This commit exposes k_mem_partition_attr_t outside User Mode, so
we can use struct k_mem_partition for defining memory partitions
outside the scope of user space (for example, to describe thread
stack guards or no-cacheable MPU regions). A requirement is that
the Zephyr build supports Memory protection. To signify this, a
new hidden, all-architecture Kconfig symbol is defined (MPU). In
the wake of exposing k_mem_partition_attr_t, the commit exposes
the MPU architecture-specific access permission attribute macros
outside the User space context (for all ARCHs), so they can be
used in a more generic way.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
There were many platforms where this function was doing nothing. Just
merging its functionality with _PrepC function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
struct k_thread already has a pointer type k_tid_t, there is no need for
this definition to tcs.
Less symbols/names make the code cleaner and more readable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The system tick count is a 64 bit quantity that gets updated from
interrupt context, meaning that it's dangerously non-atomic and has to
be locked. The core kernel clock code did this right.
But the value was also exposed to the rest of the universe as a global
variable, and virtually nothing else was doing this correctly. Even
in the timer ISRs themselves, the interrupts may be themselves
preempted (most of our architectures support nested interrupts) by
code that wants to set timeouts and inspect system uptime.
Define a z_tick_{get,set}() API, eliminate the old variable, and make
sure everyone uses the right mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was another "global variable" API. Give it function syntax too.
Also add a warning, because on nRF devices (at least) the cycle clock
runs in kHz and is too slow to give a precise answer here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Added LOG_PANIC to fault handlers to ensure that log is flush and
logger processes messages in a blocking way in fault handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rather than do that for each architecture, source SoC Kconfigs where the
code is maintained, under ZEPHYR_BASE/soc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The fake exception return is used to jump to user mode.
So the init status of user thread is in exception mode.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
stack check bit of status32/sec_stat will be cleared
automically in exception entry.
so remove the redundent codes
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The benchmark application timing_info needs certain hooks to be
present in the kernel to get the accurate measurements. This
patch adds these hook at all the required locations.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This enables reserving little space on the top of stack to store
data local to thread when CONFIG_USERSPACE. The first customer
of this is errno.
Note that ARC, due to how it lays out the user stack and
privilege stack, sets the pointer itself rather than
relying on the common way.
Fixes: #9067
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There exist two symbols that became equivalent when PR #9383 was
merged; _SYSCALL_LIMIT and K_SYSCALL_LIMIT. This patch deprecates the
redundant _SYSCALL_LIMIT symbol.
_SYSCALL_LIMIT was initally introduced because before PR #9383 was
merged K_SYSCALL_LIMIT was an enum, which couldn't be included into
assembly files. PR #9383 converted it into a define, which can be
included into assembly files, making _SYSCALL_LIMIT redundant.
Likewise for _SYSCALL_BAD.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This code path for returning from an exception wasn't
updating ERET with ESF->pc, resulting in any updates to
the PC by the fault handler being ignored.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixed the RTC interrupt masking issue on Deep Sleep entry by
explicitly unmasking it on Deep Sleep exit sequence.
Re-oredered the SoC power states such that SYS_POWER_STATE_CPU_LPS is
the lowest possible Low Power State(LPS) and SYS_POWER_STATE_CPU_LPS_2
is the highest possible Low Power State(LPS). This is need to maintain
the LPS state consistency across different architectures.
Also re-mapped the Low Power States and Deep Sleep States as per
Quark SE C1000 data sheet document under Power Management section.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
add nsim soc support, two configs are contained
* em with arc MPUv2
* em with arc SecureShield and MPUv3
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also fix the 'default' on XIP. Due to Zephyr's prefer-later-defaults
behavior, it was always set to 'y' (when the dependencies were
satisfied).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
This symbol was removed by commit 17c6456678 ("drivers/uart: Use dts
to set uart priorities for QMSI driver"). The setting should come from
DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The NSIM symbol was removed in commit 9bc69a46fa ("boards: Update arc
em_starterkit support from 2.2 to 2.3").
Guess that UART_NSIM should be used here now, similar to what was done
in commit 45221a9706 ("serial: nsim: Fix impossible-to-enable
CONFIG_UART_NSIM").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* re-use top of isr stack as exception stack
* bug fixes in irq offload's implementation
* improve kernel oops implementation
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit improves the reset of arc:
* make the processor in the correct status
* clear interrupt related regs
this may improve or fix#6515
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Whether it should hang the system it not decided finally.
But remove it here to let some tests pass.
Fixes#8032
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* use a separate stack for exception handling, this
will gurantee the exception handling always work, not
affected by some speical cases, e.g., stack check exception
or mem. protection exception at the exception entry.
* this commit can fix the second case of #8092
* note: the thread switch is still possible in exception
handling, e.g, caused by thread_abort. But the switched out
thread cannot be recovered, as the thread context is not
setup.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
