Update docs to reference CMake 3.20.0 as minimum required version.
Added Kitware APT repository to the getting started page.
Updated installation Linux download descriptions from CMake 3.15.3 to
CMake 3.21.1 as that is the version currently being installed when
using the Kitware APT repository.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
CMake >=3.20 requires file extensions explicitly added to source files.
See CMP0115:
> Starting in CMake 3.20, CMake prefers all source files to have their
> extensions explicitly listed:
This manifest update pulls in update for the lvgl module adding missing
extension.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is necessary to get some samples to link properly when moving
from device_get_binding() to DEVICE_DT_GET and friends. In particular
I ran into issues building i2c_fujitsu_fram without a real I2C device.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
1. Update soc.c file to add USB clock setup
2. Add a linker script file to move USB transfer
buffer and controller buffers to USB RAM
3. Update Kconfig's to add USB support
4. Add zephyr_udc0 nodelabel
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update soc.c file to add USB clock setup
2. Add a linker script file to move USB transfer
buffer and controller buffers to USB RAM
3. Update Kconfig's to add USB support
4. Add zephyr_udc0 nodelabel
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The USB config name has changed to USB_MCUX and the
device tree node name has changed from nxp_kinetis_usbd
to nxp_mcux_usbd
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Add support for NXP LPC USB controller
2. Do not check the return value from the
kUSB_DeviceControlRun command as not all SDK drivers
return a value
3. Use the kUSB_DeviceControlPreSetDeviceAddress
command to set device address
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Clarify the PWM pwm_pin_set_cycles() function API details.
The API aims for synchronous (glitch-free) updates of the PWM period and
pulse width, but not all PWM controllers support this.
Similarly, the API aims for independance between channels on
multi-channel PWM controllers, but not all PWM controllers support this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses reference to zephyr_udc0 and remove
board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB devicetree nodes in Zephyr have different names,
mostly derived from the designations in data sheets.
Add zephyr_udc0 (USB device controller) nodelabel to
specific USB node to allow generic USB sample to be build.
Follow up on commit b4242a8 ("boards: add USB node aliases")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This reverts commit e53371bbc0bc37d911884937199733f23c43fb21.
The "usbd0 aliases" approach has not proven to work.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update periodic advertising data update rate. The periodic advertiser
is configured with a periodic advertising interval of 2.4 seconds but
updating the data every second. This leads to many of the advertising
data values not being sent at all.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a test to check value of the IV Update
counter at the time of provisioning based on
the status of IV Update flag. Also ensures that
the counter is reset if the mesh stack state
is reset.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
When device is first provisioned with IV Update
flag is set to 0, it should wait for minimum of
96 hours before going into IV Update In Progress
state. Such limit does not apply, if device is
provisioned with IV Update flag is set to 1.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
This commit tests persistence storage for access layer:
- Model publication
- Model subscription
- Model app keys binding
- Model data
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commits fixes an issue where an existing entry in a settings file
causes settings file corruption when storing new value.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds missing API that allows to discard the Subscription
List of a vendor model.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Name length can't be longer than 8 bytes. This needs to be clarified
in the bt_mesh_model_data_store() documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Change the fail handling of setting the CIG parameters
(or when allocating the CIS) to unref the ISO conns
instead of calling cleanup on them directly.
This fixes an issue that if the CIG parameters failed,
then the iso conns would not be unref'ed and we could
not try again.
Unref'ing an iso conn will call cleanup once it hits 0
refs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A channel should only be allowed to unbind when in
the BT_ISO_BOUND state. If it is in a disconnected state,
then it the function would have meaning. If it is a connected
state, unbinding it would generate an error when removing
the CIG, which would fail silently.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable PWR clock unconditionally for L4, L5 and U5
like it is done on other stm32 series
Fixes#37781
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This is now failing an edtlib check for unknown vendor prefixes.
I can't find a reason to use a vendor prefix in application-local
bindings like this, so just remove it wherever it appears by
normalizing to test-foo-compat instead of test,foo_compat or
test,foo-compat.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Increases the default CONFIG_TEST_EXTRA_STACKSIZE for the 32-bit RISC-V
architecture. This fixes the portability.posix.fs test on the
qemu_riscv32 platform.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add unit tests for HCI commands:
- HCI_LE_Set_Connection_CTE_Receive_Parameters,
- HCI_LE_Connection_CTE_Request_Enable.
Tests validate current implementation of commands handling in HCI/ULL.
Handling of the HCI_LE_Connection_CTE_Request_Enable is not complete,
thus tests don't validate positive behavior the functions.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
