A board-level Kconfig option was defined in the Kconfig.defconfig file.
Move it to a board-level Kconfig file.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The defconfig files are just used to change defaults, not to define any
new Kconfig nodes.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The XEN_INITIAL_DOMAIN option was defined at board level, however, some
drivers such as the XEN serial driver has dependencies on
XEN_INITIAL_DOMAIN, meaning any new board has to define its own copy of
XEN_INITIAL_DOMAIN. Move the option to SoC Kconfig.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The help for MCHP_ECIA_XEC is defined in
drivers/interrupt_controller/Kconfig.xec. defconfig files must not
re-define prompts or help, just modify the default value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The SoC Kconfig.defconfig.series files re-defined multiple Kconfig help
entries. The help for such symbols should only be present in places
where symbol is actually defined, not where the defaults are changed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Kconfig entries used for changing an option default value should not
re-define the option prompt. We should probably introduce a check for
that (any option has a single prompt and help).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove issues related to the backporting of fixes to the 1.14 branch as
they are not related to the 3.0 release.
Signed-off-by: Dan Kalowsky <dank@deadmime.org>
Add details to the release note about Cortex-R behavioral changes and
the general arm MPU use of CMSIS versus the older inline assembler.
Signed-off-by: Dan Kalowsky <dank@deadmime.org>
Firmware uploading to the host may not always be desired,
disable it by default.
Enable it for existing USB DFU sample to keep
the usual behavior, add note about new option to README.rst.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rename confusing UPLOAD_FLASH_AREA_ID to DOWNLOAD_FLASH_AREA_ID
as it is area where firmware image is downloaded.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
It is possible that the actual data stage length of
the control transfer is zero, in that case we do not
need an additional ZLP packet.
This fixes a problem with USB DFU, where after an upload
the device is no longer responsive if upload size is
multiple of control endpoint MPS.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clang introduced _Generic support in 3.0 but it was buggy until
3.8. Updated guard to not use _Generic in clang < 3.8.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The second and third bytes of the packaged string headers
have new meanings after support for fully self-contained
(fsc) packaged string was added in commit
5d80cbae59. So update
the document to reflect this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix an issue where a test's suite name was misspelled and thus the
test never ran because it wasn't associated with a suite. Example:
ZTEST_SUITE(my_suite, NULL, NULL, NULL, NULL, NULL);
ZTEST(myy_suite, test)
{
}
The above will no longer pass since `myy_suite` with a double `y` will
fail the verification.
Signed-off-by: Yuval Peress <peress@google.com>
This fix a typo where incorrect member of bt_keys was used for
checking if LTK is present. This was resulting in bogus results
depending on connection role and current identity used.
This was affecting L2CAP/LE/CFC/BV-25-C qualification test case.
Fixes: #42862
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Periodic advertising sync may be created with CTE type filtering
enabled. When received AUX_SYNC_IND, there are HCI_LE_Periodic_-
Advertising_Sync_Established and HCI_LE_Periodic_Advertising_Report
events generated. In case received AUX_SYNC_IND has wrong CTE type,
HCI_LE_Periodic_Advertising_Sync_Established event is generated.
There may not be HCI_LE_Periodic_Advertising_Report event generated.
In this case node_rx, prepared by LLL, was not released in ULL.
It was lost in ull_sync_established_report.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add missing integration plaforms in direction finding samples.
There were no nRF52820 and nRF5340 added.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction finding connectionless RX sample didn't fit into
nRF52820 SRAM. The sample will not be able to store IQ samples
for maximum number of CTEs allowed by Bluetooth Core 5.3
specification.
For nRF52820 the new allowed maximum number of scanned CTEs
is set to one, to save more space in SRAM for an application.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
CONFIG_BT_CTLR_DF_CTE_RX is enabled by default if CONFIG_BT_CLTR_DF
is enabled and there is support for DF in given SOC.
If CONFIG_BT_CTLR_DF_SCAN_CTE_RX is disabled then the CONFIG_BT_CTLR-
_PER_SCAN_CTE_NUM_MAX is not available.
It causes build errors if that particular configuration is used by
an application. It was a case for example in split builds of direction
finding connectionless TX sample application were periodic advertising
was enabled but perddioc advertising sync was disabled.
The commit fixes the problem.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix problem with building sample applications where Host is
split from Controller into separate binaries. In that situation
samples does not have access to controllers Kconfig options.
To optimize memory usage by an application, disable not needed
features (angle of arrival or angle of departure).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add missing integration plaforms in direction finding samples.
There were no nRF52820 and nRF5340 added.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To give control over GPIO pins for Direction Finding Extension of
Radio peripheral when build for nRF53 network core, the application
core has to assign those pins to network core.
There is a mechanism that uses a device tree overlay to get
information about GPIO pins to be assigned to network core.
The commit adds overlays with appropriate configuration
to assign GPIO pins in all DF related samples.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The problem with append is that when doing incremental (non-clean)
build, the content of these files are appended each time to the previous
leftover content.
Example:
# west build -p -b qemu_cortex_m3 \
samples/application_development/code_relocation/
# // disable for example CONFIG_XIP
# west build -b qemu_cortex_m3 \
samples/application_development/code_relocation/
at this point the content of the generated files (i.e.
linker_relocate.ld) is wrong.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Use an SVG based logo with embedded style that toggles title color using
media queries. The SVG logo is not exactly the same as the previous one
as I only had this version in SVG (taken from docs actually).
Note that we cannot use the method described in
https://github.blog/changelog/
2021-11-24-specify-theme-context-for-images-in-markdown/ because the
README is written in rst, not Markdown.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
