Due to in-tree dependencies on Kconfig options defined in modules we end
up having warnings and errors when those modules are not part of the
manifest.
Users should be able to remove unwanted modules from their downstream
manifest and still build any board configurations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a graphical configuration interface written in Tkinter. Like
menuconfig.py, it supports showing all symbols (with invisible symbols
in red) and jumping directly to symbols. Symbol values can also be
changed directly from the jump-to dialog.
This interface should feel a lot smoother than menuconfig.py on Windows.
When single-menu mode is enabled, a single menu is shown at a time, like
in the terminal menuconfig. Only this mode distinguishes between symbols
defined with 'config' and symbols defined with 'menuconfig'.
Compatible with both Python 2 and Python 3. Has been tested on X11,
Windows, and macOS.
To avoid having to carry around a bunch of GIFs, the image data is
embedded in guiconfig.py. To use separate GIF files instead, change
_USE_EMBEDDED_IMAGES to False. The image files can be found in
https://github.com/ulfalizer/Kconfiglib/tree/screenshots/guiconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
MHU (Message Handling Unit) enables software to raise interrupts to
the processor cores. It is enabled in SSE 200 subsystems.
This patch aims to implement inter processor communication.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add LiteX with softcore CPU VexRiscV SoC definitions and default
configurations.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add LiteX interrupt controller driver and bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add LiteX timer driver with bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add LiteX UART driver with bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add a minimal sample that showcases minimal ROM sizes. It can be built
in several configurations, all very restrictive when it comes to
features enabled in order to verify the fact that we can fit in small
devices and to be able to accurately measure the sizes of the kernel's
basic features.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add bindings for SiFive Data Tightly-Integrated Memory.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Commas are not allowed in this file and prevent parsing by github
Error introduced in
7c7db00a77Fixes#15998
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This commit adds driver support for ADC1 on all 8 supported series of
stm32 with resolution and conversion time selection and calibration.
Currently DMA is not supported for all series, and without it, zephyr
won't be able to catch up ADC's end of conversion interrupt, so this
version of the driver supports one channel conversion only. Users want
multi-channel conversion should use multiple sequences in their app
code.
This driver uses LL lib rather than HAL because the current HAL lib for
ADC will call HAL_DMA_* functions rather than using zephyr's common DMA
interface, so that way the driver will break the consistency of the
code.
This driver has been tested on multiple nucleo boards including
NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG and all
passed the test cases in tests/drivers/adc/adc_api. If the external ADC
line is floating, it may fail the tests since ADC may get 0V and the
test cases think 0 is failing. Connect it to any voltage source between
0-3.3V will help passing the test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Add a sample application for showcasing the functionality of the
Holtek HT16K33 LED driver with keyscan functionality.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The HT16K33 is a memory mapping, multifunction LED controller
driver. The controller supports up to 128 LEDs (up to 16 rows and 8
commons) and matrix key scan circuit of up to 13x3 keys.
This commit adds support for the keyscan functionality of the HT16K33.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Szymon is no longer actively looking at Bluetooth code, whereas Joakim
from Nordic has been assigned for Bluetooth host support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
I'm the de-facto maintainer of all things Apollo Lake these days,
and the Apollo Lake begins with the up_squared.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Initial support for Microchip MEC1501 series is added to the tree.
Additional support for UART is also included. This SoC supports
two operational modes for interrupts (Direct and Aggregated). For
this commit, the direct capable interrupts are configured in
direct mode.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add support for blue pill and black pill variants of the STM32
minimum development board by splitting board configuration into
stm32_min_dev_blue and stm32_min_dev_black.
CODEOWNERS: Add myself (@cbsiddharth) as codeowner for stm32_min_dev
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
This commit adds a tests for flash simulator driver implementation
for qemu_x86 boards.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This commit adds a flash driver implementation that writes to RAM and
exports statistics through stats.h. It can be used to simulate flash
memory for testing purposes.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
