This test was working by accident onarm64 and riscv64. Those
architectures have large register files, even more so considering
their 64-bit nature.
This test works by calling k_object_alloc(K_OBJ_THREAD) until thread
index exhaustion. However here it exhausted heap memory before running
out of thread indexes. There was a test to make sure that wasn't the
case by attempting a k_malloc(256). But here that succeeded just
because 256 is far smaller than a struct k_thread on the above
architectures.
Fix this by:
- attempting an additional allocation with the actual object size
instead of an arbitrary 256 bites
- increasing the heap size as 8192 was clearly insufficient for the
above platforms.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Git describe should work in eg. shallow clones when there are no tags.
Has been fixed in cmake previously, but not in twister.
Signed-off-by: Andreas Pettersson <andreaspettersson95@gmail.com>
When running twister with --only-failed option, based on last xml
result, the new skipped count should be the last skipped count
plus current skipped count.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Execute log_setup even when test is skipped. This is especially
vital when test infrastructure is using logging (e.g. LOG_PRINT
is enabled).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removing backend config from board Kconfig.defconfig and moving
it to xtensa_sim backend configuration in logging. Without this
change define persisted even when logging was not using backends
and that impacted what is compiled in.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removing backend config from board Kconfig.defconfig and moving
it to native_posix backend configuration in logging. Without this
change define persisted even when logging was not using backends
and that impacted what is compiled in.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended logging v2 to support frontend api. Contrary to v1,
it is possible to have frontend and backends in the system.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some configurations does not support VLA (e.g. CONFIG_MISRA_SANE).
Replace with a trick were fixed size array is used.
Note that this code is resolved at compile time so code size and
stack usage should be the same.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Refactors the remaining I2S drivers to use the shared driver class
initialization priority configuration, CONFIG_I2S_INIT_PRIORITY, to
allow configuring I2S drivers separately from other devices. This is
similar to other driver classes.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to be
consistent with other driver classes.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fix register bit field when clock source is MSI
on the stm32L0x or stm32L1x mcus
Use RCC_CR_MSIRGSEL bit field instead of not soc stm32wbx serie
That bit of the RCC CR is common to several stm32 mcus
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Rename
BT_CTLR_LLCP_PROC_CTX_BUF_NUM
to
BT_CTLR_LLCP_LOCAL_PROC_CTX_BUF_NUM
to match naming scheme of
BT_CTLR_LLCP_REMOTE_PROC_CTX_BUF_NUM
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add a separate procedure context pool for remote initiated procedures.
Make it configurable in size by BT_CTLR_LLCP_REMOTE_PROC_CTX_BUF_NUM.
Fix all unit tests referring to the amount of free context buffers.
Fixes#41823
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Move the mem_pool structure to the internal header for wider access.
Introduce a mem_pool owner in the proc_ctx, sch that multiple mem_pool
could be used for memory management of proc_ctx, also static 'foreign'
allocated proc_ctx would be supported by this.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When padding is added to "fill" the gap in order to wrap to the
beginning of the ring buffer, such padding is attributed to the
current item being added. Let's attribute it to the previous entry
instead so it'll be freed along with that entry and make the space
available one entry sooner, increasing the chances for keeping the
current entry around longer.
If ring buffer is empty then always reset it up front to get best
alignment right away i.e. beginning of buffer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The `handle_signal()` function in the new ztest API (`ztest_new.c`) uses
an array of strings to lookup a friendly name for each test phase, but
the array only has three elements despite there being six test phases.
This can lead to an out-of-bounds issue. Replace the array with a helper
function and switch statement.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
After experiencing a few deadlocks, it was discovered that this bus does
not implement any form of mutual exclusion... this patch addresses this
and resolves potential deadlocks.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Start of the antenna switching and sampling CTE is configured by use
of DFECTRL2 register in Nodric Radio peripheral. As of now the
configuration was set to defaults, so antenna switching has started
immediately after CTE procedure was started (end of CRC).
Sampling was started at the very beginning of a sampling slot.
It should be delayed for at least 125 ns from beginning of sampling
slot and not more than 125 ns to the end of sampling slot. This is a
requirement from BT 5.3 Core specification Vol 6, Part B section 2.5.4
IQ sampling.
Although it seems to me that when samples are taken depends on
implementation and used hardware. Taking that into account
there is provided a set of KConfig options to configure samples
offset for PHY 1M, PHY 2M and sapling slots 1 us and 2us separetely.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
If there is enabled support for ADI in periodic advertising and
periodic advertising uses chained PDUs there is an assert when
periodic advertising is re-enabled.
There is missing a code that will set a chain for PDU with
updated ADI field.
The commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Convert the CAN timing test to the new ztest framework. Restructure the
tests a bit to improve code readability and add doxygen documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Don't set AFIOEN when enabling IO port clock.
The bit is set upon requirement within pinctrl
or pinmux
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
SenML Json support dynamical basename for composite operation.
Changes simplify base name generation and compres message better.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Move the file from board to soc to make it could be shared by
i.MX8M family. When MCUX_HAL supported in future, this file could
be dropped.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
We could reuse the common linker script, no need use i.MX8M specific
one. BTW i.MX8M family is based on A53 core.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Use NRF_DT_GPIOS_TO_PSEL() in calls to nRF GPIO HAL functions as they
need a psel value, a pin number combined with the corresponding GPIO
port number, not only the pin number as provided by DT_GPIO_PIN().
This way buttons connected to pins in the P1 port can also be handled
properly.
Replace also DT_NODELABEL(button0) with DT_ALIAS(sw0) for consistency
with other samples that use the standard button.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Refactors interrupt controller drivers to use the shared driver class
initialization priority configuration, CONFIG_INTC_INIT_PRIORITY, to
allow configuring interrupt controller drivers separately from other
devices. This is similar to other driver classes.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEFAULT to preserve
the existing default initialization priority for most drivers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Aligned tests to handle the fact that static packaging return
error when detects read-write string and storing read-write
positions is not enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added information about package variants and updated package
structure table.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added new flags to packaging API:
- CBPRINTF_PACKAGE_ADD_RO_STR_IDXS - when set, read-only string
locations are appended to the package
- CBPRINTF_PACKAGE_ADD_RW_STR_IDXS - when set, read-write string
locations are appended to the package (instead of appending actual
strings)
- CBPRINTF_PACKAGE_FIRST_RO_STR_CNT(n) - indicate that n first strings
are known to be read only. Ignored in runtime packaging.
Add function for copying packages with optional appending strings.
Changed CBPRINTF_MUST_RUNTIME_PACKAGE to use same flags as packaging.
Aligned logging and test to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Refactors the remaining I2C drivers to use the shared driver class
initialization priority configuration, CONFIG_I2C_INIT_PRIORITY, to
allow configuring I2C drivers separately from other devices. This is
similar to other driver classes.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Deprecate the macro in favor of DT_LABEL(DT_CHOSEN(zephyr_entropy)), and
promote usage of DEVICE_DT_GET(), where labels are not required.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use DEVICE_DT_GET to obtain a reference to the chosen entropy device.
The device is now global, and readiness is checked at the test setup
fixture.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The entropy device reference can be obtained at compile time. Adjust
error code to -ENODEV.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
THe entropy device can be ontained at compile time. Simplify some
logs/code as a result. Also adjusted "entropy_driver" name to
"entropy_dev", since it holds a "device", not a "driver".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The entropy device can be obtained at compile time. Adjusted the
assertion message slightly, as it no longer uses the entropy macro
label. Also adjusted the entropy_driver variable to entropy_dev, since
it does not hold a "driver" but a "device".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device can be obtained at compile time. Note that now the readiness
is checked on every call, but it's a fast operation anyway.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
