In the current implementation, the LLEXT linker will only apply
relocations targeting a given symbol if it has a specfic symbol type.
This is overzealous and causes issues on some platforms, as some symbols
that need to be relocated are skipped due to being of a "bad" type.
Ignore the symbol type when performing relocation to solve this problem,
but also add checks to ensure we don't attempt to relocate symbols with
an invalid section index. If such a relocation is found, return an error
instead of ignoring the relocation entry to ensure that it is impossible
to execute code from a (partially) unrelocated LLEXT.
Also remove all hacks added to circumvent this issue:
* qemu_cortex_r5 exclusion from test cases
* unnecessary exclusion of some flags when building with LLEXT EDK
Fixes#72832.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The RA4M1 Clicker is a basic development board for the Renesas RA4M1
Microcontroller. The board contains J-Link on board, two LEDs and push
buttons and several headers for interfacing with external devices.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
- Adds -U upgrade flag to the install requirements command.
- Fixes a possible documentation generation issue,
reported in https://github.com/zephyrproject-rtos/zephyr/issues/73082
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
In an effort to shave off code size, remove out-of-the-box
enabling of crypto features (except SHA-256).
Configurations are adjusted to enable what they need.
Bonuses:
- When enabled, AES now defaults to using a smaller version
(`CONFIG_MBEDTLS_AES_ROM_TABLES` isn't default enabled anymore,
and if enabled, `CONFIG_MBEDTLS_AES_FEWER_TABLES` defaults to y).
- Conditions around Mbed TLS Kconfig options have been improved
to reflect the reality of the dependencies.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Included the nxp_ke1xz.dtsi file to use the same peripheral info,
and overwrite it for different peripherals
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
This PR corrects the base addresses and region names of some memories
present in the MPS3-AN547 hardware.
Fixes#71920
Signed-off-by: Manuel Loew <manuel.loew.infineon@gmail.com>
Add DMA channels at SOC level for the LPC55S6x series SOCs, as the dma
requests are SOC specific properties and do not need to be modified at
the board level. Remove any DMA request definitions present at the board
level for the LPC55S69 evaluation board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some IPv4/IPv6 functions were ifdef-sliced internally, despite being
compiled in conditionally in top-level #ifdef block under the same
condition.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In some cases the comment after #endif did not match the opening #if, in
some cases it was missing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow user to specify resource string using wildcard characters
so that multiple URL paths can be served with just one handler.
Fixes#73367
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Modify the BAP and PBP samples to start with the profile name
(BAP or PBP) and the role of the sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP broadcast source sample did not properly use
parentheses for the macro, potentially causing issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is no point in having heap validation enabled but without asserts,
as nothing is reported to the user.
Add this dependency to make sure this option is useful.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Currently calls to these two functions fail unnecessarily when
CONFIG_BT_SMP is disabled. This fix allows identity resets
without having the BT_SMP stack enabled. The primary use case
is enabling random mac address rotation for privacy in memory
constrained SOCs. Fixes#73313
Signed-off-by: Patrick Patel <ppatel@micro-design.com>
Define the configuration to run the code_relocation
application on the external memory octo flash
of the stm32u585 or stm32h7b3i disco kit in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Declare a sub-region of the whole ext_memory with attributes
ATTR_MPU_IO so that XiP becomes possible on this external
octo- NOR flash. Use the STM32CubeProgrammer runner
with the external loader for flashing.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Declare a sub-region of the whole ext_memory with attributes
ATTR_MPU_IO so that XiP becomes possible on this external
octo- NOR flash. Use the STM32CubeProgrammer runner
with the external loader for flashing.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This change is aborting the memoryMapped mode of the octo-flash
before erasing or writing the NOR. Operations are performed in
command mode.
Reading is always performed in MemoryMapped mode (memcopy)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Enable the MemoryMapped Mode for the stm32 octoFlash driver
Configure the Flash in MemoryMapped to use in XiP mode.
With this mode the erase and write are not supported.
Address and size are given by the DTS register property.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix missing validation of Connection Update Ind PDU. Ignore
invalid connection update parameters and force a silent
local connection termination.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pin thread to a specific cpu. Once thread gets cpu, check
the cpu id is correct and then thread will give up cpu.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Adds useful context to the charger sample README to help readers
understand what the sample application is doing.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Adds some introductory context to the charger documentation. This
is being aided to help developers understand what a charger device
is and how the charger_driver_api is relevant to system operation.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Create a pseudo-terminal to access Zephyr shell on the audio DSP.
The shell terminal is enabled with "-p" command-line option.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Add a new shell backend implemented over a shared memory window
on the Intel audio DSPs. The implementation uses the Zephyr winstream
to manage the data streaming.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
This duplicates the functionality of device_is_ready.
Calls for z_device_is_ready are being done in kernel mode, so it is
safe to call its implementation directly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Refactored vendor-specific duplicates of uart tx/rx invert properties
into a common dts file uart-controller-pin-inversion.yaml
Signed-off-by: Anuj Pathak <anuj@croxel.com>
This commit has added new flag FS_O_TRUNC to support truncation
during file open. Modified fs_open to handle truncation based on
provided flags. Included unit tests for flag behavior with common
filesystems.
Signed-off-by: RAJAGOPALAN GANGADHARAN <g.raju2000@gmail.com>
