supplicant case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
For the latest upstream, if MBEDTLS_ENABLE_HEAP is not enabled, it will
default select MBEDTLS_PSA_STATIC_KEY_SLOTS, and consume extra SRAM for
about 35KB. Therefore, default enable MBEDTLS_ENABLE_HEAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Don't check 'HEAP_MEM_POOL_SIZE != 0', as HEAP_MEM_POOL_SIZE might be 0,
but HEAP_MEM_POOL_ADD_SIZE_xxx is defined, which means the actual heap
size is not zero. So check KERNEL_MEM_POOL instead.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove CONFIG_HEAP_MEM_POOL_SIZE for RW612, it will use
HEAP_MEM_POOL_ADD_SIZE_ way to add all module's heap size
together, to better control heap size for different case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Use HEAP_MEM_POOL_ADD_SIZE_ to add heap for NXP Wi-Fi. For supplicant
case, define less heap, as CONFIG_HEAP_MEM_POOL_ADD_SIZE_HOSTAP and
CONFIG_HEAP_MEM_POOL_ADD_SIZE_SOCKETPAIR are also enabled.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Set TWT response parameters to zero to avoid
uninitialized values and ensure correct behavior.
Signed-off-by: Triveni Danda <triveni.danda@nordicsemi.no>
Pretty print XML reports with tab identation on levels for better
readability and ease text diff there as well.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The testcase.classname properties in `twister_report.xml` and
`twister_suite_report.xml` now contain the full testsuite name
(without its path prefix) instead of just two its dot-separated
leftmost components. This way `twister_report.xml` testsuite container
has no duplicate testcase elements with the same `classname` and `name`
properties executing with --no-detailed-test-id for a project with same
testcase names in its 'sibling' suites, for example`tests/kernel/sleep`.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Extend `--no-detailed-test-id` command line option: in addition to its
current behavior to exclude from a test Suite name its configuration path
prefix, also don't prefix each Ztest Case name with its Scenario name.
For example: 'kernel.common.timing' Scenario name, the same Suite name,
and 'sleep.usleep' test Case (where 'sleep' is its Ztest suite name
and 'usleep' is Ztest test name.
This way both TestSuite and TestCase names follow the same principle
having no parent object name prefix.
There is no information loss in Twister reports with this naming:
TestSuite is a container object for its TestCases, whereas TestSuite
has its configuration path as a property.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Currently, MT25 flashes were running in 3-byte mode.
This is not compatible with the chip we use in our project (MT25QU01GBBB),
as only 128 Mbit of its 1 Gbit can be addressed.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
The user data size of the RFCOMM tx pool is zero. There is not enough
space to put the tx_meta data. Use CONFIG_BT_CONN_TX_USER_DATA_SIZE to
set the data size for the RFCOMM tx pool.
Signed-off-by: Make Shi <make.shi@nxp.com>
These functions can be used to join pthreads in a non-standard way.
The function pthread_tryjoin will not block and simply test whether the
thread has exited already. The function pthread_timed_join will only block
until the specified time. The functions are wrappers for calling the
k_thread_join with timeout K_NO_WAIT and with a specific timeout as opposed
to calling it with K_FOREVER.
Signed-off-by: Cla Galliard <clamattia@gmail.com>
