This commit defines a public API for zperf upload functionality. The
UDP/TCP uploader modules are decoupled from shell, allowing to perform
uploads directly from the application code. The shell submodule makes
use of this new public API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixup ADC sample support for boards with LPADC present. This ADC only
supports an external reference voltage, which is a board-specific value.
Add reference voltage values for all supported boards.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds a note on MCUmgr Bluetooth and UDP transports now being
automatically registered without needing an application to
manually register them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This moves the UDP and Bluetooth initialisation for MCUmgr to be
performed automatically with the new hander registration feature.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Makes group registration functions for MCUmgr handlers static as
they are registered automatically at startup.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a note on MCUmgr handlers now being automatically called
without needing an application to manually register them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This replaces the requirement for applications to manually
register MCUmgr handlers by having an iterable section which
then automatically registers the handlers at boot time.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Added information about pin output direction into
Z_PINCTRL_STM32_PINCFG_INIT if output_low or output_high is provided.
GPIO output flag is set in configuration struct and this will end up
being loaded into MODE register. Because of that it is no longer
required for pinctrl_configure_pins() to set MODE register value for
GPIO input/output.
Fixes#53141.
Signed-off-by: Lukasz Mazur <lukasz.mazur@hidglobal.com>
Add the ISO packing field when creating a unicast group.
This refactors the structure of the unicast group create,
as it now takes both the packing as a group parameter, as well
as an array of stream-specific parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update UF2 family ID for the entire STM32F4 series, except STM32F407xx
which have their own dedicated IDs.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Different CMake versions can have very subtle differences, for
instance CMake 3.21 links object files in a different order compared
to CMake 3.20; this produces different binaries.
CMAKE_VERSION is required information to track binary differences
between two build systems.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The previous PR had been merged mistakenly, and it contained a reference
to a PR. Point to a SHA instead now that
https://github.com/zephyrproject-rtos/hal_nxp/pull/213 has been merged.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
imgtool could be used for many things, but
CONFIG_MCUBOOT_EXTRA_IMGTOOL_ARGS, despite it's generic name, is only
applied when signing. Make it even more clear in the prompt and help
text that it's limited to signing.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add uart_configure and uart_config_get functionality to
MCUX flexcomm driver to be able to dynamically configure
flexcomm uart at runtime.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add support for SparkFun RED-V Things Plus board that is
a development board with a SiFive FE310-G002 RISC-V SoC.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Add cpu-power-states property in cpu0 node to describe the
two supported power states idle and suspend_to_ram
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
The MKFS function declaration is conditionally compiled
based on the MKFS kconfig, which prevents it from being documented.
Remove the conditional.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add configurations flashing and debugging for openocd.
The change makes `west debug` and `west flash` use the setting defaultly.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
When there is an ACL disconnect, or the unicast group is otherwise
deleted, the endpoints were not properly handled, causing
incorrect `dir` values and ASSERTs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When adding or removing a stream from the group, the
endpoint may or may not have been allocated depending
on the state of the endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The hci_le_setup_iso_data_path function required that if
the path->cc was set, the length could not be 0.
There is no reason why it should not be allowed to be 0
in that case.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast client could not create a CIG with a unidirectional
CIS, because it would not set the correct values as per the
HCI spec for the unused CIS direction.
Instead of implementating a work around, this commit modifies
it so that for unidirectional CIS, we copy the QoS values
to the unused direction, so that we always set valid values,
but it also allows us to actually use that CIS direction later,
assuming that the QoS settings does not change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For the unicast client, the direction for the endpoint
is reversed in terms of RX/TX, i.e. a sink endpoint is
RX for the unicast server and broadcast sink, but TX
for the unicast client, and similar for the source endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The MKFS portion of the test is still was being included
in the build when it shouldn't because of a file glob
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
As written, the title and description of the Kconfig option seem to
specify the logging sub-system will not flush until the buffer is full.
Someone reading this would expect that shorter log message will not be
flushed until the specified number of bytes accumulate.
This is not the case. Each log message is flushed when finished. The
size is only the maximum bytes of a single formatted message's contents
that will be accumated before the backend flushes.
What's more, it only applies in deferred mode. In immediate mode there
is no buffering, not just of multiple log messages but also of the
message contents as they are formatted.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
The Swan was originally cloned from the Nucleo-L4R5ZI.
The Nucleo is a sister board, but not identical
and some artifacts of cloning are incorrect.
Signed-off-by: Zachary J. Fields <zachary_fields@yahoo.com>
There were some requests from users for adding the possibility
of setting default openthread tx output power using kConfig.
It is possible by adding the CONFIG_OPENTHREAD_DEFAULT_TX_POWER
kConfig and assigning it to the tx_power variable in the radio.c
file in the Openthread module.
Added the possibility to set default openthread power using
kConfig.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
bcdHID is intended for the spec version of USB HID. It was pointing to the
v1.1 bcdUSB define which happens to be the same value for the v1.10 hid
spec version. This corrects it to use the v1.11 HID spec.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
While operating as a Source, a disconnect can be missed
if using an E-Marker cable that presents an Ra. This change
detects a disconnect as follows, while operating as a Source:
CC1 CC2
-----------
OPEN OPEN ----> Nothing attached
OPEN Ra ----> Powered cable without Sink attached
Ra OPEN ----> Powered cable without Sink attached
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
If the bootloader changes iof_en/iof_sel settings before zephyr launching,
GPIO does not behave correctly.
These values should be 0 initially, Initialize to 0 at GPIO initialize.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
When checking if any UART TX/RX IRQs are pending, the driver should also
consider whether these IRQs are enabled. Or we still get pending status
set even if the related interrupts are disabled.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add a note about the "branch out of date" and "Update branch" GitHub
feature. That message is confusing for new users and we often see people
losing approvals and introducing merge commits with it. Adding a note
in the contribution guidelines would hopefully help some.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There hasn't been any topic branch in widespread use. This point is
still relevant for backports or some advanced usage, but since this list
is meant to help contributor approaching the project it may be a good
idea to drop the point and make the list a tiny bit shorter and less
intimidating.
Instead, mention that main should be used "if unsure" in the previous
point.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add the possibility to use the clock parameter in dts to set the clock
source of I2C devices for all STM32 MCUs.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Define SYSCLK as the default I2C source clock for I2C1 on STM32F0x
and all I2Cx on STM32F3x.
On most series, the default I2C clock source (when it exists) is PCLK.
This clock does not exist as I2C clock source on FO & F3 and the default
one is HSI. Since HSI is not necessarily enabled we explicitly set it
to SYSCLK instead.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Include the new clock file dedicated for STM32F7 instead of the F4 one
previously used.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add a new dedicated clock control header file for the STM32F7 series.
It is copied from the STM32F4 file with added clock defines and helpers
to select peripheral clock sources that are specific to F7 series.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
dt-bindings f7
Fix the driver so that after a call to uart_rx_disable() it does not
allow re-enabling RX until the UART_RX_DISABLED is generated (what
means that the disabling procedure is complete). Otherwise, it is
possible that the RXTO event from the previous RX is handled right
after a new RX is started, and the RX buffer pointer gets corrupted
in the `rx_flush()` function.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The test in its default configuration needs 3600 seconds to complete,
adjust timeout for twister to meet that.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
This enables the USB-CDC port for console output by default when
configuring for the thingy53_nrf5340_cpuapp board. This is needed
as the UART on this board is not connected.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
NPCX9 series chips include a SHA hardware accelerator, which supports
SHA256/SHA384/SHA512 hashing and a library (APIs) in the on-chip ROM.
This commit adds the driver support by wrapping the on-chip ROM APIs.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Refactor the test following latest changes on the regulator API. The
test has now a single case that tests all the features of the driver at
once.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
