The size percentage was doing "xx.xx%" so 100% would not be
aligned correctly when printed. So add a space for percentage
printing.
Also change the coloring of "(hidden)" node so it would not
have the same color as files or symbols.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC doesn't like having quotes in the section name, so
workaround it by overriding __in_section_unique_named()
similar to __in_section_unique().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit 67d290540e.
The script is actually used to generate the _soc_inthandlers.h
file when introducing a new Xtensa SoC. So restore it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In test cases MESH/NODE/TNPT/BV-04-C and MESH/NODE/TNPT/BI-01-C
the PTS is sending incomplete Seg Ack 3 times and in some cases we run
out of retransmit attempts before PTS sends complete Seg Ack. As a
workaround, increase Segment Retransmit Count to improve stability of
these tests.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
From the OMA LwM2M Object and Resource Registry: "When the single Device
Object Instance is initiated, there is only one error code Resource
Instance whose value is equal to 0 that means no error."
This fix creates that initial error code resource instance, and makes
sure that it doesn't get deleted by the Reset Error Code resource.
Signed-off-by: Tjerand Bjornsen <tjerand.bjornsen@nordicsemi.no>
The test is using device and device runtime power management. Just
including them to the test build.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use __WFE and __SEV for CPU sleep in simulation too to
avoid stalling and to let ISRs execute during CPU sleep.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added weak function for data path dependent ISO-AL sink creation. This
is required for vendor specific ISO-AL data sink operation. Invoke sink
creation for vendor specific data path.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implemented host function for configuring vendor specific data path for
use with ISO, and fixed passing of path ID in setup.
Signed-off-by: Morten Priess <mtpr@oticon.com>
PA11 can be remapped to PA9 by using the recently introduced
remap-pa11-as-pa9 property.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32G0/F0 SoCs allow to remap PA11/12 to PA9/10. Some boards
were manually configuring this remap. This patch centralizes this
functionality to the pinmux driver, allowing boards to enable the
remap directly in board dts file.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add specific properties to enable remap for PA11/PA12, which is a
possibility on STM32G0/F0 SoCs.
These properties only have effect when defined.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provide power modes implementation for u5 socs.
For now STOP3 mode is not implemented as this mode is not
compatible with LPTIM activation and hence cannot be used
as a workable suspend to idle state using LPTIM as kernel
tick source.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When existing stop mode 1&2, VCO is set to range 4
and should be set back to range 1 to allow full speed
operations.
Rather than setting VCO at startup, set it inside clock
setting procedure so that it could done
in clock reset procedure when existing stop modes.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Enable i2c1 and i2c2 nodes on b_u585i_iot02a.
i2c1 is used as Arduino I2C
i2c2 is used as bus for HTS221 MEMS device.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This changes is an adaptation for the different boards
based on the SOC_STM32F412ZG that has been redifined
to SOC_STM32F412ZX
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A new stm32f412vx devices is introduced.
The soc devices stm32f412cx, stm32f412vx, stm32f412zx are
removed to have a more generic stm32f412xx Kconfig.
The stm32cube modules stm32f412cx/vx/zx exists.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Remove CC1200 and CC2520 devicetree nodes from the test as they are not
sensors and are not being built by this test regardless.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds build_all for ieee802154 drivers. A substantial number of drivers
are for SoC peripherals, so test cases are required many boards.
Fixes#11519.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Devices need to be resumed in the reverse order they are suspended.
e.g: devA +---> devB ---> devD
|
+---> devC
They are initialized in the following order, devA -> devB -> devC ->
devD, and suspended starting from the end of the list, devD -> devC ->
devB -> devA. When they are suspended they are temporary put in a list
that is used later to resume them.
This list has to be iterated from the end to the beginning, otherwise a
device may be resumed before its parent.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove two unused files that were left floating around when the
build_all sample was split up.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This updates Mbed TLS to 3.0 as well as trusted-firmware-m and mcuboot
to versions that also support this version.
Signed-off-by: David Brown <david.brown@linaro.org>
Mbed TLS 3.0 changes the configuration defines used to determine the
buffer size used for TLS. We were still setting the old one, which was
causing Mbed TLS to revert back to the large default buffer size. Set
both the in and out buffer sizes to match the config setting. A future
improvement may be to separate this into two configurations within the
Zephyr config.
Signed-off-by: David Brown <david.brown@linaro.org>
The psa-arch-tests project changed how third-party toolchains are
integrated. This broke the Zephyr sdk.
This patch aligns with the new mechanism.
https://github.com/ARM-software/psa-arch-tests/pull/276
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Mbed TLS 3.0 removes the definition for MBED_ERR_SSL_PEER_VERIFY_FAILED,
since non of its code ever returns that value. Since there isn't really
a perfect response, instead return a somewhat generic response
indicating this was unexpected.
Signed-off-by: David Brown <david.brown@linaro.org>
Moving to Mbed TLS 3.0 changes some of the Mbed TLS to better match the
PSA spec. Fix up the things where we are affected by these API changes.
Signed-off-by: David Brown <david.brown@linaro.org>
z_impl_sys_csrand_get is implement if the system is build with either
CONFIG_CTR_DRBG_CSPRNG_GENERATOR or CONFIG_HARDWARE_DEVICE_CS_GENERATOR.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Several fields of structures in mbedTLS 3.0 are now private. To access
them directly is necessary to define MBEDTLS_ALLOW_PRIVATE_ACCESS.
That is a temporary fix, the proper solution is not access directly
but using proper API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Apply the modifications required by the newer library version.
These modifications came from the original file in the mbedTLS
repository.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Apply the modifications required by the newer library version.
These modifications came from the original file in the mbedTLS
repository.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Render Zephyr version in both, standalone Doxygen build and Sphinx
controlled build. In standalone mode, the package version given by
find_package(Zephyr...) is used, while in Sphinx build the conf.py
version is used.
The project brief has been shortened to make project title more compact
while still containing relevant information.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
