Fix SD card pinctrl setup for the VMU RT1170 board. The following
changes were made:
- use the "cd-gpios" property over detecting the card using the
USDHC card detect register. This should be more reliable.
- bias the clk pin high. This matches setup for the RT1170 EVK SD
pinctrl.
- remove the drive strength setting for SD pins to align with the
pinctrl settings for low speed SD mode (50 MHz) on the RT1170 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Board initialization code should not use the network CPU management. It
acts as a permanent request for the network CPU, which causes its users
to be unable to turn it off. Instead, let the board initialization code
control the network CPU directly. It sets initial state of the network
core but does not have any impact on sharing the network CPU as a
resource between its users.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Add SPI to list of supported periperals by
nrf54h20 Application and Radio core.
This is needed to run following tests in Twister
https://github.com/zephyrproject-rtos/zephyr/pull/71677
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Enable ADP5585 as GPIO expander on i.MX93 EVK.
- Add dts node for ADP5585 under lpi2c2.
- Add gpio-hog for EXP_SEL signal.
- Disable lpi2c2 and adp5585 node by default
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
Add USB OTG_FS on nucleo_u575zi_q
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Akin to the changes in
ab29ee5e0b3e07afdca308255487703d940ced32
Add missing mdio node for
stm32h747i_disco/stm32h747i_disco_stm32h747xx_m7
Without this, samples/net/sockets/echo_server
fails to build in this board.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Added the Round Display for Xiao boards as a shield.
Added a xiao_adc node to Xiao board dtsi files.
Signed-off-by: Nicolas Goualard <nicolas.goualard@sfr.fr>
Add support for IS66WVQ8M quadspi PSRAM on the RW612 BGA board, and
update board pin control to enable muxing PSRAM pins on the FlexSPI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The nRF54H20dk has mx25uw6345g flash device on board. Added DTS
description and pinctrl configuration.
The flash device node is disabled by default. The flash device needs to
be powered-on using the nRF Connect for Desktop Board Configurator
application.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
In the <board>.dts file, the definition for usart0 was found to be
redundant as the same information is already provided in the included
.dtsi file. this commit removes the duplicate definition of usart0,
resulting in a cleaner and more maintainable device tree configuration.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@capgemini.com>
Disable this explicitly as done for other boards using a USB console by
default, prevents a build warning:
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit should add all the functionality needed for the MIPI DBI
driver to work when PM is enabled.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
QEMU 9.0 removes the `-no-acpi` option, which breaks emulation on x86
platforms when CONFIG_ACPI is not set. See:
https://github.com/zephyrproject-rtos/zephyr/issues/72191
This PR replaces `-no-acpi` with `-machine acpi=off`, as specified by
the QEMU documentation. It works on QEMU 8, but not been tested on
earlier versions.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
add support for retrieve runtime clock frequency (HW clock
cycle per sec) for APIC TSC timer for various Intel platforms
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
In 42c6f3311b (boards: stop using kscan for LVGL touch input), GT911
node label was renamed for rk055hdmipi4ma0 shield. The node label rename
was missed in the RT595 EVK overlay, fix this.
Fixes#69302
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move the LLVM fuzzing specific code out of the board main
file and into the sample.
That way we avoid needing to duplicate it for native_sim and
avoid having a very adhoc interface between the fuzzer test
and runner code.
Also ensure it works for native_sim and not just native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add pin control group for UHS modes for H3ULCB, Salvator XS M3
boards to appropriate dts files. Both 'uhs' and 'default' pins
states have the same properties for eMMC, e.g. 1.8V.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
The DCCM configuration was set inconsistently between nsim and
mdb arguments
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
After recent HWv2 model there is defconfig file
missing, so we got incorrect platform configuration. Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add a shield definition for the MikroElektronika Weather Click board.
The Weather Click board features the BME280 sensor, a combined humidity,
pressure, and temperature sensor from Bosch Sensortec.
This shield can be used with any board equipped with a mikroBUS socket
that provides a `mikrobus_i2c` devicetree node label.
Signed-off-by: Chris Wilson <chris@cgnd.dev>
Added code partitioning for ST Nucleo G431RB and G474RE boards.
Defined flash partitions including "mcuboot," "image-0," and "image-1".
Signed-off-by: Hudson C. Dalpra <dalpra.hcd@gmail.com>
The ip_k66f now supports its KSZ8794CNX switch IC via DSA subsystem.
With the samples/net/dsa it is possible to handle LLDP frames on this
board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
qemu_malta//be -> qemu_malta/qemu_malta/be
This caused the board not to work with Twister.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
USB_NATIVE_POSIX dependencies were partially broken for
native_sim as the option was duplicated in the boards
defconfigas.
Let's not define it also in the board Kconfig.defconfig
but instead default it to y in its main definition if
building for either native_posix[//64] or native_sim[//64]
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of having the boards override the default
in their Kconfig.defconfig
let's just default to IMMEDIATE logging mode in the main
definition if we are building for a ARCH POSIX board.
This avoid issues w dependencies being lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The EEPROM_SIMULATOR already defaults to 'y' with proper
dependencies in its main definition in drivers/eeprom/Kconfig.
Let's not define it also in the board Kconfig.defconfig
as that causes dependencies to be lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The FLASH_SIMULATOR already defaults to 'y' with proper
dependencies in its main definition in drivers/flash/Kconfig.
Let's not define it also in the board Kconfig.defconfig
as that causes dependencies to be lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch the default MCUBoot FW Update mode from Swap & Scratch
to more preferable Swap & Move for the rest of NXP boards.
Delete the scratch partition. Save RAM & ROM.
Slot 0 has one additional sector, for use with
the swap move algorithm.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
