The GIC-400 driver currently only supports SPIs because the (32) offset
for the INTIDs is hard-coded in the driver. At the driver level there is
no really difference between PPIs and SPIs so we can easily extend the
driver to support PPIs as well.
This is useful if we want to add support for the ARM Generic Timers that
use INTIDs in the PPI range.
SPI interrupts are in the range [0-987]. PPI interrupts are in the range
[0-15].
This commit adds interrupt 'type' cell to the GIC device tree binding
and changes the 'irq' cell to use interrupt type-specific index, rather
than a linear IRQ number.
The 'type'+'irq (index)' combo is automatically fixed up into a linear
IRQ number by the scripts/dts/gen_defines.py script.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Make sure we do enable size tracking with options that depend on the
size of generated binaries to be available.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Shortens main() a bit and makes it easier to read.
Rename write_flash() to write_flash_node(), and let write_flash() be the
top-level function. Also move the looking-up of the /chosen properties
into the the various helper functions themselves, and shorten some names
that are clear in context.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Make the node/ordinal list a part of the header comment to make the
output prettier.
Before:
/*
* Generated by gen_defines.py
*
* DTS input file:
* rv32m1_vega_ri5cy.dts.pre.tmp
*
* Directories with bindings:
* $ZEPHYR_BASE/dts/bindings
*/
/* Nodes in dependency order (ordinal : path): */
/* 0 : / */
/* 1 : /aliases */
/* 2 : /chosen */
/* 3 : /connector */
/* 4 : /cpus */
/* 5 : /cpus/cpu@0 */
/* 6 : /gpio_keys */
/* 7 : /soc */
...
After:
/*
* Generated by gen_defines.py
*
* DTS input file:
* rv32m1_vega_ri5cy.dts.pre.tmp
*
* Directories with bindings:
* $ZEPHYR_BASE/dts/bindings
*
* Nodes in dependency order (ordinal and path):
* 0 /
* 1 /aliases
* 2 /chosen
* 3 /connector
* 4 /cpus
* 5 /cpus/cpu@0
* 6 /gpio_keys
* 7 /soc
* ...
*/
Also move the writing of the top comment and the node comments into
separate functions, to shorten main() and make it easier to follow.
Piggyback some minor comment-related simplifications.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
64BIT has no prompt. Assignments in configuration files have no effect
on symbols without prompts. A prompt means the symbol is
user-configurable.
64BIT is instead enabled indirectly through being selected by
BOARD_QEMU_RISCV64, which is enabled in the same configuration file.
Detected through some work-in-progress improved error checking.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gcovr is already a dependency in scripts/requirements.txt. The
visualization is different, but the functionality should be the same.
Tested with gcovr 4.2.
Relates to #17626.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Add device tree fixups for the NXP LPI2C bus timeout property to the
NXP i.MX RT and Kineties KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add property for specifying the bus idle timeout for the NXP
i.MX/Kinetis LPI2C I2C controller.
Enabling the bus idle timeout helps the controller to recover from
e.g. EMC causing false clock pulses/spikes on the SCL line.
Without a timeout the LPI2C controller will assume that another bus
master took over the I2C bus and thus refuses to issue a I2C START
condition.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
CPU_MINUTEIA has no prompt. Assignments in configuration files have no
effect on symbols without prompts. A prompt means the symbol is
user-configurable.
CPU_MINUTEIA is instead enabled indirectly through being selected by
other symbols.
Detected through some work-in-progress improved error checking.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use a top-level 'if' instead of three separate 'depends on'. They're
exactly equivalent (top-level 'if's are just a shorthand for adding
'depends on' to each item within the 'if').
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
USE_CODE_PARTITION is a bit vague as a symbol name ("use code partition
how?"). Rename it to USE_DT_CODE_PARTITION to make it clearer that it's
about devicetree.
This would break any third-party configuration files that set it, but
it'll generate an error since kconfig.py promotes warnings to errors, so
it's probably not a big deal.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The prompt and help string for USE_CODE_PARTITION were too terse and
didn't make it clear that it's related to devicetree, which confused me.
Spell things out in more detail.
Unless the meaning of a symbol is completely obvious from context, aim
for at least a few sentences of help text. Think about what would be
confusing for someone coming at it without much context.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Having FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE always configurable froze
their values at 0 when BOOTLOADER_MCUBOOT was enabled in menuconfig,
when instead the values from /chosen/zephyr,code-partition in devicetree
should be used. BOOTLOADER_MCUBOOT selects USE_CODE_PARTITION, which is
a flag to use the devicetree information.
To fix it, only make FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE configurable
when USE_CODE_PARTITION is disabled. It looks like no configuration
files set them at the moment.
See the added documentation in
https://github.com/zephyrproject-rtos/zephyr/pull/20722 for an
explanation of why this happens. This bit novalisek in
https://github.com/zephyrproject-rtos/zephyr/issues/20673.
Fixes: #20673
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly introduced symbol.
Also clean up a header to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added leak suppression, by implementing __lsan_default_suppressions
function, for SDL2 and X11 library which are used by the SDL display
driver.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
On power-on boot-ROM is mapped to address 0 in HSDK board.
Normally later when U-Boot gets started by boot-ROM we change mappings
so that real DDR is mapped to entire address space including 0:
https://elixir.bootlin.com/u-boot/latest/source/board/synopsys/hsdk/hsdk.c#L474
But if U-Boot is not started (which is controlled by the BIM dip-switch
on the board) boot-ROM remains mapped to 0, and essentially any attempt
to write to that location fails, thus we cannot upload contents of our
target Elf there even with JTAG.
The next logical option is to use beginning of the non-translated
memory region 0x8000_0000 which we typically use for loading
U-Boot & Linux kernel on ARC boards. But in case of HSDK
we have DCCM (Data Closely-Coupled MEmory - fast on-chip SRAM)
mapped there and since we cannot execute code from DCCM
we need to skip that region as well which gives us the next option
being 0x9000_0000 . That's because DCCM owns entire 256 MiB "aperture"
even though it may have much smaller size up-to 8 MiB.
We are mapping only 5 apertures because the last two
(0xe000_0000-0xffff_ffff) are used for peripherals and AXI.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
When Friend node tries to send Friend Clear message to other
Friend nodes, it should use the subnet information based on
the net_idx from friendship.
Fixes#21165
Signed-off-by: Maximus Liu <maximus.liu@gmail.com>
Change the DTS preprocessor working directory from the binary
directory to the application directory.
This is done so that the user can specify
-DDTC_OVERLAY_FILE=overlay.dts with a relative path from the
application directory as is possible for CONF_FILE, and as is
reasonably expected to be possible by users.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add "sample quit" shell command which can be used to stop the
sample application and allows the generation of coverage report.
Fixes#21099
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Nordic SOC doesn't support multiple system power states, only one
deep sleep state. Replace the old example with a simpler one that can
be used to measure CPU active, normal sleep, and system off modes.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We now use EDTS and gen_defines.py to generate DTS defines. We
deprecated the old script and defines several releases ago, so lets now
remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In board pinmux.c ifdef of the form DT_GPIO_KEYS_SWx_GPIO_CONTROLLER
should be DT_GPIO_KEYS_SWx_GPIOS_CONTROLLER.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Print all tests using a tree structure (depends on anytree module). This
now can be done using --test-tree option.
sanitycheck --test-tree -T tests/kernel/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit removes the CMakeLists.txt file for the stale 'random'
driver sample.
The 'random' driver sample was previously renamed to 'entropy'.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Before we try to set IP addresses to the network interface,
make sure that the interface is up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add build time check that guarantees that iface_api struct is the
first entry inside L2 driver data. This makes sure we do not miss
a case when the ordering of the fields in the struct is changed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The definition was removed in commit 7ccc7889fa ("logging: Remove
SYS_LOG implementation").
Adding detection of unused symbols in samples and tests to CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Basic tool to help checking Kconfig options against a list of
hardening preferences.
This tool is available as a kconfig target, so to run it:
make/ninja hardenconfig
[Flavio Ceolin: Simplify logic and fix python lint issues]
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The implementation did not account for the incrementing the reference
count past the maximum positive value. Doing so on a signed integer
results in undefined behavior. Switch to an unsigned integer where
such an increment results in a zero count, and add an assert that this
has not happened.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When items were removed from the list there was not lock which may
lead to race condition and list corruption. Extracted list handling
into external function.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If clock started immediately after requesting then request was
not yet placed in the list and user callback was not called.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The original v1.3 had MMA8653+MAG3110, but v1.5 has verified LSM303AGR
and theoretical FXOS8700. Add the v1.5 variant 1 nodes in disabled
form; they can be enabled through overlays.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
In order to enable sample to be run and evaluated in sanitycheck,
add a harness_config to validate sample output:
- Add "regex" to match on sample output
- Add "timeout" to save some time when debugging
- Add "ordered" instruction. Since sample is running a while loop
test verdict can potentially be computed on previous run output,
issuing a wrong status.
Last, since sanitycheck regex does not play well them, rework
sample to output without parenthesis.
Tested on disco_l475_iot1
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Document this behavior. This partially addresses #20708, but we'll
have to deal with driver bugs case by case now that the desired
behavior is clear.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
