The commit changes flash_map list output to display flash_map
assigned pointer instead of device ID which was not propagated
anyway.
The commit also fixes formatting of the output.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Save FP user register and FP register file during context switch.
This change enables shared FP registers mode using CONFIG_FPU_SHARING.
Since there is no lazy stacking, the FPU registers will be saved regardless
of whether floating point calculations are performed in the threads when
CONFIG_FPU_SHARING is enabled. This require 72 additional bytes in the
stack memory.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add entry for regulator drivers. Add myself as a maintainer as I've been
reworking the whole subsystem lately, and Daniel DeGrasse as a
collaborator as he's been active in reviews and implementations.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Refactor the regulator shell so that it exposes all regulator APIs
- vset/iset commands allow to specify a single value (equal min/max) or
a range
- Voltage/current input is now more user friendly, e.g. user can specify
units and decimals: 3.3v, 200mv, -4mv, etc.
- Reported values are also printed in a more user friendly way, e.g.
1800000 uV will be printed as 1.800 V.
- Added new command to list supported voltages
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Ranges with step 0, that is, multiple indices representing the same
value, need to report the count exclusively based on indices. This makes
it possible to later retrieve all values, e.g. in a group.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The voltage gets assigned by regulator_get_voltage, code was likely a
copy&paste from set voltage command.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new API to query the configured regulator mode. Updated fake
driver and API tests.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Apply initial mode (regulator-initial-mode) as part of the
regulator_common_init_enable call. Update tests to cover this change.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Check conditions that happened during device init at setup stage, so
that we can reset fakes and make tests stateless.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes: #52353
If a CMake variable is available in both local scope and as CMake cache
variable, then the use of `${<var>}` fetches the local scoped variable.
If only the cache variable is set, then things works as expected.
Ensure that the cached variable is always the variable being shared to
images by using `$CACHE{<var>}` instead.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This test to verify Watchdog install/setup/feed can work and
interrupt can be triggered on timeouts. This test doesn't test the
case of reseting the board on time out because flash isn't currently
support.
Signed-off-by: Quang Bui Trong <quang.buitrong@nxp.com>
Enable RTU.SWT (Real-Time Unit.Software Watchdog Timer) instances on
s32z270dc2_r52 boards. Module clock frequency is fixed to 48 Mhz.
Signed-off-by: Quang Bui Trong <quang.buitrong@nxp.com>
Add missing I2C clock sources for STM32F303 & F373.
Add a comment for all STM32F3 I2Cx and for STM32F0 I2C1 that the clock
source should always be defined.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
If present, get the clock value for STM32 I2C from the clock source defined
in the dts.
Otherwise, use pclk.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add support of STM32_DT_INST_DEV_DOMAIN_CLOCK_SUPPORT to condition the
configuration of an source clock for STM32 I2C.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
This commit modifies the way we define the I2C driver by using device tree
instance macros instead of node label names.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Fixes an issue with a missing variable when
CONFIG_IMG_MGMT_REJECT_DIRECT_XIP_MISMATCHED_SLOT is enabled.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The unaligned trap bit is set by default, contrary to the xmc
reference manual. This PR unsets the bit in the initialization.
It can still be set later via the CONFIG_TRAP_UNALIGNED_ACCESS
option.
Note that the same approach is used in xmc4500 reference software
init code (see SystemCoreSetup() in infineon hal module).
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Add a check to validate and limit the size of images in the repository,
setting stricter limit for files in boards/.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Git normally only works on files, but can include directories if there's
any submodule in the repository. This is currently checked in
filter_py(), move the check into get_files() so it does not have to be
copied around.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
DevicetreeBindingsCheck is missing the splitlines() call to process the
get_files() output, hence cycling through each character of the output
rather than each file, which causes the check to never run on anything.
Fix it by moving the splitline call into get_files() itself, since every
caller is going to use it anyway.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix LwM2M rd client stop call hang when Queue client is at
RX_ON_IDLE_STATE. Added miossing connection resume for
de-register functionality.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
If k_malloc() of filters fails in log_mgmt.c:link_filters_init(),
return an error and do not rely on the __ASSERT(0).
If __ASSERT_ON==0 in the build, assert will not trigger and
code will proceed to execute
memset(NULL, 0, sizeof(uint32_t) * total_cnt);
Avoid this by returning -ENOMEM on error.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Now that USB clock prescaler is done is clock_control driver.
Remove similar part in USB driver.
Note that behavior is different: it is now up to the user to provide
the proper configuration.
Add a warning during the transition period.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If sysclk is set to 72MHz, USB prescaler should be not be set in
order to achieve 48MHz USB clock.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32F1 series, configure USB(/OTGFS) prescaler based on DT.
When prescaler is set, PLL output clock is not divided.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
PlatformIO seems to not keep up with Zephyr (they don't seem to even
support 3.0), so we should not recommend it as an IDE as part of our
official docs. Also, it is frequent to see people reporting problems on
our Discord channels.
Ref. https://github.com/platformio/platform-ststm32/issues/602
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Check receiving buffer size and return error if
* buffer size is too small for opaque or string data type
* buffer size is not equal to data lenght when data type is
fixed size
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add config cell property to gd,gd32-dma.
For supporting hardware variation, Splitting base definition
to gd,gd32-dma-base.yaml.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Use dma_slot for peripheral request instead of linked_channel.
This is a more suitable usage as described in dma_config.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
