Moves DAC dts node and driver configuration defaults from the
application level to the board level for the bl653_dvk board.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Moves DAC dts node and driver configuration defaults from the
application level to the board level for the bl652_dvk board.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fix incorrect Periodic Advertising interval when Coded PHY
support is built, chain PDUs is used and Extended
Advertising is disable while the Periodic Advertising
continues to be active.
Related to commit a379196b48 ("Bluetooth: controller:
nRF5: Back-to-Back Radio Tx interface").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix configuration options for TF-M log levels configured to an empty
string when not defined. This can happen when none of the options
have been selected due to dependencies not being met.
For example when TFM_MINIMAL=y then TFM_PARTITION_LOG_LEVEL will not be
defined.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds another test configuration to ensure we build sensor drivers with
device power management enabled, in addition to the existing test that
builds sensor drivers with device power management disabled.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The vcs_link should only run for the HTML builder, since it is the only
target of this extension. The other builders do not have the templates
instance, making them fail.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In function smf_execute_ancestor_exit_actions, variables
"tmp_state" and "target_parent" are set but not used.
Twister passed:
twister -T tests/lib/smf/
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Mention TRNG support in the NEORV32 board documentation, but leave it
disabled by default.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
There is not need to handle all power states in switch state after
remove lower power and off states for devices.
Also, it incorporates the fix done in pull/38873.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
As discussed in issues/38619, this commit aims to simplify device
power management. It was removed PM_DEVICE_SATE_LOW_POWER.
The power subsystem now doesn't need to figure out which device state to
use of a given system power state. It just suspend and resume devices.
Devices now just need to respond to ACTIVE and SUSPEND and OFF actions
and they are free to use any particular substate they have when the
subsystem asks to suspend. They also don't need to worry about states
transitions (unless they have multiple substates) because the system
will just request them to suspend if they are active and vice-versa.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
rebase
Add a function that can be used by device drivers to know
what will be next power state used by the SoC.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added check to respect the TRACING_SYSCALL tracing option
when generating syscall tracing overrides in
gen_syscalls.py.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Enable the vcs_link extension so that pages contain "Open on Github"
link at the top.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add vcs_link extension. The extension can be used to obtain VCS (Git)
URLs for given Sphinx documents.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Use designated CSS parts to style the toggle properly
- Use breadcrumbs_aside block to render dark mode toggle
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds functionality to receive LoRa packets asynchronously. Reception
runs continuously until cancelled by another call to `lora_recv_async`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The OpenThread stack uses uint32_t to calculate expiry time for
alarms, while comparing to zephyr's uint64_t uptime.
This commit fixes broken milliseconds alarms after ~49.7 days of
uptime.
Fixes#39704
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
MEC172x eSPI driver, eSPI pin programming, interrupt updates related
to eSPI and other updates for MEC172x eSPI driver.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Add RSSI member into gsm_ppp_modem_info structure in order to
get that information using the gsm_ppp_modem_info function.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Make modem_info structure public in order to allow the user
to get modem information using gsm_ppp_modem_info function.
Move modem info query commands into separate function
that's called only once during gsm configuring because
there is no necessity to re-querying modem since
they should not change.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
THis patch fixes multiple issues when referencing to the C domain. In
some cases there were typos (e.g. missing :), in some others no domain
syntax was used for referencing, etc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After recent changes in the driver, the predefined `data` pointer in
`uarte_nrfx_pm_control()` would not be used in CONFIG_UART_ASYNC_API
configuration. Fix this by replacing `get_dev_data()` calls with
predefined data pointer where applicable.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Core Specification 5.3 Vol 3. Part G. 4.2:
The Signed Write Without Response sub-procedure shall only be supported
on the LE Fixed Channel Unenhanced ATT bearer.
This was affecting GATT/SR/GAW/BI-38-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Some shell prints didn't use the correct format for some
values, causing warnings/build errors.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Pick those common node in 'fvp-baser-aemv8r.dts' to 'fvp-aemv8r.dtsi'
which reside in 'dts/arm64/fvp-aemv8r' directory.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Some architectures (e.g. RISC-V) has .sdata/.sbss section for small
data/bss. Memory partition should also manage the permission of these
sections in library so they should be put into app_smem.
(For example, newlib _impure_ptr is in .sdata section and
__malloc_top_pad is in .sbss section in RISC-V.)
Signed-off-by: Jim Shu <cwshu@andestech.com>
On the stm32H7 family, there are ADC which have Oversampling ratio
of 10 bits OSVR[9:0] in the CFGR2 register. It means that oversampling
512x or 1024x are possible.
Other values are not allowed as the oversampling field of the struct
adc_sequence (adc.h) is 2^oversampling.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The adc_stm32_oversampling function is used to configure
the ratio and shift for each sequence->oversampling
depending on the soc serie and ADC instance in the serie
In the stm32H7 serie, only ADC3 of ADC_VER_V5_V90 version
have a LL_ADC_OVS_RATIO_x contant (other a 9bit value).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Change the access to the PCSEL register by using the LL function
because on the STM32H7xx soc, some devices have no PCEL register
especially on ADC3 of the stm32H723.
The LL function manages this difference.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a user guide that provides general concepts on pin control, details
on Zephyr model, implementation guidelines, etc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable figures enumeration. This option allows to use :numref: in order
to reference figures, thus allowing more precise references other than
"the figure below" or similar.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
