This is really just to facilitate CPU bootstrap code between
the BSP and the APs, moving the clear operation out of the way.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The linker script was missing symbols that defined the boundaries
of kernel memory segments (_image_rom_end, etc.). These are added
so that core/memmap.c can properly account for those segments.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Set STACK_ALIGN and STACK_ALIGN_SIZE to 8 bytes instead of 4 bytes in
case a 64-bit posix board is used.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
This patch is a preparatory step in enabling the MMU in
long mode; no steps are taken to implement long mode support.
We introduce struct x86_page_tables, which represents the
top-level data structure for page tables:
- For 32-bit, this will contain a four-entry page directory
pointer table (PDPT)
- For 64-bit, this will (eventually) contain a page map level 4
table (PML4)
In either case, this pointer value is what gets programmed into
CR3 to activate a set of page tables. There are extra bits in
CR3 to set for long mode, we'll get around to that later.
This abstraction will allow us to use the same APIs that work
with page tables in either mode, rather than hard-coding that
the top level data structure is a PDPT.
z_x86_mmu_validate() has been re-written to make it easier to
add another level of paging for long mode, to support 2MB
PDPT entries, and correctly validate regions which span PDPTE
entries.
Some MMU-related APIs moved out of 32-bit x86's arch.h into
mmustructs.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix the following warning from gcc-9.2:
x86/ia32/syscall.h: In function 'test_kinit_preempt_thread':
x86/ia32/syscall.h:43:2: error: listing the stack pointer register
'esp' in a clobber list is deprecated [-Werror=deprecated]
43 | __asm__ volatile("push %%ebp\n\t"
| ^~~~~~~
x86/ia32/syscall.h:43:2: note: the value of the stack pointer after
an 'asm' statement must be the same as it was before the statement
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ACPI is predominantly x86, and only currently implemented on x86,
but it is employed on other architectures, so rename accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simple naming change, since MULTIBOOT is clear enough by itself and
"namespacing" it to X86 is unnecessary and/or inappropriate.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
x86 has more complex memory maps than most Zephyr targets. A mechanism
is introduced here to manage such a map, and some methods are provided
to populate it (e.g., Multiboot).
The x86_info tool is extended to display memory map data.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This sample demonstrates basic use of the x86 multiboot and ACPI
systems, and also provides some useful information about the board
it's booted on: data handed over by the multiboot loader (which is
either QEMU or GRUB at this point), basic APIC CPU topology, and
timer driver frequency (computed empirically).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Originally, the multiboot info struct was copied in the early assembly
language code. This code is moved to a C function in multiboot.c for
two reasons:
1. It's about to get more complicated, as we want the ability to use
a multiboot-provided memory map if available, and
2. this will faciliate its sharing between 32- and 64-bit subarches.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Implement a simple ACPI parser with enough functionality to
enumerate CPU cores and determine their local APIC IDs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Refactor z_arch_is_user_context() for ARM, so it uses
the CMSIS CONTROL_nPRIV_Msk instead of hard-coded 0x1.
Fixing also some typos in include/arch/arm/syscall.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Declare the 64-bit TSS as a struct, and define the instance in C.
Add a data segment selector that overlaps the TSS and keep that
loaded in GS so we can access the TSS via a segment-override prefix.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is largely a conceptual change rather than an actual change.
Instead of using an array of interrupt stacks (one for each IRQ
nesting level), we use one interrupt stack and subdivide it. The
effect is the same, but this is more in line with the Zephyr model
of one ISR stack per CPU (as reflected in init.c).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
when enable CONFIG_CUSTOM_SECTION_ALIGN, it need less alignment
memory for image rom region. But that needs carefully configure
MPU region and sub-regions(ARMv7-M) to cover this feature.
Fixes: #17337.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Include .gcc_except_table (sub-)sections in linker files to support C++
with exceptions enabled. If these sections are not mapped warnings will
be generated for orphaned sections at link time.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
x86_64 doesn't use devicetree, so put some hand-coded definitions
into arch.h to allow it to use the DT-enabled HPET driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Not sure why these were formatted the way they were, but I've removed
unnecessary line breaks, embedded control characters (actual embedded
tabs, not escape sequences) and escape sequences.
No functional change.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These inline-assembly functions are identical between IA32 and
Intel64 arches, so move them to the common arch.h file.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This function, like its cousin z_tsc_read(), can be shared between
subarches. Note: it's unclear to me if we actually need these to be
two separate functions (do we need serialization?) or if they can
be combined into one function. Add that to the to-do list.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The previous linker script was barebones and non-standard. It is
replaced with a script conforms to the rest of the Zephyr arches,
utilizing include/linker headers and standard macros.
link-tool-gcc.h is updated to account for the "i386:x86-64" arch and
the generation of 64-bit ELF binaries.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Fleshed out z_arch_esf_t and added code to build this frame when
exceptions occur. Created a separate small stack for exceptions and
shifted the initialization code to use this instead of the IRQ stack.
Moved IRQ stack(s) to irq.c.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
First "complete" version of Intel64 support for x86. Compilation of
apps for supported boards (read: up_squared) with CONFIG_X86_LONGMODE=y
is now working. Booting, device drivers, interrupts, scheduling, etc.
appear to be functioning properly. Beware that this is ALHPA quality,
not ready for production use, but the port has advanced far enough that
it's time to start working through the test suite and samples, fleshing
out any missing features, and squashing bugs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simplified these two inline functions somewhat, and refactored them:
unlocking can be shared between subarches, but locking cannot.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The sys_inXX() and sys_read/writeXX() I/O primitives can be shared
between subarches of x86 with minor modifications, so move them.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This patch adds basic build infrastructure, definitions, a linker
script, etc. to use the Zephyr and 0.10.1 SDK to build a 64-bit
ELF binary suitable for use with GRUB to minimally bootstrap an
Apollo Lake (e.g., UpSquared) board. The resulting binary can hardly
be called a Zephyr kernel as it is lacking most of the glue logic,
but it is a starting point to flesh those out in the x86 tree.
The "kernel" builds with a few harmless warnings, both with GCC from
the Zephyr SDK and with ICC (which is currently being worked on in
a separate branch). These warnings are either related to pointer size
differences (since this is an LP64 build) and/or dummy functions
that will be replaced with working versions shortly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some of the elements of arch.h can be shared between subarches,
so put them in a common file and factor out the rest. Placeholder
left for the Intel64 definitions to be added later.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Kinetis SoCs have a 16-byte flash configuration field that must be
loaded at a specific address in flash. This field is not needed if we
are building an image to be chainloaded by MCUboot or a RAM-only image,
so we can exlude it in these cases and recover some wasted flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This appears to be leftover from the days when we generated
more memory protection data at build time.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Utilize the multi-level irq infrastructure and replace custom handling
for PLIC on riscv-privilege SoCs. The old code offset IRQs in drivers
and various places with RISCV_MAX_GENERIC_IRQ. Instead utilize Zephyr's
encoded IRQ and replace offsets in drivers with the IRQ define from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The CC3235SF requires a debug header to be placed at the beginning of
internal flash, so that the bootloader does not automatically overwrite
the flash memory with the program saved in external flash.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This follows the z_arch_irq_en-/dis-able() so that the SoC
definitions are responsible for functions related to multi-level
interrupts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CONFIG_NUM_IRQS blindly assumes CONFIG_2ND_LEVEL_INTERRUPTS
and CONFIG_3RD_LEVEL_INTERRUPTS are always enabled together,
which is not always the case. So fix the #define.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update the xtensa backend to work better with the new fatal error
architecture. Move the stack frame dump (xtensa uses a variable-size
frame becuase we don't spill unused register windows, so it doesn't
strictly have an ESF struct) into z_xtensa_fatal_error(). Unify the
older exception logging with the newer one (they'd been sort of glomed
together in the recent rework), mostly using the asm2 code but with
the exception cause stringification and the PS register field
extraction from the older one.
Note that one shortcoming is that the way the dispatch code works, we
don't have access to the spilled frame from within the spurious error
handler, so this can't log the interrupted CPU state. This isn't
fixable easily without adding overhead to every interrupt entry, so it
needs to stay the way it is for now. Longer term we could exract the
caller frame from the window state and figure it out with some
elaborate assembly, I guess.
Fixes#18140
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
In arch/arc/arch.h the extern "C" in the including context is left
active during an include to avoid more complex restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
