- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The difference between low power and suspend states is a thin blur line
that is is not clear and most drivers have used indistinctly. This patch
converges to the usage of the suspend state for low power, since
contrary to the low power state, it is used by both system and runtime
device PM. The low power state is still kept, but its future is unclear
and needs some discussion.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM control function will only be called if the requested
state is different from the current one. A significant amount of drivers
were checking for state changes, now unnecessary. This patch removes all
this redundant logic.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The irq will be enabled at the condition of start or repeat
start of I2C. If timeout occurs without being wake up during
suspend(ex: interrupt is not fired), the irq should be
disabled immediately.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
In certain build cases we get the following compiler warning:
i2c_rcar.c: In function 'i2c_rcar_transfer_msg':
i2c_rcar.c:168:6: warning: 'ret' may be used uninitialized in
this function [-Wmaybe-uninitialized]
Fix this by initializing ret to 0 at start of function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Current impĺementation fails due to missing stop bit
when reading data. This fixes it and refactor the implementation
by adding k_busy_wait when waiting I2C bus completion.
Also, this implementation is based on esp-idf v3.0.
It will be refactored based on latest esp-idf v4.3 using proper
low level calls.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fixes#34015
This patch add support for I2C on the Renesas R-Car.
This I2C hardware block can be found on various Renesas R-Car
SoC series.
It allows to perfom read and write on I2C buses in an
interrupt based way on R-Car Gen3 H3ULCB board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Use GPIO output high and low to simulate I2C start and stop
conditions to restore i2c to normal.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Create the pinmux phandle to the I2C driver node in the
devicetree. When the pinmux_pin_set function in
i2c_it8xxx2_init can refer to the setting of this phandle.
It is more flexible to use.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix i2c emulated bus initialisation code to use children of specific i2c
bus DTS node instead of first i2c bus instance.
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
This change has more detail about providing the I2C peripheral
device's address to help pinpoint any issues that are device
specific and not bus specific.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Use DEVICE_DT_GET instead of device_get_binding to obtain the controller
node, so that the device address gets resolved at link time.
This means we can move the pointer form the data to the config
structure, and get rid of the data structure and associated boilerplate
entirely.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert the various device_get_binding() calls used to get the device
clock node to use DEVICE_DT_GET. The latter is processed at link time,
so it should be a bit more efficient.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The macros are used to get the pin(s) of a given driver instance. Add
_INST prefix to match convention used by the devicetree.h. The original
macros can now be used to obtain pin(s) of an arbitrary device instance
identified by the nodelabel.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If the transaction of write to read is divided into two transfers,
the second transfer will go to check bus busy and cause i2c reset.
This change adds flag to eliminate this situation.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Fix the compilation of i2c_gpio.c after the gpio_config() syscall was
removed.
Fixes: 3632815e2e
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
After i2c_reset, there is still no external pull-up I2C bus,
and finishing off the rest of loop causes the code to hang
indefinitely.
This patch fixes that if I2C bus is not available(No external
pull-up), dropping the transaction.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Previously to this commit, nothing was done to restore the bus to an
healthy level.
However, I2C devices sometimes needs help to recover from an aborted
transaction.
Therefore, we now add a call to nrfx_{twi, twim}_bus_recover().
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
nrfx 2.5.0 release includes the patch in the nrfx_twim driver that
fixes the driver behavior for zero-length transfers. No need to keep
the same fix in the shim layer.
This effectively reverts cb86a2b306.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
For a zero-length transfer, the STOP task is not triggered
automatically by the shortcut with the event that signals
the transfer end because such event is not generated.
Trigger this task "manually" to prevent the driver getting
stuck after the address byte is acknowledged.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move emul.h out of the top level include/ dir into
include/drivers/emul.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With some additional macro-magic we can remove the CMake-based header
file template feature, and instead take advantage of the usual
DT_INST_FOREACH_STATUS_OKAY() macro.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no boards that need hard-coded interrupts so just remove this
build-time conditional branch. The way going forward is that all PCIe
devices should always use PCIE_IRQ_DETECT.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
