This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Application can disable IPv4 or IPv6 later if those are not
needed nor used for a given network interface.
Fixes#14581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
XCC (which is based on GCC 4.2) needs the initializer of
one of the union elements to be enclosed in brackets.
So add them.
Fixes#33549
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
disk/disk_access.h got moved, but there is no compat warning.
Add that so users know they need to update code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In acda9bf9ce new macros were introduced to support a virtual memory
map. Adjust these macros also for AArch64. This also fixes a problem
when building Zephyr when CONFIG_KERNEL_VM_BASE is not the same as
CONFIG_SRAM_BASE_ADDRESS
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This CL introduces the Power Switch Logic (PSL) pads which detect the
wake-up events and turn on/off core power supply (VCC1) for ultra-low
-power consumption in npcx device-tree file.
By adding PSL input-pad objects, psl_in1, psl_in2, and so on, into
'psl-in-pads' property and configuring their 'flag' properties, the
related driver will configure them via soc specific functions later.
For example, if PSL input 1 pad that is plan to detect a 'falling edge'
event, this property should be:
vsby-psl-in-list {
psl-in-pads = <&psl_in1>;
};
And the flag property in psl_in1 should change to
&psl_in1 {
flag = <NPCX_PSL_FALLING_EDGE>;
};
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Commit 0a7b65e tweaked the CREATE_OBJ_LEVEL macro in such a way
that it would break the expected sorting order.
For example if you had 2, 19, 20, 30 as the level, we'd end up sort
these to be 19, 2, 20, 30.
Fix this by adding aditional "_" symbol after the init level counter.
That allows to keep correct sort order (for both GNU and MWDT
toolchains) and distinguish init level counter from section suffix
(for MWDT toolchain).
Fixes zephyrproject-rtos#33464
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The fatal log now contains
- Trap type in human readable representation
- Integer registers visible to the program when trap was taken
- Special register values such as PC and PSR
- Backtrace with PC and SP
If CONFIG_EXTRA_EXCEPTION_INFO is enabled, then all the above is
logged. If not, only the special registers are logged.
The format is inspired by the GRMON debug monitor and TSIM simulator.
A quick guide on how to use the values is in fatal.c.
It now looks like this:
E: tt = 0x02, illegal_instruction
E:
E: INS LOCALS OUTS GLOBALS
E: 0: 00000000 f3900fc0 40007c50 00000000
E: 1: 00000000 40004bf0 40008d30 40008c00
E: 2: 00000000 40004bf4 40008000 00000003
E: 3: 40009158 00000000 40009000 00000002
E: 4: 40008fa8 40003c00 40008fa8 00000008
E: 5: 40009000 f3400fc0 00000000 00000080
E: 6: 4000a1f8 40000050 4000a190 00000000
E: 7: 40002308 00000000 40001fb8 000000c1
E:
E: psr: f30000c7 wim: 00000008 tbr: 40000020 y: 00000000
E: pc: 4000a1f4 npc: 4000a1f8
E:
E: pc sp
E: #0 4000a1f4 4000a190
E: #1 40002308 4000a1f8
E: #2 40003b24 4000a258
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Introduce a new software trap 15 which is generated by the
ARCH_EXCEPT() function macro.
The handler for this software trap calls z_sparc_fatal_error() and
finally z_fatal_error() with "reason" and ESF as arguments.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
There was an inconsistency in the API as z_nrf_rtc_timer_chan_alloc
returned int but other function were using uint32_t for channel
argument. Updated api to use int32_t everywhere.
Update nrf_802154 driver which was using this api to use int32_t.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This patch replaces ENOSYS into ENOTSUP to keep consistency with
the return value specification of k_float_enable().
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch introduce new API to enable FPU of thread. This is pair of
existed k_float_disable() API. And also add empty arch_float_enable()
into each architectures that have arch_float_disable(). The arc and
riscv already implemented arch_float_enable() so I do not touch
these implementations.
Motivation: Current Zephyr implementation does not allow to use FPU
on main and other system threads like as work queue. Users need to
create an other thread with K_FP_REGS for floating point programs.
Users can use FPU more easily if they can enable FPU on running
threads.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This symbol is reserved and usage of reserved symbols violates the
coding guidelines. (MISRA 21.2)
NAME
signal - ANSI C signal handling
SYNOPSIS
#include <signal.h>
sighandler_t signal(int signum, sighandler_t handler);
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We are setting CONFIG_GEN_PRIV_STACKS when AArch64 actually uses a
statically allocated privileged stack.
This error was not captured by the tests because we only verify whether
a read/write to a privileged stack is failing, but it can fail for a lot
of reasons including when the pointer to the privileged stack is not
initialized at all, like in this case.
With this patch we deselect CONFIG_GEN_PRIV_STACKS and we fix the
mem_protect/userspace test to correctly probe the privileged stack.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
* Rename CPU_ARCV2 to ISA_ARCV2. That helps to avoid conflict between
CPU families naming and ISAs naming and aligns this options
with other ARC OSS projects.
* Generalize ARCV2 check to ARC check where it is required.
NOTE: we add ISA_ARCV2 option in a choice list as a preparation
for ISA_ARCV3 addition.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The Configuration Client doesn't check the address in a received
response. This means that a response from any device will be accepted.
This change ensures that the correct response will be accepted.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Shell uninitialization is not synchronous, it is deferred to shell
thread so resources used by the shell (e.g. transport resource like
uart) cannot be used until it is completed. Added callback which
notifies when all resources are released and shell is uninitialized.
Callback is called from shell thread just before it is aborted.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add Z_SHELL_SET_FLAG_ATOMIC macro to use technique from
shell_process() to atomically set and return the previous
value.
Change all void z_flag_*_set() functions to bool z_flag_*_set()
and use macro to return previous value after setting.
Modify shell_process() to use this modified z_flag_processing_set()
function.
Reorder flags to keep last_nl on byte boundary.
Add public setters for insert_mode, echo, and mode_delete for
completeness.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Add flag to shell_flags to control echo as obscure
character (for passwords) or not. Add setter and getter
functions. Modify shell echo to use this flag if set.
Also add public setter for color mode and obscure mode.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Channel direction was actually a source of confusion since the spec does
actually define the data path direction from controller point of view
meaning input actually means transmit and output receive, also direction
can be configured with different QoS settings.
To make these APIs less confusing and allow QoS to be configured
independently they are now split into RX (receiving) and TX
(transmission) settings including its data path.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes bt_iso_cleanup when there are still channels bound to the
ACL connection.
On top of it introduce bt_iso_chan_unbind which can be used to unbind
channels and thus release the reference to the ACL connection if that
has not been disconnected in which case the channels are unbind
automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add initial support for the Cortex-M55 Core which is an implementation
of the Armv8.1-M mainline architecture and includes support for the
M‑profile Vector Extension (MVE).
The support is based on the Cortex-M33 support that already exists in
Zephyr.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
net_eth_carrier_on() and net_eth_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
While at it, save network interface pointer during ethernet context
initialization, so that is becomes static (and thread-safe) during whole
ethernet context lifetime.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
net_ppp_carrier_on() and net_ppp_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
MWDT toolchain adds additional suffix to sections name
in case of ffunction-sections / fdata-sections are enabled.
Let's pick a single set of rules and syntax that work.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
New macro GROUP_ROM_LINK_IN for text/rodata sections
New macro GROUP_NOLOAD_LINK_IN for bss/noinit sections
GROUP_FOLLOWS_AT is unused anywhere in the kernel for
years now and has been removed.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Zephyr already has a directory for storage API relevant headers.
Move disk_access.h header to include/storage where it fits better
structurally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move disk driver interface to own header and
separate disk access interface and disk driver interface.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements the secondary service
Volume Offset Control Service (VOCS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since linker_final_pass.cmd is the actual linker script being
used to link the final Zephyr binary, rename it to linker.cmd.
This also renames LINKER_PASS2 to LINKER_ZEPHYR_FINAL simply
to clarify what it is used for, instead of ambiguous pass #n.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using this actually would result in a linker input section being
put between output sections which is not correct syntax.
We have never seen this simply because the generated ones would
be included instead of the in-tree ones. So remove this just in
case, instead of linker errors.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Create a separate sub group for constraint APIs. This way it is
possible to reference this api directly in the power management
reference without mess with the rest of the documentation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Put documentation about pm_power_state_set in the proper group,
power_management_hook_interface.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Allow callers to wait for an arbitrary amount of time, instead of always
waiting for a compile-time fixed period.
Signed-off-by: Josh Gao <josh@jmgao.dev>
Removed k_pipe_block_put and static functions only related to it.
After all the old usage of k_mem_block has been replaced by k_heap,
k_pipe_block_put still taking a deprecated k_mem_block as argument
becomes dead code. All APIs that hook it from kernel.h have been
confirmed to be removed. Since an asynchronous message descriptor
is only allocated in k_pipe_block_put, static functions for pipe_
async are removed as well.
Signed-off-by: Shihao Shen <shihao.shen@intel.com>
This patch includes initial support for FT800 display driver.
It includes basic features. It can be easily extended with more
FT800 display list and co-processor features.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
STATUS32.DZ(bit 13) is the EV_DivZero exception enable bit, and it's
not enabled by default. we need to set it explicitly to enable divide
zero exception on early boot and each thread's setup.
The DZ bit is ignored on write and read as zero when there is no
hardware division configured. So we can simply set DZ bit even if
there is no hardware division configured.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
