Change sys_pm_force_power_state only works for the current ongoing
suspend operation, before the end of syspend state forced_pm_state
will be cleared.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
I2C interrupts usage should be the preferred way. This commit
enables them by default in the STM32 I2C driver itself.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use f-strings instead of .format() to makes all the macro identifier and
multiline comment building easier to read.
f-strings were added in Python 3.6, which is required by Zephyr now.
Convert some
... + "_" + ...
string building to f-strings as well.
f-strings are a bit faster too (because they avoid format()/str()
lookups), though it's not likely to be noticeable here.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The MQTT connection is closed in case an mqtt_ping fails anyway, so
it's better to let the application know early that something went
wrong.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly-introduced stuff.
Also clean up headers to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
During the first real test of my manual by another developer,
I found out that it would be better to update sequence of events.
Also found out misprints, and some actions was not so obvious.
Corrected manual to be more green developers friendly.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
CONSOLE_HANDLER was unconditionally selecting UART_INTERRUPT_DRIVEN (and
depends on it in the code), but UART_INTERRUPT_DRIVEN depends on
SERIAL && SERIAL_SUPPORT_INTERRUPT.
Add a SERIAL_SUPPORT_INTERRUPT dependency to CONSOLE_HANDLER.
CONSOLE_HANDLER already depends on UART_CONSOLE, which depends on
SERIAL, so a SERIAL dependency does not need to be added.
This avoids some selects with unsatisfied dependencies in CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Have SHELL_BACKEND_RTT depend on USE_SEGGER_RTT instead of selecting it,
to fix some selects of USE_SEGGER_RTT with unsatisfied dependencies.
USE_SEGGER_RTT was being forced on without checking HAS_SEGGER_RTT.
This means configuration files now have to enable both USE_SEGGER_RTT
and SHELL_BACKEND_RTT to enable SHELL_BACKEND_RTT. At least
samples/subsys/shell/shell_module/prj_minimal_rtt.conf does.
(The original version of this commit added a dependency on
HAS_SEGGER_RTT to SHELL_BACKEND_RTT instead, but Krzysztof Chruscinski
suggested depending on USE_SEGGER_RTT instead.)
Footnote: 'depends on' conditions get propagated to properties, so this
change is the same as adding '... if USE_SEGGER_RTT' to all properties
(and the prompt).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
commit 971ae59913 ("net: pkt: Make sure iface is not null when
accessing L2") fixed net_if_l2 where iface was NULL, however if
iface->if_dev is NULL, the check breaks and returns an offset of
NULL (0x82 or so). This is incorrect.
Let's add a check for iface->if_dev as well.
Signed-off-by: Michael Scott <mike@foundries.io>
Fixes an issue where calling z_thread_malloc() would
borrow the resource pool of whatever thread happened
to be interrupted at the time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add the user button to the device tree of nucleo_l452re board.
This button is wire to the pin PC13 of STM32L452
Signed-off-by: Julien D'ascenzio <julien.dascenzio@paratronic.fr>
Silicon Labs EFM32GG11B SoCs have more USART ports than
currently supported by the driver. Driver expanded with
support for USART4 and USART5.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Ethernet MAC present in Silicon Labs EFM32GG11B4xx and
EFM32GG11B8xx SoCs.
DMA based driver with support for link up/down detection.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
This commit adds initial support for the Silicon Labs EFM32
Giant Gecko GG11 StarterKit.
Features supported for now are NVIC, SysTick, GPIO, Flash,
Counter, I2C, UART and Ethernet. Support for Watchdog and
ADC will follow as soon as their respective PRs are merged.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Use f-strings instead of .format() to make things more readable. They
were added in Python 3.6, which Zephyr requires now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define a binding for the Bosch BMA280 sensor. Remove the Kconfig
settings and update the driver to use the devicetree information.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
As mDNS requests set DNS id to 0, we cannot use it to match
the DNS response packet. In order to allow this functionality,
create a hash from query name and type, and use that together
with DNS id to match request and response.
Fixes#21914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Merge all the information into 'description:' and remove 'title:'.
Gets rid of a deprecation warning.
See commit 2934ee2cda ("dts: bindings: Remove 'title:' and put all info.
into 'description:'").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Show which dependencies are unsatisfied when symbols don't get their
assigned value.
For example, assume that FOO below is assigned with CONFIG_FOO=y. Note
that BAR, BAZ, and STR = "hmm" are 'n'.
config FOO
bool "foo"
depends on BAR && BAZ && QAZ && STR = "hmm"
config BAR
def_bool n
config BAZ
def_bool n
config QAZ
def_bool y
config STR
def_string "zmh"
This now prints this warning:
warning: FOO (defined at /home/ulf/z/z/Kconfig:10) was assigned the
value 'y' but got the value 'n'. Check these unsatisfied
dependencies: BAR (=n), BAZ (=n), STR = "hmm" (=n). See ...
Fixes: #21888
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add an opt-in feature that will generate a Makefile with build
variables like CC, and KBUILD_CFLAGS for consumption by third-party
Make-based build systems.
This emulates the 'outputexports' target that KBuild supported and is
supported for the same reasons that KBuild supported it. Easier
integration with third-party build systems.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A neighbor solicitation packet for an address that is not ours should
not cause the sender to be added to the neighbor cache. See RFC 4861
section 7.2.3.
Add the neighbor to the cache when we have decided to respond to the
NS packet.
Fixes#21869.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Use the same code when parsing source link-layer address option for
both RA and NS packets. It looked like handle_ns_neighbor() could
actually read too much data into lladdr.addr when handling 8-byte
addresses (802.15.4).
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Echo-server sample should not bail out on failed
accept() calls. This sample should close socket
in case of any errors and keep listening on socket
for further incoming connections.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current sample certs and keys are not signed. Adding
signed certificates and keys. CA file also added.
This helps users to test with different kind of
configurations.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Sort by testcase name and path and not by platforms. This way we do not
have the same platform executing on CI system causing failures to
overload.
Right now we have almost all qemu targets executing on 1 or 2 nodes,
causing those systems to be overloaded. Instead of taking the default
sorting by platforms, we now sort by testcases, so the distribution is
more "random", but still reproducible.
Remove the ordering function that would put native_posix in the first
set, it is not being used anymore.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ELM FatFS implementation supports LFN, enabled via ffconf.h
configuration file. Additionally, code page (character set),
max file name length, and memory mode (LFN working buffer location)
are configurable options closely related to LFN.
Without LFN filenames are restricted to 8.3 filename format.
Add kconfig options to expose following FatFS configurations:
enable LFN, specify max filename length, specify code page
(character set), specify LFN working buffer location.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Fix assert in net_buf triggered on att encrypt change event.
ASSERTION FAIL [net_buf_simple_headroom(buf) >= len] @
ZEPHYR_BASE/subsys/net/buf.c:881
This happens because when the att request was allocated, it was not
properly initialized and req->retrying was left as true.
This caused the att encrypt change handling to assume an att request
needed to be resent, starting resending with an invalid request and
request buffer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fixes some selects with unsatisfied dependencies. FLASH_SHELL depends on
FLASH_PAGE_LAYOUT, but only FLASH_SHELL is selected. The select was
introduced in commit 3aa2a1c6db ("flash: make flash shell generic").
Spoke to Johan Hedberg. The BT_SHELL code does not depend on
FLASH_SHELL. He didn't think people would assume that BT_SHELL by itself
enables the FLASH_SHELL commands either.
Just remove the select.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
After startup the native_posix flash was filed by 0x00 instead
of 0xff, which is not coherent with erased byte value which
is 0xff for the native_posix target.
Such inconsistent behavior makes for instance running
a storage system designed(or configured) for a flash device
with 0xff as erased byte values problematic.
This patch makes flash erased after new flash device file creation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
In some cases the config is already provided for us e.g. when setting
OPENOCD_NRF5_SUBFAMILY. Also it looks like config was always supposed to
be optional (there are checks for it on do_run()).
Signed-off-by: Rihards Skuja <rihardssk@mikrotik.com>
Zephyr aims to enable supporting of multiple SW defined
BLE LL. There is a complex hierarchy of defines in the
CMake files controlling the compilation units that part of
the final library. Adding another SW LL implementation
from a different SoC provider will make the main controller
CMake file unmaintable.
As such, split the into vendor-specific CMake files for
easier additions.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
With a recent change introduced a connectable advertiser will reserve
a connection object when started. In the disconnected callback the
disconnected connection object is not yet released, so the application
is not able to allocate this connection object for a new connectable
advertiser until after the disconnected callback.
reserve conn commit: 46bf20036a
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
I think a lot of the confusion with promptless symbols being assigned
might come from opening zephyr/.config, seeing that it assigns a bunch
of promptless symbols, and assuming that Kconfig must respect those
assignments, even though it doesn't.
Explain why zephyr/.config assigns promptless symbols (it's because it
doubles as configuration output). That should clarify things a bit.
Also mention what "invisible" means for symbols early on in the page.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
openocd linker sections are not supposed to be part of the
vector table sections. Place the sections after we define
the _vector_end linker symbol.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit does the following:
- renames the 'text' ROM section to 'rom_start', to reflect
that this section is the first section of the image.
- renames the 'TEXT_SECTION_NAME_2' section to 'text', since
that section (whose start is pointed by _image_text_start)
holds the entire image text section.
The commit removes the confusion by having multiple ROM sections
named as 'text' in ARM Cortex-M builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
We should not use indentation for pre-processor directives.
This commit fixes the indentation in the ARM Cortex-M linker
script.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The PrimeCell UART (PL011) IP can use one single combined/shared
interrupt line instead than different IRQ lines for TX/RX/Err/... This
is the most common configuration supported in the Linux world but not
currently supported in Zephyr. QEMU emulates a PL011 UART with a single
interrupt line as well.
To support this configuration we have to hookup the PL011 driver with a
shared IRQ driver and add two new configuration options when the shared
IRQ line is used.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change adds missing Kconfig dependency.
The CONFIG_BT_CTLR_FILTER is used only for SW Link Layers.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
