Version is not enough, we need the run date but also the commit date, to
ease reporting and use in dashboards.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some scenarios we might end up with a null version value in the json
file, if the version can't be determined, set it to Unkown instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a test for the new ipv4_fragment feature. This test suite
checks TCP and UDP messages are correctly fragmented and reassembled,
checks that an ICMP error is sent if not all fragments were received
and checks that packets with the do not fragment bit are not
fragmented.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Adds support for incoming and outgoing IPv4 fragmented packet support,
allowing a single packet that is too large to be sent to be split up
and sent successfully.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
This commit fixes the overlay file for running the
samples/subsys/fs/littlefs on the nucleo_h743zi platform.
The storage_partition is moved to the qspi_nor flash
instead of the internal flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Currently, the sync timeout means the device will timeout
straight after it syncs. This means we cannot send a sync
transfer as we are no longer synced.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Currently, the nrf-802154-spinel IPC service requires that the IPC
service node has a specific name (ipc0). This makes it impossible to
overwrite the IPC service node to be used by the Spinel serialization
without completely redefining the ipc0 node. Create a `chosen` property
called nordic,802154-spinel-ipc that can be reassigned with any IPC
service node.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Update ARC port status page about XY DSP support for EM (WIP)
and single-thread kernel support added.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
After writing to mapped_rw, we should also check if the backing
buffer has the correct data. Or we could have a situation where
on systems that need explicit cache controls, the newly updated
mapped_rw is cached but the backing buffer still contain old
data. Comparing the backing buffer to mapped_ro does not really
matter in this case as the content would certain match.
Also, this moves the mapping of mapped_ro earlier so that we
map both mapped_rw and mapped_ro because data manipulation.
And that we also need to verify the values of the backing and
mapped buffers.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is an assumption on test_page buffer that the MMU page
size is 4kb so that there is a 8kb buffer for read/write.
However, page size may not be 4kb on all architectures.
We need to make sure the test buffer is large enough for
the read/write test.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The sys_sem.nouser test does not enable userspace which makes
k_thread_access_grant() no-op. However, XCC would still emit
LOOP instructions for the for-loop. Since there is nothing
to do, the XCC assembler complains about it being an empty
loop and errors out. So guard the k_thread_access_grant()
calls so they are only compiled if userspace is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit updates the twister workflow to only run on the
repositories in the zephyrproject-rtos organisation because this
workflow requires a custom runner type only available within the
zephyrproject-rtos organisation.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the clang workflow to only run on the repositories
in the zephyrproject-rtos organisation because this workflow requires
a custom runner type only available within the zephyrproject-rtos
organisation.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the codecov workflow to not run on the fork
repositories because this workflow requires a custom runner type only
available within the zephyrproject-rtos organisation and there is not
much point in running this workflow on the repositories other than the
main Zephyr repository.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
C++ standard requires C++ main() to have the return type of 'int'.
This commit updates the CHRE sample to define main() as
`int main(void)` and enable `CONFIG_CPP_MAIN`, which instructs the
Zephyr kernel to call the C++ main().
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the cpp_synchronization to run on the "POSIX
architecture" boards such as `native_posix`, since the POSIX arch now
properly supports the main() defined in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the cpp_synchronization sample to enable
`CONFIG_CPP_MAIN` since it defines its main() in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit adds notes about the C++ main() function prototype in the
C++ documentation.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the `_posix_zephyr_main` declaration to use the
return type of `int` instead of `void` when `CONFIG_CPP_MAIN=y` (i.e.
C++-compliant main() support is enabled) so that Zephyr applications
defining their main() in a C++ source file can make use of the proper
main() definition of `int main(void)` as required by the C++ standard.
Note that the forward declaration of `_posix_zephyr_main` is required
if and only if the main() is defined in a C++ source file (i.e. when
`CONFIG_CPP_MAIN=y`).
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
The C++ standard requires the main() function to have the return type
of 'int' and does not allow the main() to be defined with the 'void'
return type. Moreover, GCC goes as far as to emit a hard error when the
'::main()' has the return type of `void`.
This commit introduces an option to instruct the Zephyr kernel to call
the 'int main(void)' instead of the 'void main(void)' in case a Zephyr
application defines main() in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
In the note about the relationship between the POSIX arch
and the POSIX OS abstraction, add a link.
Signed-off-by: Elvar Tresnak <Elvar.Tresnak@gmail.com>
Add support to run the test on NXP S32Z27, the wiring connection
is needed as describe in overlay file
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Add support input interrupts for GPIO pins on NXP S32Z27
SoC. The driver will convert GPIO pin to respective
interrupt line that will be processed by External
Interrupt Controller.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Add initial support for the NXP S32Z27 SIUL2 External
Interrupt Controller. Each SIUL2 node has a child node
will act as an interrupt-controller that processes external
interrupt signals.
This driver is required to manage GPIO interrupts.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Add ADC API tests for the TI CC1352R1 LaunchXL, CC2652R1 LaunchXL and
TI CC1352R SensorTag boards.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
Add ADC driver sample overlays + update features in doc + metadata for TI
CC13x2/CC26x2 based boards (cc1352r_sensortag, cc1352r1_launchxl,
cc26x2r1_launchxl).
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
New ADC driver for the TI CC13xx/CC26xx family.
ADC channel configurations are translated from Zephyr constants to
simplelink driverlib ones (e.g., sample times use a lookup table).
Async mode was also implemented & tested.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
Adds Atmel SAMC20 and SAMC21 soc. C series is based on Cortex-M0+.
C21 contains CAN interface.
The init routines are same for SAMC20 and SAMC21. They use one
clock OSC48M without configuration.
The code is inspirated from atmel_sam0/samd21.
Signed-off-by: Kamil Serwus <kserwus@gmail.com>
Some SAM0 contains revisions with separated includes for example
SAMC21 and SAMC21N.
Signed-off-by: Kamil Serwus <kserwus@gmail.com>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Enables logging testing for qemu_xtensa along with the fixes needed to
correctly run the tests.
Several tests in log_api rely on being able to calculate the size of
the message in the mpsc_pbuf to know when an overflow occurs. The
size being calculated assumed a ROUND_UP size alignment to sizeof(long
long). On xtensa this is actually 16 bytes as defined by
CBPRINTF_PACKAGE_ALIGNMENT.
Changes the size calculation for SIMPLE_MSG_LEN to account for this.
The second issue was a misaligned package that would cause reading
from the incorrect memory when going to format the package with cbpprintf.
Fixes the padding used to align the package in cbprintf.h and adds a build
assert ensuring correct alignment when building against xtensa in both
cbprintf.h and log_msg.h.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This commit updates the manifest workflow to not label the pull
requests updating the west manifest (`west.yml`) with the `west` label
because the `manifest` label alone is enough for this purpose and the
`west` label can be easily confused with the `area: West` label.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds an optional property to the nRF21540 Front-End Module
devicetree description that specifies supply voltage in mV. This
property can be used by the nRF21540 driver to compensate the value of
achieved gain for different supply voltage.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
/__w/zephyr/modules/crypto/mbedtls/library/aes.c:307:23: warning:
'RT0' defined but not used [-Wunused-const-variable=]
307 | static const uint32_t RT0[256] = { RT };
| ^~~
/__w/zephyr/modules/crypto/mbedtls/library/aes.c:200:28: warning:
'RSb' defined but not used [-Wunused-const-variable=]
200 | static const unsigned char RSb[256] =
| ^~~
[360/437] Building C object
Fixes#51025
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add the support of the stm32MP1 family for DMA peripheral.
This dma driver is similar to the stm32H7.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
