On platforms where reset vector catch is not possible
it is useful to have a compile-time option to spin
at the reset vector allowing a debugger to be attached
and then to manually resume execution.
Define a config option for arm64 to spin at the
reset vectdor so a debugger can be attached.
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
When using CONFIG_NPCX_IMAGE_OUTPUT_HEX, set the hex_file
runners_yaml_props_target property, so that west flash will flash the
correct file.
Change the cmake flash rules to populate the hex_file value in the
runners.yaml file if either CONFIG_BUILD_OUTPUT_HEX is enabled or some
cmake file set the runners_yaml_props_target hex_file property.
Update the npcx9m6f_evb instructions now that the filename is implicit.
Signed-off-by: Jeremy Bettis <jbettis@google.com>
Add clang-format to the requirements-extras.txt and require a version
compatible with the configuration options present in the .clang-format
file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a maintainership section in the ext-source template, forcing future
contributors to identify one or more maintainers.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The STM32H7A3 SoC has 64 kB of ITCM RAM mapped at address 0x00000000.
Tested using zephyr_code_relocate().
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Complete the remote initiated version exchange if a LL_VERSION_IND is
received while already having responded in an earlier version exchange
procedure.
Clarify comment regarding how to handle this invalid behaviour.
This has been seen when running the LL/CON/CEN/BI-12-C test on EBQ.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Calculation of the DLE related parameters (rx/tx octets and time) depend
on the actual phy in use. For this reason the PHY settings must be
initialised before doing the DLE parameter calculations
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
STM32_DT_CLOCKS was designed to take a device tree node label name as
argument: STM32_DT_CLOCKS(uart1)
Change its implementation to take a node identifier instead:
STM32_DT_CLOCKS(DT_NODELABEL(uart1)).
This make its usage more flexible since the argument can now be extracted
from other DT macros such as DT_PARENT. Then, the following can be done:
STM32_DT_CLOCKS(DT_PARENT(child_node_label)).
Since it is now possible implement STM32_DT_INST_CLOCKS using
STM32_DT_CLOCKS.
Finally, update existing STM32_DT_CLOCKS users and convert
STM32_INST_CLOCK_INFO users to STM32_CLOCK_INFO.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
* Convert test suite declaration to `ZTEST_SUITE()`
and test case declaration to `ZTEST()`.
* add `CONFIG_ZTEST_NEW_API=y` to prj.conf
Fixes#46793
Signed-off-by: Christopher Friedt <cfriedt@fb.com>
On remote terminate on central the conn clean-up would happen before ack
of terminate ind was sent to peer.
Now clean-up is 'postponed' until subsequent event.
Also now data tx is paused on rx of terminate ind to ensure no data is
tx'ed after rx of terminate ind
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
On disconnect with refactored LLCP, if data tx is paused,
possibly 'waiting' tx nodes would not get released.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
On FVP platform, when parameter 'bp.refcounter.use_real_time' is set
to 1, cntvct_el0 isn't count from 0 and may cause overflow issue in
first timer compare interrupt.
'bp.refcounter.use_real_time' is 0 by default.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Fast hardware with slow timer hardware can trigger and enter an
interrupt and reach 'sys_clock_set_timeout' before the counter has
advanced.
That defeats the "round up" logic such that we end up scheduling
timeouts a tick too soon (e.g. if the kernel requests an interrupt
at the "X" tick, we would end up computing a comparator value
representing the "X-1" tick!).
Choose the bigger one between 1 and "curr_cycle - last_cycle" to
correct.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Only apply change to effective DLE times if current max times are too
small to accommodate. Similar to legacy implementation
Update unit tests to new DLE ntf behavior
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The magnetometer data read from AK9863 is assumed to be big endian
(like the accelerometer & gyroscope data).
However it is in little endian, which means the appropriate byteorder
function is sys_le16_to_cpu().
See the MPU925 register map:
https://3cfeqx1hf82y3xcoull08ihx-wpengine.netdna-ssl.com/wp-content/uploads/2017/11/RM-MPU-9250A-00-v1.6.pdf
At 5.6 HXL to HZH: Measurement Data
Signed-off-by: Loris Schmit <loris.schmit@inovex.de>
Some text in help section was documenting the compatibility of driver
variants with stm32 series.
This is duplicate of information versus device tree which should be
used as single source of information for hardware description.
Remove these lines, so we don't have to touch this driver each time
a series is added.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some TFM samples run different test suites/cases based on
which configurations are set.
Enumerate more of these.
For samples/tfm_integration/tfm_psa_test,
add the following new build configurations:
* Add CONFIG_TFM_PSA_TEST_STORAGE
* Add CONFIG_TFM_PSA_TEST_CRYPTO
* Add CONFIG_TMF_PSA_TEST_INITIAL_ATTESTATION
For samples/tfm_integration/tfm_regression_test,
add this to all build configurations:
* Add CONFIG_TFM_PARTITION_PROTECTED_STORAGE
* Add CONFIG_TFM_PARTITION_INTERNAL_TRUSTED_STORAGE
* Add CONFIG_TFM_PARTITION_CRYPTO
* Add CONFIG_TFM_PARTITION_INITIAL_ATTESTATION
* Add CONFIG_TFM_PARTITION_PLATFORM
* Add CONFIG_TFM_PARTITION_AUDIT_LOG
And build the above for CONFIG_TFM_IPC as well.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
They may be disabled in some environments (such as Gentoo based
developer mode on Chromebooks). Use extended regular expressions
instead.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
The board enabled power switches at init time, hardcoding switch
information in a board C file. This patch makes use of the regulator
infrastructure to describe such power switches in DT, making the board
specific C code obsolete. CONFIG_REGULATOR is only enabled if
CONFIG_SENSOR=y, as switches power sensors.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The board enabled power switches at init time, hardcoding switch
information in a board C file. This patch makes use of the regulator
infrastructure to describe such power switches in DT, making the board
specific C code obsolete. CONFIG_REGULATOR is only enabled if
CONFIG_SENSOR=y, as switches power sensors.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move variable declaration inside if-def to remove compiler
warning when building the driver without trigger.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Remove wrapper functions for getting i2c bus and i2c bus
address. This is done here to make it easier to move this
driver to i2c_dt_spec while still having clear separation
between commits.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
