Conditionally compile the legacy control procedure defined
control Tx buffers that is not required in the new control
procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Zephyr doesn't seem to allow on adding route to the device from
which it received Router Advertisement without SLLAO field set
(in particular device that doesn't include Link Layer address).
Changes done:
* Added creating new NBR without Link Layer address set on RA
reception (LL is added only if SLLAO option is set, otherwise
NBR doesn't have LL address, but exists in the table and has
valid IPv6 link local address).
* Removed two asserts preventing from adding route to the NBR
that doesn't have Link Layer address set.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Extend SenML-JSON content format for handle cached data
timestamp API for basetime and timestamp label's.
Added support for write historical data for static resource
size's: Float (v) and Boolean (vb).
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Added support for historical data encode by adding base time (bt)
and time (t) label. New labels are needed for Encoder so Decoder
is not regenerated.
Added support for SenML-CBOR to write time series data.
Use "bt" base time and "t" timestamp labels for data cache.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
New API for enable Historical data storage for LwM2M resource.
Data cache is only supported at resource which resource size is
static and well known.
Extend output writer for write cached data timestamp.
Enable cache support for Resource set and Read operation.
Added possibility for for drop latest or oldest data from cache.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When moving nodelabels to <device_name>_<shields_name>, '-' included
in <device_name> was then introduced in the device nodelabel.
But '-' isn't an allowed nodelabel character, hence this is breaking
compilation with those shields.
Convert '-' to '_'.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit introduces a zephyr thread for SDL events. This allows
to use zephyr mutex locking with SDL callbacks.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The codec->path_id supplied to the capabilities
were not being used for the endpoint codec.
Important note: This only works if there is a single
capability per codec ID per direction. This limitation
is also an existing limitation in the current
implementation of capabilities.c.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The iodev submission queue existed but wasn't easily constructed as
there was no macro to define it.
Adds a simple macro wrapper around RTIO_SPSC_DEFINE for creating
the RTIO IO Device Submission Queue enabling each IO device to
have its own pending queue of requests.
The sample has been updated to use the iodev submission queue rather
than a k_msgq.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Fixed an issue with syncing to multiple BIS as the broadcast
sink in the shell. Also changed a check in the broadcast
sink implementation from an assert to a `if` to provide
a better way of handling bad input.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add Intel dmic dai dts definitions for ace15, cavs15 and cavs25
platforms.
Add also pre dts cmake files as the dmic nodes use same address and emit
warnings otherwise.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Use fifo address from device tree to create the device structs.
Also modify shim initialization as it was changed from array to
int. Fix cosmetic tab in device init macro.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Add a fifo address as int value into dmic yaml to separate different
outputs (corresponds to different dais) from the same hw block. Also
change shim address from array to int value.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Adds support for handling fragmented advertising data over HCI when
CONFIG_BT_CTLR_ADV_AUX_PDU_LINK is not enabled
- Added support for appending advertising data to ull_adv_aux_hdr_set_clear
and ull_adv_aux_pdu_set_clear via ULL_ADV_PDU_HDR_FIELD_AD_DATA_APPEND
- Updated ll_adv_aux_ad_data_set and ll_adv_aux_sr_data_set to
handle fragmentation ops without CONFIG_BT_CTLR_ADV_AUX_PDU_LINK
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add successive inclusion for STM32F072 dts by including
STM32F070 dts instead of STM32F0 dts.
This allows to reuse the definition of
- Flash
- SPI
- USB
from the new parent.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Shield's nodelabels should now be in the form <device>_<shield_name>.
Besides changing the nodes nodelabels, their usages should be fixed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This is leftover from old PMP support that should have been deleted
in commit 554f24661f ("riscv: pmp: remove previous implementation").
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Gives the application a two way mapping between array index
and a per_adv_sync object instead of current only per_adv_sync
obj -> index using bt_le_per_adv_sync_get_index.
Signed-off-by: Jakob Krantz <jakob.krantz@u-blox.com>
The test requires external memory connected but it was not
reflected in the yaml decription. Therefore, the test was failing
instead of being skipped. It is the same story as with #47241
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Previously, the I2C bus would have an extended idle period on write
operations, and a spurious trailing byte on read operations (after a
final NACK).
This patch relocates the issuance of the stop condition from the driving
thread's context, into the ISR.
Thanks to @benediktibk for discovery and initial patch.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Update fff.h to the pending PR upstream which allows for using a custom
function signature. This enables the use of C++ std::function as the
mock.
Signed-off-by: Yuval Peress <peress@google.com>
I've update FFF to run tests in the native CI for GitHub, so we no
longer need to run these extra tests. Remove the fff module from
west.yml since the module was only used in the CI and the header
was directly included in the Zephyr tree.
See https://github.com/zephyrproject-rtos/fff/pull/2
Signed-off-by: Yuval Peress <peress@google.com>
Add test to verify mcuboot support. This test is only enabled for specific
platforms, since it it not possible to filter for mcuboot support.
Sysbuild support is required to flash multiple samples using twister.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add sysbuild flag to twister supported options, with documentation on
how Kconfig and devicetree will be parsed
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for building with sysbuild using twister, via the "sysbuild"
yaml property in testsuites. This will currently disable Kconfig and
devicetree filtering.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move the _static_thread_data created by K_THREAD_DEFINE to ROM. This
change also deletes the unused .init_abort field from the static
thread data.
Signed-off-by: Keith Short <keithshort@google.com>
Add an entry for the release notes files so that release notes PRs get
tagged as "Release Notes", that should make them easier to manage close
to release time.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The log refers to Platform taking precedence but the loop handles
Documentation as well. Move it under the proper section, drop "Drivers"
as that is not handle in any special way.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The script right now assumes that all the areas have a maintainer and
that the second area in particular has one in case of Documentation,
that results in a ValueError when it's not the case. Handle that by
checking the lists before using them.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When an application is waiting on a completion it may be expecting,
rightfully so, that a new submissions slot is available.
Frees the submission queue event prior to enqueuing
the completion queue event in the simple executor.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
espi_manage_callback() returns -EINVAL if it could not remove
callback. However if the list is empty success is returned when trying
to remove callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
gpio_manage_callback() returns -EINVAL if it could not remove
callback. However if the list is empty success is returned when trying
to remove callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Show function names for all BT_xx logging levels when BT_DEBUG_LOG is
enabled. This makes it easier to find the problematic lines.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
- Downgrade the warning emitted when we run out of channels.
- Only log a warning when failing to establish channels and the error is
not -ENOMEM.
- Add a debug log message in that case to hint what might've happened.
This should make it less confusing to the average user not aware of the
stack internals.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This is a scary-looking warning for users, and should only really matter to
stack developers. It will eventually show up in the wild for embedded
devices that don't get updated to the latest and greatest.
Reword it to make it clear we are rejecting it, and it doesn't impact the
stack in any way.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This makes it more user-friendly, in case no failed cb has been
registered so this error is printed out of context.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Reword the scary-looking `bt_hci_core; Malformed data` warning to show
where it is originating from.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This fixes GTBS index used in API. The index that is exposed to the
application is 255 in case of GTBS.
The code has been reworked to remove redundant booleans and index that
was kept inside instance.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
