Move some STM32 drivers related Kconfig symbols from `config`
to `menuconfig` when driver options depends on these symbols.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
This driver is mostly rewritten from scratch, with some parts borrowed
from the usb_dc_rpi_pico driver implemented by Pete Johanson.
This driver does not use any function from RPI PICO HAL and actually
could be furter improved to not use any defines or types from the HAL as
they are confusing and overdo it with volatile qualifiers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The STM32 SPI driver, `spi_ll_stm32.c`, reads the clock frequency via
`clock_control_get_rate()`. The first `clocks` index is used as subsystem
argument if there is no second index, but this is not the source clock for
SPI 1, 2, and 3.
This causes the prescaler value calculation to be incorrect, resulting in a
frequency potentially above the `spi-max-frequency` value.
Add clock source for SPI instances 1, 2 and 3, that matches the default
clock configuration register reset value, which resolves the issue.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This commit introduces a new Kconfig option `CONFIG_SRAM_RETENTION_MODE`
that allows the configuration of SRAM retention mode during the
initialization phase of the firmware boot-up process. By default, the
retention mode is enabled to maintain the existing behavior. However,
this option provides the flexibility to disable the retention mode if
needed, without modifying the Zephyr codebase.
The SRAM initialization functions `hp_sram_init` and `lp_sram_init` in
`sram.c` have been updated to conditionally set the retention mode based
on the value of this Kconfig option.
Additionally, an unused macro `DELAY_COUNT` has been removed from
`sram.c` to clean up the code.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
There is no clear way for a candidate to assume the role of Maintainer
if the candidate is neither a Contributor nor a Collaborator. To avoid
disputes and confusion, candidates who are neither Contributors nor
Collaborators must be approved by the TSC before they can assume the
role of Maintainer.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Let's disable the default seeding done by the native_posix
entropy driver to allow the normal simulation initialization
of the random number generation to take place.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a new kconfig option which can be used to disable
the default seeding of the host standard library random
generator by this driver.
This allows some other component to do so without this component
default initialization interfering.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Zephyr drivers have typically one log level defined per class. The video
drivers were making exception. This adds the missing log level for video
drivers.
Since all headers had to be modified, this also:
- Update the log initialization to the new syntax from 5e34681
- Sort the #include list to something like #41543
Signed-off-by: Josuah Demangeon <me@josuah.net>
When scanning and connecting in parallel with
CONFIG_BT_SCAN_AND_INITIATE_IN_PARALLEL enabled, a Bluetooth controller
may choose different scheduling approaches based upon the provided
parameters.
Nordic's SoftDevice Controller performs better when both roles
use the same scan window and scan interval. To help customers
choosing the right configuration, this should be documented.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The function took the uri as a `char *` but is in fact
not a null terminated string so change the type to uint8_t *.
Add a check fro uri_len == 0 before doing uri_len - 1
Changed the found check to just check the first octet rather
than the more costly strlen.
Fixed the type of the iterator
Add a break in the loop as we only need to find one ":"
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
since stm32h7.dtsi is already include in st/h7/stm32h743.dtsi
we don't need to include here again.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
A warning was issued in the build as the rtio tx and tiny_tx buffer
pointers are now labeled const. The internal API expects mutable buffers
so an explicit cast is needed here to avoid the warning.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Updates references to the net-tools project to refer to the correct
placement of net-tools under tools.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add information about main(int, argc **) in places where the documentation
stated that only parameterless main could be used
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add bootargs support to zefi. This implements
get_bootargs() when both efi and bootargs are
selected in config.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Zefi was only including include/zephyr but not the generated include
directory that contains autoconf.h. This commit fixes that.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add bootargs support for multiboot. This
implements get_bootargs() when multiboot and
bootargs are selected in config.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add support for passing args to main(). The
content of bootargs is taken from get_bootargs()
which should be implemented for each loader and
then its split into args and passed to main.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Added links pointing to the Dedicated image build targets
from Optimization tools page for ram_report, rom_report, footprint,
puncover, and pahole.
Reported by @markaj-nordic.
Signed-off-by: Grzegorz Ferenc <Grzegorz.Ferenc@nordicsemi.no>
do a cold reboot by default if no option is provided
for `kernel reboot`, instead of requiring to
type `kernel reboot cold`.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Move the lower bounds check of the enum value to a BUILD_ASSERT and make
sure the enum type is an unsigned integer.
Signed-off-by: Adrian Friedli <adrian.friedli@husqvarnagroup.com>
Add a description of the feather connector GPIOs. This enables a
featherwing shield to reference the GPIO by its label.
Signed-off-by: Philip-Dylan Gleonec <philip-dylan@gleonec.bzh>
Define the feather_spi SPI bus, which points to the corresponding
SERCOM. This bus label can be used by the featherwing family of
shields.
Signed-off-by: Philip-Dylan Gleonec <philip-dylan@gleonec.bzh>
Fix scan_update() implementation for missing flags clear
that prevented starting scanning after previous attempt to
start failed due to parameters being rejected by the
Controller.
Example, attempting to start coded PHY scanning with a
Controller implementation that does not support it can fail,
but attempting again without coded PHY scanning should
succeed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit updates revision of hal_nordic to bring the latest changes
in the nRF IEEE 802.15.4 driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The TBS client callbacks are just informative so we
provide the information to multiple listeners.
To support this for the long strings, the function
handle_string_long_read was refactored.
This also allows for multiple users of the TBS client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the encrypt state was changed via
bt_bap_scan_delegator_mod_src then we didn't set the bad
broadcast code correctly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bsim test that verifies the behavior when the
assistant provides an incorrect code to the broadcast
sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function had marked the type as char *, but it was in fact
not a string but rather a uint8_t array.
Marked the type properly and added a cast when using it with
bt_tbs_remote_incoming.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CAP commander used bt_audio_valid_ltv which required
BT_BAP_STREAM to be enabled, but the CAP Commander does not
need BT_BAP_STREAM to be enabled.
Moved the function to audio.c which is always compiled for
the CAP Commander, thus removing the requirement for
BT_BAP_STREAM and the accompanying bt_bap_stream.c file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The UTF8 implementions for both client and server
both use the utf8 API which require CONFIG_UTF8.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function had marked the type as char *, but it was in fact
not a string but rather a uint8_t array.
Marked the type properly and added a cast when using it with
strings.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Require the presence of the nrf-regtool package as well as its exact
version, failing the build whenever the required version is not found in
the system.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
YD-STM23H750VB board has 128 Kbytes of flash memory, 1 Mbytes of SRAM
and 16 Mbytes onboard SPI norflash.
Signed-off-by: John Sanpe <sanpeqf@gmail.com>
Modify the CAP stream callbacks so that the application
callbacks are called before the CAP initiator.
This allows the application to abort/cancel a procedure
before we send out any future request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
