Fixed a dependency from printk.h to logging headers which in
certain configurations could lead to circular dependencies.
Cleaned up printk.c to call z_log_vprintk from vprintk.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Algorithm was failing in case when overflow mode was enabled
but allocation of new message failed. It could happen if message
size exceeded buffer size. Losing track of buffered messages
can lead to logging processing freeze.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
MIPS (Microprocessor without Interlocked Pipelined Stages) is a
instruction set architecture (ISA) developed by MIPS Computer
Systems, now MIPS Technologies.
This commit provides MIPS architecture support to Zephyr. It is
compatible with the MIPS32 Release 1 specification.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reduced logging mode selection to deferred, immediate, minimal and
frontend. Decoupled logging version from mode and created CONFIG_LOG1
which can be used to explicitly select deprecated version.
From now on, chosing CONFIG_LOG_MODE_{IMMEDIATE,DEFERRED} will result
in version2.
Deprecated CONFIG_LOG2_MODE_{IMMEDIATE,DEFERRED} with cmake warning.
Codebase adapted to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When message is dropped then log_process is called with
bypass flag set and additionally z_log_dropped() is called.
In both functions counter of buffered messages was decremented.
That resulted in counter being decremented twice. It resulted
in logging misbehavior after messages being dropped (delayed
processing). Fixing it by decrementing the counter in log_process
only when bypass flag is not set.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use value returned by atomic_inc to decide on action.
Previously direct value was used and that could lead to
delays in logging processing because thread waking up
could be mishandled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Tag can be changed at runtime. Feature is enabled by setting
maximum tag length to positive value. Additionally, default
tag can be configured in Kconfig.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When LOG2 is enabled, timestamp func which was just set
according to various conditions, is overwritten using sysclock.
Since sysclock is very fast, it will cause uint32_t to wrap very
fast and cause the time to start over from 0 often.
This commit combines the two statements doing the same thing,
to one statement.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
A variable is tracking number of buffered messages. This is used
to trigger processing thread in certain cases. Counter was not
handled correctly when message was dropped. In certain cases that
can lead to hanging of log processing.
Added counter decrementation in the callback called whenever
message is dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previously, a `uint32_t` was aliased as an `atomic_t`. However,
with #39531, `atomic_t` is now a `long` under the hood, which
is 64-bit on 64-bit platforms.
Fixes#40369
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
There were some leftovers in logging after attempt to use
logging as tracing backend. Removing all references since it
lead to test compilation failures.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added log_internal.h for internal APIs. Move functions out of
log_core.h. Log_core.h shall have only macros and functions related
to logging message creation. Log_core.h is included by log.h thus
number of dependencies in that headers must be limited to minimum
to allow including without risk of circular dependencies.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_rom_start and _image_rom_end corresponds to the group
ROMABLE_REGION defined in the ld linker scripts.
The symbols _image_rodata_start and _image_rodata_end is not placed as
independent group but covers common-rom.ld, thread-local-storage.ld,
kobject-rom.ld and snippets-rodata.ld.
This commit align those names and prepares for generation of groups in
linker scripts.
The symbols describing the ROMABLE_REGION will be renamed to:
_image_rom_start -> __rom_region_start
_image_rom_end -> __rom_region_end
The rodata will also use the group symbol notation as:
_image_rodata_start -> __rodata_region_start
_image_rodata_end -> __rodata_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add the number of strdup buffers currently in use to the
`log strdup_utilization` shell command.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
It is mainly for testing purposes where logging is multiple times
reinitialized.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extract functions which are managing logging sources
and backends into separate file: log_mgmt.
So far those functions were in log_core mixed with functions
specific to log message creation and log processing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Variable "level" in function z_vrfy_log_filter_set() has type unsigned.
But it is been checked if "level >=LOG_LEVEL_NONE" and
LOG_LEVEL_NONE is 0. It means check if unsigned is ">= 0" in Z_OOPS().
That is logically wrong, because unsigned is ">=0" by default.
Remove that check, to avoid static analysis tool raise
violation
Found as a coding guideline violation (MISRA R14.3) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The final else {} in the if...else if is missing required
comment (non-empty, ';' is not sufficient). This adds a comment
to comply with CG 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Add panic_mode flag reset to log_core_init(). It allows full logging
reinitialization which is useful for testing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixed to ensure that semaphore is not used by the log core
when multithreading is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
NIOS2, RISC-V and SPARC are using _image_rodata_start/_end in
their linker scripts to mark the boundaries of rodata. So
they no loner need special treatment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added implementation of log_msg2 which is creating log messages
using cbprintf packaging and storing them in circular ring buffer
(mpsg_pbuf).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The k_mem_slab_init() calls create_free_list() which checks
the slab block alignment. Noticed with Intel ehl_crb board,
which is 64-bit architecture, that the k_mem_slab_init() fails
because the log_strdup_buf items were not aligned properly.
This commit adds the alignment requirement to log_strdup_buf so
that the elements are alignment properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
In modes where string duplication is not used, the code is
still compiled. On some compilers it was failing due to calling
strncpy which will do nothing because n is 0. Increase
CONFIG_LOG_STRDUP_MAX_STRING to 2 to ensure that n is 1 in that
case
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Change fixes an issue related to data access out of array bounds and
suppresses compiler warning.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Previously, a racing write to the provided metadata could result
in up to CONFIG_LOG_STRDUP_MAX_STRING-2 bytes after the
end of user-accessible memory being leaked into the strdup pool
or the resulting log.
For now, explicitly copy the metadata string. In an ideal world
this could directly copy from userspace into the strdup buffer, but
this obviously only works if strdup is enabled.
Signed-off-by: James Harris <james.harris@intel.com>
The definition of lock, k_spinlock type, that has been used to guard
variables holding statistical data for log_strdup has been missing
static modifier, which caused the lock structure to be reallocated
on stack each time an execution entered the block.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
is_rodata() can now determine if an object is the rodata section
on SPARC. This eliminates spurious run-time error messages about
"missinglog_strdup()".
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The logging subsytsem had if else if constructs without final
else statement. This commit adds else {} to comply with
coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
va_list was initialized once and passed to log_backend_put_sync_string()
for each logging backend. State of such va_list was changed in each
execution, resulting in different va_list state to be passed for
consecutive log_backend_put_sync_string() calls. This results in
undefined behavior and program crashes.
Use va_copy() to copy va_list state to temporary variable for each
logging backend and keep original va_list untouched. Pass such temporary
state to log_backend_put_sync_string() to make sure state for all
consecutive calls does not change.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope.
The log output instances all named "log_output" in backends
collide with the "log_output" parameter of various functions.
This renames the variables in the backends to make them
more descriptive. Same goes for the buffers for some of
these instances as they are all named "buf", and "hostname"
being used in the network backend, so they are renamed.
There are a few places where variables are overriden within
an inner scope (e.g. inside loop and if block) so they are
also renamed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
