Enabled the Shared Memory Reset feature for nRF5340 Application Core
when the RPMsg backend for IPC Service is enabled.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a code for initializing shared memory to zero. This operation
normalizes the memory state so that the IPC service is no longer
prone to reading status bits from the previous reset session.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Instead of having one single WQ per backend, move to one WQ per
instance instead and add a new "zephyr,priority" property in the DT to
set the WQ priority of the instance. Fix the sample as well.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Allocating a buffer to hold the entire directory listing consumes a very
large sum of memory when a large number of OTS objects are supported.
This implementation minimizes the memory footprint of the directory
listing by only allocating the minimum necessary buffer size to allow
for efficient over the air transfer. The contents of the transferred
buffer are built incrementally and upon request.
The directory listing manipulation upon object creation and deletion can
be removed since the directory listing content is never constructed
until it is requested.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
Add the telephone bearer service server implementation.
This support multiple service instances as well as the
generic telephone bearer service, but is still a work in
progress and should be treated as such.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixup a command where dnf should be invoked with sudo.
If this command is ran without sudo, dnf will return:
`Error: This command has to be run with superuser
privileges (under the root user on most systems).`
Signed-off-by: Wilfred Mallawa <thulith.mallawa@uqconnect.edu.au>
To identify the flash partition id, the macro DT_FIXED_PARTITION_ID()
was used previously.
Now the macro FLASH_AREA_ID() is used. This also supports the usecase
when a different flash map implementation is used that redefines the
macros in include/storage/flash_map.h, e.g. the nordic partition
manager.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Add Nano header connector defined by Arduino. This allows
hardware with compatible headers to define the related GPIOs.
Signed-off-by: Marco Peter <marco.peter@joylab.ch>
Based on introduction of plain GPIO configurations in STM32 pinctrl
bindings, update STM32 pinctrl/gpio drivers to make this functionality
available.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Before updating stm32 pinctrl/gpio drivers to support plain GPIO
feature, rework pin configuration functions headers to provide
more clarity on the arguments and the information they convey:
- pin configuration
- pin function
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some pinctrl related definitions are still defined
in pinmux related files.
Duplicate definitions to prepare pinmux removal.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add description for a plain GPIO configuration using
st,stm32-pinctrl and st,stm32f1-pinctrl bindings.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The CANopenNode stack does not support CAN-FD. Depend on it being
disabled and explicitly disable it in the CANopenNode sample.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the duplicated pairing_complete, pairing_failed
and bond_deleted informational callbacks from bt_auth.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CSS classes used by figures in docutils has changed in recent
versions. Adjust CSS so that figures are centered again by default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The sphinx-copybutton extension adds a button to every code snippet
that, when clicked, copies the code to the clipboard.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Pull in the CI docker image v0.22.0, which contains the Zephyr SDK
0.14.0 release, and use the Zephyr SDK 0.14.0 for building and testing
Zephyr in the CI.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
All iMX RT 1xxx boards are now expected to use pin control, so the USDHC
pinmuxing callbacks can be removed.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable soc ethernet ref clock output at the SOC level instead of board
level, since it is required for all iMX.RT SOCs
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add backlight gpios property to mcux display driver, so that the driver
can correctly initialize the backlight gpio control.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In order for pinctrl support to be complete, RT series GPIO driver must
support pinmuxing within the driver level. RT series pinmux settings do
not correspond directly to gpio port/pin numbers, so use DTS mappings to
pinctrl nodes to select and apply pinmux settings in the gpio driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable pinctrl driver for usdhc. USDHC driver uses custom pinctrl states
for fast, slow, and medium signal frequencies, as well as pin pull for
SD detection.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable pinctrl for flexspi driver. Note that when flexspi is being using
in XIP mode, pinctrl settings are not required and will not be applied.
Pinctrl settings are only required when the flexspi device being used is
not the one used for XIP.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
