Use the RTIO work queue to fake the i2c submit calls for drivers which
haven't yet implemented the API. Applications can change the size of
the work queue pool depending on how much traffic they have on the buses.
Signed-off-by: Yuval Peress <peress@google.com>
This change marks each instance of the 'i2c_driver_api' as 'static const'.
The rationale is that 'i2c_driver_api' is used for declaring internal
module interfaces and is not intended to be modified at runtime.
By using 'static const', we ensure immutability, leading to usage of only
.rodata and a reduction in the .data area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Mutexs were added to improve the overlapping phenomenon
because there is a part that shares the i2c line.
Signed-off-by: yeongnam chu <yeongnam.chu@assaabloy.com>
i2c_bitbang_init takes a context as void *, so discarding const
qualifier of the driver's config. Explicitely cast to void * to fix the
problem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Updates the API and types to match updated I2C terminology. Replaces master
with controller and slave with target.
Updates all drivers to match the changed macros, types, and API signatures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds the ability for I2C drivers to report synchronous transfer stats
using a I2C specific macro to define the device instance.
The macro creates a container for device_state which allows for per
instance device class common data structure to be used in the device
class api (ex: i2c.h). This is used to maintain per driver instance
stats for all i2c drivers. This is a reusable idea across other device
classes as desired.
Using Kconfig device class stats may be turned on/off individually
this way as well, in this case I2C_STATS.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Fix the compilation of i2c_gpio.c after the gpio_config() syscall was
removed.
Fixes: 3632815e2e
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This is to make the gpio-i2c initialization occur after the GPIO pin
clock initialization.
Signed-off-by: Cassini Zhuang <cassini.zhuang@hansonggroup.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The driver must be able to read from this pin as well as write to it.
If the driver doesn't support bidirectional configuration then fall
back to the legacy mode.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove semicolon between instance invocations of DT_FOREACH_IMPL_ and
thus DT_INST_FOREACH. This provides more flexibility to the user. This
requires we fixup in tree users to add semicolon where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert the GPIO bit banging I2C controller driver to use devicetree
bindings for configuring instances.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This API will be deprecated in favor of the new API that clearly
specifies whether it works on logical or physical levels.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Modified drivers to use DEVICE_AND_API_INIT() instead of DEVICE_INIT()
This will make sure driver_api,is populated at build time and is exposed
to user space
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
If initialization fails, zero the API struct so that
device_get_binding() can't fetch it, and do not mark
the driver object as initialized to user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This driver implements an I2C interface by driving two GPIO lines under
software control.
Change-Id: Ie49cc67aed6acb30086ee851041fe2470da241cf
Signed-off-by: Jon Medhurst <tixy@linaro.org>
