As the pwm interface only takes nanosecond for parameter,
the original test case for mircosecond is not needed.
Check github issue 44887 for more info.
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
Make sure all tests are run with the legacy include path option
disabled. This should prevent code not using includes with the
<zephyr/...> prefix to pass tests and so getting merged.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update the script so that it handles generates files using the
<zephyr/...> include prefix.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update the script so that it handles generates files using the
<zephyr/...> include prefix.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The gen_usr_tables scripts were not updated to make use of the
<zephyr/...> include prefix, fix this.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Linker files were not migrated with the new <zephyr/...> prefix. Note
that the conversion has been scripted, refer to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add pinmux settings for lpadc to LPCXpresso55s69 and LPCXpresso55s28
boards. Enable ADC driver sample for LPCXpresso55s69, to aid in testing
pinmux settings.
Fixes#45401
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Devices using the MCUX FlexSPI flash driver erase their flash too
slowly, causing the usb stack to freeze, and USB DFU utilities to
report a timeout. Enable IMG_ERASE_PROGRESSIVELY for SOCs using the
MCUX FlexSPI driver to prevent this error.
Fixes#45359
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some SOCs, such as the RT1064 and RT1024, use internal flash and don't
define pinmux settings for the flexspi. Don't check the return code of
pinctrl_apply_state, because the flexspi driver will fail to initialize
when the pin mux settings are simply not required.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add SD response type masks, to allow drivers to mask out the
SPI or SD native mode response type based on the SD host controller
mode they use.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SDMMC busy wait timeout was incorrectly waiting for
CONFIG_SD_DATA_TIMEOUT microseconds, but should be waiting for
CONFIG_SD_DATA_TIMEOUT milliseconds. Multiply wait value by 1000.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Assign BT_CTLR_ADV_DATA_LEN_MAX value to 255 to match the
corresponding BT_CTLR_SCAN_DATA_LEN_MAX value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Strictly restrict AD Data length to BT_CTLR_ADV_DATA_LEN_MAX
when there can be free bytes in Advertising PDU with common
extended header format of less that the maximum 64 bytes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change bt_audio_broadcast_sink_sync to use an array of pointers
to bt_audio_streams, instead of an array of streams. This makes
the API more flexible, as well consistent with the broadcast
source and unicast APIs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_audio_broadcast_source_create function will now
take an array of stream pointers, instead of an array
of streams. This is to make the API more flexible as
well as more consistent with the unicast API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In bt_audio_unicast_group_create, bt_audio_unicast_group_add_streams
and bt_audio_unicast_group_remove_streams to use an array
of pointers, instead of an array of streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the UPLLCK clock for the CAN controller as recommended by the Atmel SAM
E70 data sheet.
Move the configuration of the clock prescaler from Kconfig to devicetree
and limit it to the values recommended by the SAM E70 datasheet.
Fixes: #45012
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Enable the UTMI PLL (UPLL) clock and add a static definition of its clock
frequency.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Enable the UTMI PLL (UPLL) clock and add a static definition of its clock
frequency.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
This extends implementation with sending Preset Changed
notification/indication when preset changes its availability or is
added or deleted.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In #45014 the m_can compatible identifier was changed from "m-can-base"
to "m_can-base" while #45216 was being developed. This commit updates
the dts for u5 to the latest format.
Signed-off-by: Peter Maxwell Warasila <madmaxwell@soundcomesout.com>
Since the pinctrl header file can be included by user-created drivers,
an application developer including this file and only applying
-Wextra to the application source files will see many warnings.
-Wold-style-declaration warning is also emitted if 'static' is not
at the beginning of a declaration.
Signed-off-by: Pete Dietl <petedietl@gmail.com>
This is a follow-up to commit fd7633126e.
For some reason the above commit added several switch cases without
required break statements. In effect, the same pin could get assigned
to multiple signal lines in QDEC or QSPI peripherals if not all pins
were defined for them in devicetree, and consequently these peripherals
could not work properly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to bring consistency in-tree, migrate all kernel code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Doxygen only serves the latest couple of releases from their website.
However, all releases (including the old ones) can be downloaded from
Sourceforge.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There shouldn't be any reason to be able to modify the passed in SSID,
and having this non-const gives application warnings if passing a
constant string.
Signed-off-by: Ole Morten Haaland <omh@icsys.no>
Promptless choices can show up as parents when, e.g., people define
choices in multiple locations, including modules. Render them using the
built-in Kconfig expression to string formatter, so that they show up as
'<choice (...)>'.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow CTS line to determine UART shutdown for any sleep mode.
This allows lower average current consumption for LITE
HIBERNATE mode.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
In order to bring consistency in-tree, migrate all includes within
include directory to the new prefix <zephyr/...>. Note that the
conversion has been scripted, refer to zephyrproject-rtos#45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The ztest unittest module relies on some headers that fake the real
ones, e.g. <zephyr/arch/cpu.h>. When new header location was introduced,
their path was not updates. This patch fixes this problem and provides
ztest with both, legacy and new include paths so that it can keep
working on both scenarios.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
