Instead of selecting appropriate HAS_HW_NRF_* options for particular
nRF SoCs (and simulated nRF52 target), set their values basing on
information from devicetree.
Correct also semantics of those options so that they are set only when
a corresponding DT node is enabled. This allows using them directly in
Kconfig dependencies of Zephyr drivers for nRF peripherals. Update
appropriately these dependencies.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This update Atmel sam ssc driver to use pinctrl driver and API. It
updates all boards with new pinctrl groups format. In addition this
remove DEV_NAME macro at sam xdma driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Extend the macro with checks for DT properties related to pin
assignments that are defined but would be ignored, depending on
whether PINCTRL is enabled or not, what presumably indicates
a resulting configuration different from what the user expects.
Add also a possibility to indicate that the pinctrl-1 property
should not be checked because the caller does not support the
sleep state.
Rename the macro so that its name better reflects its function.
Update accordingly all drivers that use it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Re-running the script that checks for the const qualifier missing on
struct device ISR's parameter.
The script also changes the parameter 'arg' to 'dev' when relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just use dev->name. This change follow same principles applied when
DEV_CFG and DEV_DATA macros were removed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for the new pinctrl API to the nRF I2S driver. Update code
of the driver and the related devicetree binding.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Refactors the remaining I2S drivers to use the shared driver class
initialization priority configuration, CONFIG_I2S_INIT_PRIORITY, to
allow configuring I2S drivers separately from other devices. This is
similar to other driver classes.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to be
consistent with other driver classes.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Shims for nrfx drivers should only connect the related IRQ handlers,
they should not enable the IRQs, as this could lead to a situation
where the interrupt handler is called before the driver had a chance
to properly initialize the peripheral and install the provided event
handler. nrfx drivers will enable the interrupts appropriately on
their own by calling the NRFX_IRQ_ENABLE macro which is implemented
in nrfx_glue.h as a call to irq_enable().
This commit fixes the above issue spotted in the following shims:
- dmic_nrfx_pdm
- clock_control_nrf
- i2s_nrfx
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Invalidate the cache before the RX data block is passed to the DMA
engine and not after it is received. If the RX data block contains
dirty cache lines they can be flushed anytime, overwriting legitimate
data that have been prefilled by the DMA module.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Some drivers explicitely casted data/config from void * to the
corresponding type. However, this is unnecessary and, in many drivers it
has been misused to drop const qualifier (refer to previous commits).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Just minor styling changes to capitalize the first character
and removing the trailing comma on the brief doc description
on two copy functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The PINCTRL_DT_(INST_)DEFINE macros already defined the trailing ;,
making its usage inconsistent with other macros such as
DEVICE_DT_DEFINE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
some build error due to adding rt11xx support without testing
update mclk enable to avoid add pinmux driver
note:
some other PRs still in progress to full enable i2s on rt platform
this fixing: #41153
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
- correct the names of buffers used by message queues so that it
is possible to have multiple instances of the driver (in case
such need appears in the future)
- make `stop` and `discard_rx` normal structure members, not bit
fields, as they are modified in the interrupt handler and that
could lead to overwriting of other bit fields located in the
same memory unit
- add a log message providing the actual frame clock (WS) frequency
(i.e. PCM rate) that the driver was able to configure (due to
hardware limitations, it is not always possible to achieve the
exact requested frequency and the driver selects the closest one
available, so make it more visible to users
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove unnecessary condition that effectively limits the usability
of the I2S format to two channels mode only.
Although the description of the `i2s_config` structure contains
a remark that for the I2S format the specified number of channels
is ignored and always two are used, in fact only one other in-tree
driver (i2s_sam_ssc) applies such limitation.
The nRF I2S hardware has no problem with handling the I2S format
with audio data for only one channel, so there is no need for having
this limitation in the driver, and without such mode of operation of
the driver it is impossible to feed it with PCM data directly from
the PDM peripheral working in one channel mode.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
I2S direction was not checked correctly in the i2s_nrfx_configure
function.
This patch also fixes coverity issue 238365.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a shim that allows using the nrfx I2S driver via the Zephyr API.
Add also missing devicetree nodes representing the I2S peripherals
in the nRF52 Series SoCs.
Extend the "nordic,nrf-i2s" binding with a new property that allows
specifying the clock source to be used by the I2S peripheral (so that
it is possible to use HFXO for better accurracy of the peripheral clock
or, in the nRF53 Series SoCs, to use the dedicated audio oscillator).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use `dma_reload()` instead of `dma_config()` within DMA callbacks. This
significantly shortens time required to reconfigure DMA engine to
transmit / receive the next data block and allows to configure higher
I2S bus data rates.
The maximum I2S data rate supported by the driver is still lower than
that of underlying hardware. To fully support hardware capabilities the
I2S driver would have to use scatter-gather / linked-list DMA transfer.
This is currently not supported by the DMA driver.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
All the macro for dma-cells are now in the
include/drivers/dma/dma_stm32.h header file.
So the include/dt-bindings/dma/stm32_dma.h is no more
useful and removed from #include.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The macros are used to get the pin(s) of a given driver instance. Add
_INST prefix to match convention used by the devicetree.h. The original
macros can now be used to obtain pin(s) of an arbitrary device instance
identified by the nodelabel.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change to make i2s_config const missed a case in the SAM driver.
Without this we get build errors when building in CI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The i2s_config structure passed to the i2s_configure() function is
not supposed to be modified by the driver. Similarly, the structure
returned by the i2s_config_get() function is not supposed to be
modified outside the driver.
Decorate the pointers to those structures with the const qualifier
and correct one driver that actually modified the structure passed
to i2s_configure().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Introduce a new enumeration value that allows setting configuration
and triggering commands for both I2S streams simultaneously.
Such possibility is especially important on hardware where the streams
can be only enabled/disabled (but not started/stopped) independently,
like it is in nRF SoCs.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The memory block passed by the user to the i2s_write function is
tightly packed next to each other.
However for 8-bit word_size the I2S hardware expects the data
to be in 2bytes which does not match what is passed by the user.
This will be addressed in a separate PR once the zephyr API committee
finalizes on an I2S API for the user to probe hardware variations.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The DMA module the i2s_sam_ssc relies on cannot change during the
runtime. Store pointer to dev_dma in flash, not in RAM. The new
implementation saves 40 bytes of flash and 32 bytes of RAM.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There is no longer a mem_block pointer in the stream struct so the
assert NULL check isn't relevant anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
