With the introduction of privacy, the system workqueue is now being
linked into the image, growing the RAM footprint considerably.
In order for the sample to fit in QFAA and QFAB variants of the nRF51
(16KB of RAM) we reduce the workqueue stack size to 512 since the RPA
update mechanism doesn't use more than 340 bytes and we stick to 16
connections maximum.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The condition in src/Makefile is not necessary since the
net_private.h is always included from wpanusb.c and is not
dependent on the transceiver.
Change-Id: I07a0bf599f328bacb8c5677f20eb221a05f30866
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 83edd615ca.
Causes the documentation build to fail on Kconfig parsing, needs fixing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable application specific configuration to be easily included
and manageable via Kconfig. Add sample.
Signed-off-by: Michał Kruszewski <mkru@protonmail.com>
ISSM team wanted to integrate
"samples/application_development/static_lib" app
into their IDE. Al-ashi, Mahmoud <mahmoud.al-ashi@intel.com> found
it failed to "make flash" this app.
Also this patch added "make flash" build targets.
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GAP is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some files have moved from their original location, or are no longer
available. For the mbedtls samples, tweak the link to point to a page
where links for current and previous downloads can be found.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit fixes compile error caused by commit 39962dc9
"samples: use k_thread_create()"
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This https-client sample starts to send HTTP GET/HEAD/POST
requests same way as http-client, to https server that can
be found in net-tools repository.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Various network samples contained QEMU slip setup instructions
or those instructions were missing. A reference doc in
doc/subsystems/networking/qemu_setup.rst file already has the
setup instructions for QEMU. So add a reference to that file
in samples/net/*/README.rst files and remove unnecessary slip
setup instructions in relevant files.
Fix various typos in readme files at the same time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sample app "static_lib" is very important to Zephyr user, which
demonstrate how to build and link a static lib.
ISSM team wanted to integrate this app in their IDE for quark platforms.
However they find the in "static_lib/hello_world/Makefile" BOARD is
hardcoded as qemu_x86.
This patch supports other BOARD passed from build command.
I have verified this app working fine @Arduino101.
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Add clarification that the DNS server configuration must be edited in
the respective prj.conf file.
JIRA: ZEP-2040
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The STM32F412 has PWM output capabilities. Add support to the blink_led
samples.
Tested using a Nucleo STM32F412ZG board (PWM output on pin 28 of the
CN11 Morpho connector and pin 29 of the CN10 Zio connector).
Change-Id: I75fb986fa97bd1c07c6375938430e7963297cd9d
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
The STM32F413 has PWM output capabilities. Add support to the blink_led
samples.
Tested using a Nucleo STM32F413ZH board (PWM output on pin 28 of the
CN11 Morpho connector and pin 29 of the CN10 Zio connector).
Change-Id: I3b25b09cab54265b28088ac9681aec588d9d48b5
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
The number of RX and TX buffers is increased to 64 as the
earlier limit can cause memory exhaust in some cases.
Jira: ZEP-2223
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fix is basically a no-op as the rx_buf pointer cannot be null
in practice, but in order to avoid Coverity complaining about
it add some null pointer checks to the UDP handling code.
Coverity-CID: 170124
Jira: ZEP-2235
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of NULL terminated buffer arrays, let's add a parameter for each
that tells the number of spi_buf in it.
It adds a little bit more complexity in driver's side (spi_context.h)
but not on user side (bufer one has to take care of providing the NULL
pointer at the end of the array, now he requires to give the count).
This will saves a significant amount of bytes in more complex setup than
the current dumb spi driver sample.
Fix and Use size_t everywhere (spi_context.h was using u32_t).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Waiting for an NET_EVENT_IF_UP before trying to connect isn't sufficient
in some cases; for instance, on devices using the MCUX HAL, such as the
FRDM-K64F, the interface will have the NET_IF_UP flag set even though
the link negotiation didn't yet complete.
Executing this sample on such board will produce the following output.
Notice the "Enabled 100M..." message right after trying to connect.
[dev/eth_mcux] [DBG] eth_0_init: MAC 00:04:9f:6f:91:da
net_context_connect error Is the server (broker) up and running?
[publisher:247] network_setup: -60 <ERROR>
Bye! [dev/eth_mcux] [INF] eth_mcux_phy_event: Enabled 100M
full-duplex mode.
Even though the returned error is ETIMEDOUT, increasing
net_context_connect()'s timeout parameter to several seconds isn't
sufficient; other steps performed by network_setup() after the link has
been fully established are necessary. As a stopgap measure, try
connecting a few times before giving up (more than one connection
attempt should be made by application in most cases, anyway.)
It might be the case that we need events to monitor ethernet link
(re)negotation in addition to the NET_IF_UP bit.
Jira: ZEP-2036
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The state machine of the game assumes that the user needs to
explicitly re-select multiplayer game when disconnected. We need to
therefore make sure that advertising stays off as soon as the first
connection happens.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Occasionally the sound might stay enabled for the restart timeout (2
seconds) if the ball would hit the wall right before missing the
paddle. Ensure that it's disabled whenever the game ends.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
