Adds a comment stating the state of the peripheral SDU size
and why it is being assigned the PDU size on CIS established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This patch adds support for PWM blink which is found in intel's
PCH hardwares.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Now that input dump functionalities are at subsystem level, drop the
custom code from the sample, just enable CONFIG_INPUT_EVENT_DUMP.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add two input subsystem options: one for dumping input events, one for
triggering input reports from the shell.
The two are independent from each other, so dumping can be enabled on
any application that has no shell, but if the shell command is present
logging can be toggled on and off with a shell command.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Changes the Kconfig option to allow disabling mutex support, this
is to allow other Kconfig options to disable the feature.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Changes the Kconfig option to allow disabling mutex support, this
is to allow other Kconfig options to disable the feature.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The bt_ots_init struct has been renamed to bt_ots_init_param in commit:
cf0ff30b53
That was previously triggering a warning in Sphinx, due to the same
name being used for a struct and function, and this pattern
was designed to silence it. We don't need the pattern any more as the
warning is gone.
Signed-off-by: Michael Jones <m.pricejones@gmail.com>
Change the default mbox initialization priority so that it initializes
before ipc, as some ipc drivers depends on it.
Found with:
$ west build -p -b nrf5340dk_nrf5340_cpuapp \
samples/subsys/ipc/ipc_service/icmsg_me \
-DCONFIG_CHECK_INIT_PRIORITIES=y
...
ERROR: /ipc/ipc1 POST_KERNEL 46 <
/soc/peripheral@50000000/mbox@2a000 POST_KERNEL 50
ERROR: /ipc/ipc0 POST_KERNEL 46 <
/soc/peripheral@50000000/mbox@2a000 POST_KERNEL 50
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The underlying HAL driver may improperly forward an samplerdy event even
if it's disabled in the configuration. Ignore the event to prevent error
logs until the issue is fixed in HAL.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
remove the sdk based TOTAL_DMA_CHANNELS macro and instead just use the
zephyr driver's num_of_channels field
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Current erroneous usages of dma-channels prop by lpc-dma nodes:
* dma-channels devicetree property should describe the number of
channels supported by the dma controller, not the number of channels
in use.
* LPC55SXX and RTXXX SOCs should be setting dma channels prop at SOC
level, not board level, since it is an SOC property, not a board
property.
* lpc55s28 has 23 channels for dma0, not 20.
* lpc55s28 has 10 channels for dma1, not 0.
* lpc55s69 has 23 channels for dma0, not 20.
* rt5xx has 37 channels for dma1, not 0.
* rt6xx has 33 channels for dma0, not 20.
* rt6xx has 33 channels for dma1, not 0.
Fix all of these issues
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Set the DMA number of otrigs DT property at the SOC level instead of the
board DTS because it is an SOC property and does not change on different
boards.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add a user possibility to set a callback for receiving a new function.
It allows instant performing some actions, that need to be done before
context switch.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Verify validity of a received command before passing it to the general
handler.
It allows performing some actions, right after receiving the command.
The context switch is not needed. Such feature may be needed for
overloaded system, where instant reboot is required.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add a function to signal a new host command by a backend.
Use a function instead of giving semaphore, because it allows more
actions on rx event, common for all backends.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add a config to save the final result of a last host command that has
sent EC_HOST_CMD_IN_PROGRESS response. To get the final result use the
ec_host_cmd_send_in_progress_status function.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add Arduino compatible LoRaWAN shield based on SX1276 tranceiver from
Semtech. Provide minimal documentation on how to use it.
Tested with `nucleo_l073rz` platform.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
When reading multiple ADC channel in parallel, an ADC command chain will be
build. This is similar to a linked list, as every command references the
next command.
Before this patch every ADC command after the first, would always reference
this initial command. So that during execution only two commands (the last
and first) would be executed which resulted in readout of only two analog
values. As Zephyr expected more to come in, the `read_adc` function would
block endlessly.
The patch fixes the behaviour and allows a correct chain to build up.
Signed-off-by: Elisabeth Friedrich <auxsys@flowerpot.me>
PCIe devices refer to interrupt nodes, but are initialized with the same
priority, making the sequence depending on the linking order. Add a new
symbol and set it to one unit after intc to ensure that the
initialization sequence is stable.
Found with:
west build -p -b qemu_cortex_a53 \
samples/drivers/virtualization/ivshmem/doorbell \
-DCONFIG_CHECK_INIT_PRIORITIES=y
...
ERROR: /soc/pcie@4010000000 PRE_KERNEL_1 40 <
/soc/interrupt-controller@8000000/its@8080000 POST_KERNEL 40
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The intc_gicv3_its driver is currently initializing in POST_KERNEL, but
PCIe device nodes depends on it and are initialized earlier. Change the
init level to PRE_KERNEL_1 to sort that out, and also put the driver in
line with other interrupt controller drivers.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Multiple reader threads unlocking the read lock simultaneously might
cause the program hang because it's possible that no thread is
identified as the last one to active the writer thread.
To fix the issue, swap the k_sem_give sequence.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
The eSPI, I2C, and SPI emulators use devicetree macros to build an array
of devices on the virtual bus. Currently, they will add device nodes that
are not status-okay. This leads to linker errors because the respective
device drivers would not have instantiated device structs for these
nodes --assuming the driver was even compiled. This can be frustrating
if nodes need to be disabled for debugging or configuration purposes.
Update the bus emulators to only consider status-okay nodes by changing
the macros used to iterate over bus devices.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Removed the unneccessary casts in the functions to remove warnings
during build for SoCs using RAT. Functionality reamins the same,
tested on board.
Signed-off-by: L Lakshmanan <l-lakshmanan@ti.com>
With NEORV32 v1.8.2 the UART module was changed to a simpler
implementation. This updates the UART driver for the open-source NEORV32
RISC-V compatible processor system (SOC).
Signed-off-by: Tim-Marek Thomas <thomas@sra.uni-hannover.de>
According spec, for the same iv index, iv update flag
should trans to false, when iv update procedure complete.
When local environment has attack-node
to store old network beacon(1,1), and re-send same
network beacon(1,1) after 192hours, will cause whole
bluetooth mesh network broke.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
OOB information should be in little endian in scan report messages.
URI hash should be retrieved as it is from unprovisioned device beacon
and encoded likewise into scan report messages like we do for UUID.
Signed-off-by: Alperen Sener <alperen.sener@nordicsemi.no>
