Add driver for the TI TCAN4x5x series of CAN controllers. These CAN
controllers are based on the Bosch M_CAN IP and interfaced via an SPI bus.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add devicetree binding for the TI TCAN4x5x series of CAN controllers. These
CAN controllers are based on the Bosch M_CAN IP and interfaced via a SPI
bus.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Create dac_mcxu_lpdac.c file to implement mcux lpdac, add binding for
the mcux lpdac, update Kconfig.mcux and CMakeLists.txt file to support
mcux lpdac.
Signed-off-by: Albort Xue <yao.xue@nxp.com>
Reset the device on initializing if reset-node is available in dts.
`snps,desingware-i2c` does not define reset-node itself.
Add more of an element that inherits `reset-device.yaml` to
the `compatible` section to allow defining the reset-node
for using this feature.
For example.
```
compatible = "reset-device-inherit-node", "snps,designware-i2c";
```
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This MCU has a classical CAN controller, which was previously not
enabled.
I2C2 is disabled by default because it uses the same pins as CAN and
there are no other free pins that can be used for CAN.
Signed-off-by: Martin Jäger <martin@libre.solar>
This adds endpoint by stream lookup function used to find the active
endpoints that use the stream object provided. The function is used
instead of dereferencing stream->ep that may be not valid if application
did not memset the stream object.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Once the application bt_bap_stream_ops.released callback is called make
sure the stream->ep pointer is valid so that application can still access
the endpoint details like e.g. endpoint direction.
Fixes: ASCS/SR/ACP/BV-{24,25,26,27,28,29,30,31}-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When using the LC3 codec, the cid and vid fields of the
codec shall both be 0x00, as per the BAP and ASCS specs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable CONFIG_NET_L2_ETHERNET only when dummy L2 layer is not used.
Otherwise having the two of them enabled will cause failures in some
net tests that expect only dummy L2 layer to be enabled and configured.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
m5stack_core2 enables i2c by default for regulator usage which
conflicts with the test and is therefore excluded from the test.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
This commit resolves an internal dependecy between GET_DIRECTION and
GET_CONFIG configuration. GET_CONFIG api is internally needed by
GET_DIRECTION api.
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
This Pull-Request enables support for the M5Stack Core2 hardware.
The module features a LCD display, touchscreen, battery, USB-Port,
8MB RAM and 16MB Flash.
Basic features are working. Please refere to the board documentation
for details.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
gpio: gpio_axp192: fix dependecy between GET_DIRECTION and GET_CONFIG
configuration
Latest unit gpio get_direction unit test failes, as get_direction api
internally requires get_config functionality. This commit fixes this
dependecy.
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
UniFlash is no longer required for flashing MSP-EXP432P401R, as long as the
XDS110 firmware is updated.
The updated documentation is based on CC3220SF-LAUNCHXL's.
Signed-off-by: Chuang Zhu <git@chuang.cz>
The Nuvoton NCT38xx is a multi-function device providing a TCPC
controller and a I/O expander (GPIO driver). Add a multi-function
driver to manage exclusive access to the device.
Tested with "twister -T tests/drivers/build_all/gpio".
Signed-off-by: Keith Short <keithshort@google.com>
the sam xdmac driver does not yet implement the
get_status() function. with this commit the function
will be implemented. Fixes#62003
Signed-off-by: Sven Ginka <sven.ginka@gmail.com>
Updates the TI hal modules to include the following fixes in Zephyr's
ClockP API implementation:
* The unused stubs.h header was removed.
* The ClockP implementation contained some cruft due to an incomplete
migration from the ms based to the tick based kernel timer API.
* The ClockP implementation assumed timeouts and periods to be given in
ms although TI's API always expected ticks.
* A fix for a major conversion bug in TI's own usage of the ClockP API
throughout the SimpleLink framework is included.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add a network configuration option to configure whether IEEE 802.15.4
packets are expected to be ACKed or not.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
In the IEEE 802.15.4 area certain settings must be set before
net_if_up() may be called (e.g. the channel).
Also net_if_up() may not be called if
CONFIG_IEEE802154_NET_IF_NO_AUTO_START=y.
This fixes the set-up order and handling of
CONFIG_IEEE802154_NET_IF_NO_AUTO_START.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The prep_c.c source doesn't depend on the ACPI library. As ACPI support
now requires the ACPICA module, the extra header breaks projects using
x86 without ACPI support.
Signed-off-by: Keith Short <keithshort@google.com>
There aren't any 'required' or 'recommended' changes when switching from
the minimal C library to picolibc, but there are a bunch of things which
application developers might need to be aware of. Add a separate section to
list those.
Signed-off-by: Keith Packard <keithp@keithp.com>
Use the HAL event clear functions to clear EVENTS
instead of accessing the registers directly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the HAL event clear function to clear the RTC EVENT
instead of accessing the register directly.
This allows using an updated version of the RTC HW models
which generate level interrupts (as the real HW) and in
which if the EVEN register is not properly cleared,
the interrupts are kept high, resulting in the interrupt
handler reentering immediately after exiting.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The command was missing a metalen check, and attempted
to access array of size 0, which could give a build
warning.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds testing of composition data page 2 and 130 in the
mesh_prov_pst_pb_remote_ncrp bsim test.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds support for composition data page 2 & 130.
In this implementation the responsibillity for filling the page 2
buffer is left to the application through the new comp page 2 cb API.
Only the application can know/decide if the device is NLC compliant,
and must thus be given the responsibillity for cheking the NLC profile
requirements, defined in the NLC specs, and filling the response buffer
for comp data page 2.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
