This was only enabled by the MVIC, which in turn was only used
by the Quark D2000, which has been removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We introduce a new define to describe the alignment for a
privilege stack buffer. This macro definition is used by the
privilege stack generation script, to determine the required
alignment of threads' privilege stacks when building with
support for user mode.
We cannot use Z_THREAD_MIN_STACK_ALIGN in this case, because
the privilege stacks do not need to respect the minimum MPU
region alignment requirement, unless, of course, this is
enforced via the MPU Stack Guard feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-organizes the macro definitions in arch.h for
the ARM architecture. In particular, the commit:
- defines the minimum alignment requirement for thread stacks,
that is, excluding alignment requirement for (possible)
MPU stack guards.
- defines convenience macros for the MPU stack guard align and
size for threads using the FP services under Shared registers
mode (CONFIG_FP_SHARING=y). For that, a hidden Kconfig option
is defined in arch/arm/core/cortex_m/mpu/Kconfig.
- enforces stack alignment with a wide MPU stack guard (128
bytes) under CONFIG_FP_SHARING=y for the ARMv7-M architecture,
which requires start address alignment with power-of-two and
region size.
The commit does not change the amount of stack that is reserved
with K_THREAD_STACK_DEFINE; it only determines the stack buffer
alignment as explained above.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These constants do not need global exposure, as they're only
referenced in the reboot API implementation. Also their names
are trimmed to fit into the X86-arch-specific namespace.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The only we support cores that don't have CMOV insns are the MINUTEIAs,
so we simply check for that rather this using a layer of indirection.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit adds the architecture-specific implementation
of k_float_disable() for ARM and x86.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When CONFIG_X2APIC is enabled, twiddle the appropriate MSR during
initialization to enable x2APIC mode.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
MSRs related to x2APIC will never be accessed directly by name, but
rather via an offset from a base MSR, so the definitions are removed
from msr.h.
New local APIC accessor functions, which are sensitive to xAPIC vs
x2APIC mode (CONFIG_X2APIC), are added to include/drivers/loapic.h.
These accessors use the MSR definitions as modified above.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The real-mode startup code is trivially changed to refer to MSR
definitions in include/arch/x86/msr.h, rather than its ad-hoc ones.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Light reorganization. All MSR definitions and manipulation functions
are consolidated into one header. The names are changed to use an
X86_* prefix instead of IA32_* which is misleading/incorrect.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A basic display driver is added for a generic 32-bpp framebuffer.
Glue logic is added to the x86 arch to request the intitialization
of a linear framebuffer by the Multiboot loader (GRUB) and connect
it to this generic driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
When booting using GRUB, some useful information about the environment
is given to us via a boot information structure. We've not made any
use of this information so far, but the x86 framebuffer driver will.
A skeletal definition of the structure is given, and provisions are
made to preserve its contents at boot if the configuration requires it.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
All architectures declare those variables the same way, no need to
define them per arch, instead put them in common. If someone deviates,
they can create their own header.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We had architectures doing this differently, some had a dedicated
sys_io.h file, some not. Unify how it is done by splitting the arch
specific sys_io implementation into a sys_io file and include it
instead.
Move bits_portable.h to arch/common and split the file so more
architecture can reuse some of the definitions here instead of
duplicating code.
Where applicable use the common sys_io/ffs definitions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's useful to be able to inspect the key returned from
z_arch_irq_unlock() to see if interrupts were enabled at the point
where z_arch_irq_lock() was called. Architectures tend to represent
this is a simple way that doesn't require platform assembly to
inspect.
Adds a simple test to kernel/common that validates this predicate with
a nested lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We do have a multi-architecture latency benchmark now, this one was x86
only, was never used or compiled in and is out-dated.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
STM32WB HCI driver requires definition of 2 RAM regions to support
use of 3 shared memory sections: MAPPING_TABLE, MB_MEM1 and MB_MEM2.
In linker.ld, under conditions of HCI driver to be enabled,
define SRAM1 and SRAM2 based on input defined in stm32wb linker.
Then define the 3 sections MAPPING_TABLE, MB_MEM1 and MB_MEM
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
arm_core_mpu_dev.h is an internal API, and is not supposed to
be directly called by kernel / application functions, therefore,
we can move it inside arch/arm/core/cortex_m/mpu directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add ifdefs to handle the nrf91 case. This change will dynamically
place and size the NSC region according to nrf91 HW limitations.
Add Cmake check of NSC offset if manually set.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Non-XIP system with FLASH_SIZE = 0 is no-flash system. And no-flash
system makes text, rodata, and data all in SRAM, so define the marco
ROM_ADDR to RAM_ADDR.
Fixes: #16027.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
on non-XIP system, SRAM is the default region, and relocated .data
section and .bss section of SRAM shouldn't be inserted between
_image_rom_start and _image_rom_end, because the memory region between
_image_rom_start and _image_rom_end will construct the mpu ro region.
Also for the newly added memory region on non-XIP system, the
relocated .text secition and .rodata section should also be mpu aligned.
Fixes: #16090.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Allows snippets to be placed in different locations:
- The noinit, rwdata and rodata output sections
- Two different locations for placing custom output sections,
one location for RAM and another for all other sections.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The compiler was generating errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef] when -Wundef is used and the config option was turned
off. Change check to ifdef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Delete memory-related configs from defconfig and use device tree based
macros in general riscv32 linker script instead of Kconfig ones.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
The ARM Cortex-M Exception Stack Frame (ESF) may consist of
several stack frame contexts (basic state context, additional
state context, FP context, etc.). To reflect these structural
properties, this commit re-factors the ESF, splitting out the
basic stack frame, holding the state context, into its own
struct container. The commit does not introduce behavioral
changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under Unshared FP register mode we are not stacking the
FP context in exception entries, so we do not need to
include the FP registers bank in the exception stack
frame structure.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The size of the ROM region is now rounded up to the
nearest power of two; we no longer assume that RAM
is in a different part of memory.
Fixes: #15558
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Right now only numerical values are printed which must
be looked up in the Designware ARCv2 ISA Programmer's
Reference, which is not public.
Add a non-default Kconfig to print more information at
the expense of footprint, and enable it for all the simulator
targets.
We only print code/parameter details for machine check and
protection violations, more may be added later as desired.
This should cover all the exceptions we commonly encounter
for memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* fix the stack allocation and initialization
for mpu stack guard when USERSPACE is not configured
* fixes#15163
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Unlike the others, this macro was not taking into
account minimum MPU region sizes by filtering through
STACK_SIZE_ALIGN().
Fixes: #15130
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
