Check names must not contain spaces, since they are passed via `-m` in
the command-line.
Also update .gitignore and compliance.yml.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The code moves Zephyr specific code and CMakeLists.txt
under modules/fatfs/.
The commit also adds zephyr_fatfs_config.h header file, that
is now used to override FF_ options of ffconf.h file within
fatfs repository.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The update brings FAT FS revision with most Zephyr specific
source code changes removed, as required sources are now
stored in modules/fatfs/, within Zephyr project directory.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
HAL for NXP S32 is updated to a newer version, hence some headers and
macro definitions must be updated accordingly.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Add ZCBOR to the requirements-extras.txt and require at least version
0.6.0 which is the current version of the ZCBOR C library.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
This patch allows copying a URL to the current Kconfig search results.
For example, I can now share the search results for "CONFIG_TEST.*". A
new button is added to the search box that, when clicked, copies to the
clipboard the URL.
This feature is achieved by prepending query hashes with '!'. When '!'
is found, the content of the URL hash is left intact, whereas before it
was always enclosed within '^$' to produce an exact match.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If two modules started with the same prefix, e.g. nrf and nrfxlib, the
file name prefix was incorrectly set with the common prefix. Include
trailing "/" to the comparison, so that we match the full module name.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
add 2 choices for '--runtime-artifact-cleanup' option,
'passing' to delete artifacts of passing tests,
'all' to delete artifacts of both passing tests
and failing tests
keep testcase_extra.config, it contains some extra Kconfig
needed for the tests and they is only generated first time
when run retry failed
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Remove FLASH_SIZE setting, as this is now set from the SOC level via the
flash chosen node. Also, correct the flash controller node to the flash
device that implements flash support
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update rt5xx base address calculation to use the zephyr,chosen flash node
to determine flash base address. Note that due to the external flash
controller, the flexSPI base address must be used when the flash device
is on the flexSPI bus.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
FlexSPI memory map indicates that the FlexSPI register space is 128MB, not
64MB. Update this value to be correct.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove FLASH_SIZE setting, as this is now set from the SOC level via the
flash chosen node. Also, correct the flash controller node to the flash
device that implements flash support
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update rt6xx base address calculation to use the zephyr,chosen flash node
to determine flash base address. Note that due to the external flash
controller, the flexSPI base address must be used when the flash device
is on the flexSPI bus.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add dt_node_has_compat kconfig function, to check if a node path has a
given compatible string while parsing kconfig files
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add dt_node_parent kconfig function, to get parent path for a given
devicetree path when parsing kconfig files
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Call the RPA expired callback on advertising sets even when they are
not enabled.
The RPA expired callback will now be called on advertising sets
when the BT_ADV_RPA_VALID flag is cleared for the set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix RPA timeout expiration when BT_EXT_ADV has been enabled.
Always invalidate the device RPA on RPA timeout.
This RPA is used by the scan roles, and the advertiser that was started
using the bt_le_adv_start API.
Call the RPA expire callback only on advertising sets that are enabled
and not being limited by a timeout and not using the identity address.
On RPA timeout always invalidate the RPA of advertising sets that are
disabled.
Fixes: #51208Fixes: #51228Fixes: #51247
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add shell support for RPA expire callback.
This prints a message when the callback is called on the specific
advertising set.
Add a command to control the return value of this callback for a
specific advertising set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add LSI1 and LSI2 (both present on STM32WB) to the list of possible
source for LSI clock
Solve a regression for RTC counter
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add LSI clock and RTC clock source for Nucleo F103RB, L4A6ZG and
F103 mini to resolve a regression concerning the RTC counter
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
For STM32F1, F4 & L1 series, add the definition of SYSCLK to solve a
regression concerning the RTC counter
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Aside from base properties (maybe for documentation purposes),
`required: false` should not be encouraged.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Add `DevicetreeBindingsCheck` and `required_false_check()`, which
checks to make sure that no new Devicetree bindings add the
redundant `required: false` property.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
DTS property attributes are (by default) not required.
Explicitly specifying `required: false` is redundant.
Perhaps a warning to that effect would be useful.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Fixes the double up test of int_gpio.port.
Addition of VCNL4040_ALS_INT_EN macros.
Use of BIT() macro where it makes sense.
MISRA improvements.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
Saves some flash and we get priority inheritance.
Also removes lock from vcnl4040_handle_int() as it
is always called from the same thread.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
The driver has a read register, modify value, write value flow due to
needing to modify nibbles of registers at different times. The issue
this driver previously had was new incoming configurations from the
driver would be corrupted by previous configurations written into the
vcnl4040 (when there's been no power off). This would be in the case
when a device continuously power on and a developer is tweaking the
vcnl4040's configuration or when deploying firmware updates with
a new vcnl4040 configuration.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
The driver was using the i2c_transfer_dt() API incorrectly by not using the
I2C_MSG_STOP flag in the flags field.
The I2C write function can be written more simply with the basic I2C write
API so this commit also switches the code to the basic I2C write API to fix
this bug.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
Add a test that validates fetching every property from the sbs gauge driver
results in no driver error codes being returned.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Add a sample sbs gauge driver with feature parity and basic tests
comparison to its sensor counter-part. Includes a simple stub test that is
extended upon.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Both `drivers/flash/flash_shell.c` and
`samples/drivers/flash_shell/src/main.c` provide a flash shell
utility called `flash`.
Rename the latter to disambiguate.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
CONFIG_NET_BUF_VARIABLE_DATA_SIZE option had not test coverage at all,
making in vulnerable for regressions. There is no dedicated test suite
to verify this option, but at least we can enable it in a few test
suites to make sure the configuration is functional.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Document the stable API change in the net_pkt API along with the
expected action from the existing applications.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.
In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.
Update the existing codebase to provide the expected fragment length,
based on the context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The "net mem" command handler did not take the variable buffer length
configuration, and failed to build in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case variable buffer length feature was enabled, net_pkt code did
not build due to unconditional references to CONFIG_NET_BUF_DATA_SIZE,
which is not avaialable in this configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case variable buffer length feature was enabled, the TCP stack did
not build due to unconditional references to CONFIG_NET_BUF_DATA_SIZE,
which is not avaialable in this configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case Echo Request did not carry timestamp (i. e. requested payload
size was smaller than 4), there won't be a timestamp in the reply
either. Such replies should not be ignored. Instead, simply skip the
turnround time calculation if timestamp is missing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
