Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introducing PPP dialup features to enable e.g. usage of nrf9160
based board as a dialup modem for transferring ip data over PPP
(e.g. windows dial up), i.e. usage of Zephyr PPP as a server for
providing MTU/MRU, IP address and DNS addresses for a PC:
- PPP LCP MRU option (configurable)
- PPP server: IPCP ip and dns address peer options to enable
providing IP and DNS addresses for PPP peer.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
When PPP is muxed, using uart_poll_out resulted in each byte getting
wrapped in a muxing header. This led to UART bombardment which
can quickly cause some modems to hang and panic. This was observed
regularly using a SIMCOM7600E modem.
A perfect fix would involve rewriting ppp.c, uart_mux.c and
modem_iface_uart.c to all use another UART API, but that would be more
invasive by several orders of magnitude than this one, which utilizes
the fact that the uart_mux implementation of uart_fifo_fill does NOT
require ISR context. Since the Zephyr UART API states that the behavior
of uart_fifo_fill outside of ISR context is implementation defined, this
should be kosher.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
These changes enable applications to restart the networking stack which
was previously not possible without rebooting the device. This was a
major show-stopper because it made power management impossible, and
furthermore made it impossible to recover from a bad modem state without
rebooting.
This has been verified to work on a SIMCOM7600E modem, both with and
without CONFIG_GSM_MUX enabled.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
This commit fixes the following issue:
When using slip without TAP, i.e. CONFIG_SLIP_TAP=n (default), while
another ethernet interface is enabled and sets CONFIG_NET_L2_ETHERNET=y.
This causes ethernet_init() to be wrongly called with struct dummy_api
instead of struct ethernet_api.
ethernet_init() expects struct ethernet_api (by cast), so we end up
with the get_capabilities field pointing to garbage!
Actually, as we are using the dummy api, we don't need to call
ethernet_init() at all.
Sole dependency on CONFIG_NET_L2_ETHERNET is wrong because it
can be enabled by another interface.
Signed-off-by: David Komel <a8961713@gmail.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
PPP implementation uses ring_buffer API, but RING_BUFFER Kconfig option
was not selected so far. This resulted in linker errors about undefined
reference to `ring_buf_get_claim' and 'ring_buf_put'.
Add missing RING_BUFFER selection via Kconfig, so PPP driver is properly
built.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
ringbuf claim API returns pointer to contiguous area. In cases when data
in ringbuf wraps the end of internal buffer, then single call to claim
data is not enough to get all data - there is remaining part on the
beginning of internal buffer. Those remaining bytes will need to wait
for next ISR handler to trigger workqueue. Theoretically this means that
data on the beginning of ringbuf can wait there forever, or simply to
the next timeout in PPP stack when data traffic continues.
Consume data from ringbuf in a loop, stopping only when claiming results
in empty buffer. This will make sure that there is no stale data in the
ringbuf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Claimed ringbuf bytes were parsed until first frame was detected, but
remaining data in the claimed area was just ignored / lost.
Continue parsing bytes to the end of claimed area after each detected
frame.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
By default PPP interface is not taken up automatically but only
after the PPP connection to modem is ready.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Implement uart_pipe functionality for the modem so that it
integrates with the PPP implementation.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Before establishing the ppp connection, windows sends the string CLIENT
and expects the reply CLIENTSERVER from the modem.
This functionality is implemented in the new function
ppp_handle_client().
This feature must be enabled via Kconfig.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit 184e251fdb ("slip: Add driver for host to qemu
connectivity"), then moved to drivers/net/Kconfig in commit 0612651deb
("drivers: slip: Consolidate under drivers/net/"). Never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit aa46bac54c ("drivers: net: ppp: Driver for
point-to-point protocol"). Never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit aa46bac54c ("drivers: net: ppp: Driver for
point-to-point protocol"). Never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For example it should be possible to compile and use the SLIP module
with NET_L2_DUMMY. This required the following changes:
* Fix a typo in the initializer for struct dummy_api
* Only define eth_capabilities if CONFIG_NET_L2_ETHERNET is defined to
silence a -Wunused-function compiler warning
* Unconditionally include net/dummy.h
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Without this change compilation of the SLIP module would fail if LLDP
wasn't enabled. There is also no need to include net/lldp.h explicitly
as net/ethernet.h will include it conditionally if CONFIG_NET_LLDP is
defined.
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is no need to reserve any space for each frag, as the l2 will
allocate a frag for the ethernet header, arp will do the same.
This is one step further to removing the concept of ll reserve.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce new Kconfig option for selecting either slip or ethernet
connectivity to host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
