Currently assumption is all OOB traffic over eSPI bus is always client
initiated.
Add option for systems where host can initiate OOB traffic.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This CL added more additional details for KBC (Keyboard and Mouse
Controller) bus in espi_event structure. It helps the application to
handle different 8042 events in the callback function.
The format of event data for KBC 8042 protocol is:
[23:16] - 8042 event type: 1: Input buf full, 2: Output buf empty.
[15:8] - 8042 data: 8-bit 8042 data.
[0:7] - 8042 protocol type: 0: data type, 1: command type.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add an emulation controller which routes eSPI traffic to attached
emulators depending on the selected chip(mostly host).
This allows drivers for eSPI peripherals to be tested on systems
that don't have that peripheral attached, with the emulator handling
the eSPI traffic.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Replace marco function, defined(), with IS_ENABLED() in host sub-devices
driver implementation. In this PR, we won't replace the macros which
cause -Wimplicit-function-declaration warning if related configuration
is not enabled or its type is not boolean..
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL add a new notification event, ESPI_PERIPHERAL_EC_HOST_CMD, and
two response opcodes, ECUSTOM_HOST_CMD_GET_PARAM_MEMORY and
ECUSTOM_HOST_CMD_SEND_RESULT, to connect with host command sub-system
between host and ec.
It also introduced three configurations to increase the flexibility of
ec host command settings:
1. ESPI_PERIPHERAL_HOST_CMD_DATA_PORT_NUM:
Host I/O peripheral port number for ec host command data. The default
value is 0x0200.
2. ESPI_PERIPHERAL_HOST_CMD_PARAM_PORT_NUM:
Host I/O peripheral port number for ec host command parameters. The
default value is 0x0800.
3. ESPI_NPCX_PERIPHERAL_HOST_CMD_PARAM_SIZE:
Host I/O peripheral port size for ec host command in npcx series. The
valid value in npcx ec series for this option is
8/16/32/64/128/256/512/1024/2048/4096 bytes. The default value is 256
bytes.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL introduces two kinds of op codes for espi_api_lpc_read_request
and espi_api_lpc_write_request Zephyr espi api functions.
One is for supporting ACPI and shared memory region to access ACPI data.
The other is customized for certain platforms such as Chromebook and so
on.
This CL also introduced the following configurations to add the
flexibility of these settings.
1. ESPI_PERIPHERAL_ACPI_SHM_REGION_PORT_NUM:
Host I/O peripheral port number for shared memory region. The default
value is default 0x0900
2. ESPI_NPCX_PERIPHERAL_ACPI_SHD_MEM_SIZE:
Host I/O peripheral port size for shared memory in npcx series.
Please notice the valid value in npcx ec series for this option is
8/16/32/64/128/256/512/1024/2048/4096 bytes. The default value is 256
bytes.
This CL also turn off hardware-wire feature which generates VW events
that connected to hardware signals such as SMI and SCI. We will set
VW output events directly via espi_api_send_vwire() api function.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Convert espi drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to prevent user turns on the pin-mux of devices has io-pads
unexpectedly, this CL added a new device definition for host uart
device. The pin-mux of host uart interface is enabled only if we set its
status as "okay" in dts file of board folder.
The following npcx7 drivers will meet:
1. Default status property of npcx devices with io-pads such as espi,
pwm, uart, host uart and so on should be "disabled".
2. Switch pin-mux by changing status property to "okay" in dts file of
board folder.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL replaces all DT_ prefix with NPCX_DT_ for all macros used
for providing npcx device information in soc_dt.h It avoided the
ambiguity with the DT_ prefix for system DT macros/defines.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
When MEC15xx boots in MAFS, ROM bootloader performs activity over
eSPI flash channel prior to FW is loaded.
Need to clear STS_DONE during early eSPI driver initialization,
before enabling interrupts to avoid unexpected ISRs in FW.
Otherwise this would cause flash_lock semaphore to be incremented
due to ROM activity and result in FW's first espi flash request
to return immediately even before eSPI bus transaction completes.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This CL fixed the wrong comparison during searching the vw signal
that issued interrupt from MIWU in espi_vw_generic_isr().
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This CL adds more comments for each macro functions used for device tree
file for better explanations. It also changes all hex values in soc.c to
lower case.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This CL contains the drivers of NPCX Host Sub-Modules that serve as an
interface between the Host and Core domains. For most of them, the Host
can configure these modules via eSPI(Peripheral Channel)/LPC by
accessing 'Configuration and Control register Set' which IO base address
is 0x4E as default. And the interrupts in core domain help handling any
events from host side.
In this commit, we introduced six host sub-modules. It includes:
1. Keyboard and Mouse Controller (KBC) interface.
2. Power Management (PM) channels.
3. Shared Memory mechanism (SHM).
4. Core Access to Host Modules (C2H).
5. Mobile System Wake-Up functions (MSWC).
6. Serial Port (Legacy UART)
The tasks in application layer such as 8042, ACPI and host command can
cooperation with this driver by connecting api or callback functions.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
In npcx7 series, all of them support the Intel Enhanced Serial
Peripheral Interface (eSPI) Revision 1.0. This specification provides a
path for migrating host sub-devices via LPC to a lower pin count, higher
bandwidth bus. In addition to Host communication via the peripheral
channel, it provides virtual wires support, out-of-band communication,
and device mastering option over the Chipset SPI flash.
Becisdes introducing eSPI device in npcx7, this CL also includes:
1. Add eSPI device tree declarations.
2. Add npcx7-espi-vws-map.dtsi to present the relationship between eSPI
Virtual-Wire signals, eSPI registers, and wake-up input sources.
3. Zephyr eSPI api implementation.
4, Add OOB (Out of Band tunneled SMBus) support.
5. Add configuration files for eSPI test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Fixed build error in in eSPI socketpair test suite since wrong function
name for eSPI flash channel api.
This CL also fixed [-Werror=unused-function] warning by adding inline
attribute in case someone includes "espi_utils.h" and doesn't call
espi_manage_callback() function.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add Kconfig switch to disable automatic eSPI slave boot acknowledge.
This allows to perform lenghty operations before continue any eSPI
handshake with eSPI master.
Required for eSPI SAF boot configuration.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Fix incorrect register update that results in unintentionally
in default eSPI frequency (20MHz) whenver IO mode is changed.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
eSPI slave driver should only indicate that a channel is ready
after the eSPI master has enabled said channel.
However, this indication is incorrectly sent during eSPI reset
even before channel renegotiation starts.
Perform only channel-specific interrupts enabling inside
initialization functions.
Send Channel ready ack only after channel negotiation is received.
Add missing callbacks for channel events to notify client driver.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This enables the ACPI_EC1 interface which is typically accessed
through ports 0x6A0 and 0x6A4 in Bios.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Espi has three uart port from 0 to 2 and uart sirq need to enabled for
the port which is active in the hardware. An active uart sirq shoudl be
enabled based on uart mapping configuration.
Signed-off-by: Venkataramana Kotakonda <venkataramana.kotakonda@intel.com>
MCHP Soc operation uses clear-on-write register for interrupt
status, read-OR-write operation may clear interrupts unintentional.
Fixes#24464
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Espi bus interrupts need to re-enable after espi reset to get
all espi bus and vw signal interrupts.
Signed-off-by: Venkataramana Kotakonda <venkataramana.kotakonda@intel.com>
Epsi slave need to respond with an OOB_RST_ACK for OOB_RST_WARN sent by
master during host reset. Enable interrupt for OOB_RST_WARN to receive
signal changes and respond with ACK.
Signed-off-by: Venkataramana Kotakonda <venkataramana.kotakonda@intel.com>
Several functions that are syscalls were passing structs by value
instead of by reference. Just changed that and implemented missing
verfication handlers for them.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add verification handlers for some syscalls that are just missing
that. Though there are syscalls still missing that but they need to be
fixed before adding verification handlers.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Convert older DT_INST_ macro use in microchip drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Expand configuration mechanism for additional eSPI host warnings.
Notify client driver when sleep A virtual wire is received.
Simplify virtual wire interrupt enabling.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
MEC15xx eSPI OOB RX length register holds received message length
and receive buffer length, need to extract rcvd msg length.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Convert driver to use DT_INST_ defines. The preferred defines for
drivers are DT_INST_. The driver mostly used DT_INST_ defines but
a few IRQ priority defines needed conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix#22188
Introduce config option to disable automatic acknowledge via
virtual wires on response to eSPI host suspend and reset warnings.
This will give the opportunity for eSPI slave systems that need to
perform preparations before reset or suspend.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
