Currently, each SoC has its own CMakeLists.txt file
to handle esp32 runner.
This PR merged it all in a common file and fixes
missing configuration such as flashing frequency,
mode and size.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Removes the VDDSDIO control during boot for some SoCs.
Only ESP32 allows managing such configuration during
initialization.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update to support APP_CPU flash access.
- fix the map_rom_segment so it can be used in other context
- add IROM and DROM region size in Kconfig
- update the memory.h by using dts records
- fix the appcpu ld file to support flash
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Update and enable Wi-Fi/Bluetooth software coexistence management.
This improves package handling and is recommended to be used
in high traffic scenarios.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Remove ESP heap from the sources. System heap is default heap.
Use heap adapter layer to configure used heap.
Use MEM_POOL memory request config to Wi-Fi and Bluetooth drivers.
Update the Wi-Fi and BLE memory needs.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Makes the esp_console_init() calling during hardware initialization
conditioned to CONFIG_ESP_CONSOLE
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Add SPIRAM noinit output sections on related targets so the user can
allocate variables with macros EXT_RAM_BSS_ATTR and EXT_RAM_NOINIT_ATTR.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add new fields to the `esp_image_load_header_t`
* provide IROM and DROM fields to fix debugging features
* extend the header to up to 96 Bytes for future use
Signed-off-by: Marek Matej <marek.matej@espressif.com>
This PR includes changes in all Espressif's SoCs to enable
keeping data in RTC memory after deep-sleep.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Mostly a revert of commit b1def7145f ("arch: deprecate `_current`").
This commit was part of PR #80716 whose initial purpose was about providing
an architecture specific optimization for _current. The actual deprecation
was sneaked in later on without proper discussion.
The Zephyr core always used _current before and that was fine. It is quite
prevalent as well and the alternative is proving rather verbose.
Furthermore, as a concept, the "current thread" is not something that is
necessarily architecture specific. Therefore the primary abstraction
should not carry the arch_ prefix.
Hence this revert.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Build is failing due to wrong calls to appcpu
stall and clock gating. This fixes it
by using proper registers.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Updates for AMP targets
- use common AMP Kconfig
- update APPCPU linker script
- place AMP common area in the reserved space
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Multiple AMP related updates:
- use common AMP Kconfig
- rework the APPCPU linker script
- use MCUboot image format for APPCPU image
- fix multi-processing startup code
Signed-off-by: Marek Matej <marek.matej@espressif.com>
smp_log usage should be only used when SMP is enabled.
This is currently causing build issues after the fix
provided by #82377
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Replaces hard-coded memory addresses and sizes with macros that retrieve
such values from the device tree.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
This definition is deleted in the follwoing commit;
8233b70
as a part of "cleanup", however this definition is
used by smp_log
Signed-off-by: Arif Balik <arifbalik@outlook.com>
Fixes a wrong placement of a Kconfig which was put into the
wrong file and was bleeding through to every board
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Introduce `CONFIG_RISCV_GP_PURPOSE` choice to make sure that only
one of `CONFIG_RISCV_GP` or `CONFIG_RISCV_CURRENT_VIA_GP` can be
enabled, instead of relying of dependencies.
To do that, introduce a new
`CONFIG_RISCV_SOC_HAS_GP_RELATIVE_ADDRESSING` that can be selected
by SoC when it implemented global pointer (GP) initialization for
relative addressing in its linker.
`CONFIG_RISCV_GP` will be the default choice when
`CONFIG_RISCV_SOC_HAS_GP_RELATIVE_ADDRESSING=y`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
FH4X SoC type contains improvements in ROM code that
can save up to 35kB of memory.
Update hal_espressif in order to select proper linker
file based on upon SoC model.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
`_current` is now functionally equals to `arch_curr_thread()`, remove
its usage in-tree and deprecate it instead of removing it outright,
as it has been with us since forever.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Split the cached area and assign both parts IROM and DROM meaning. This
is necessary to overcome the esptool section merging issues.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Fix missing input/output enable flags on pinctrl macro, which
wouldn't allow for driver to see and apply flags configuration
made in the device tree.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Updates and fixes to support APPCPU.
- fix ld scripts
- fix and update memory layout
- fix build issues
- fix sysbuild
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Larger image partitions require more space in DRAM due to
the increase in .bss.sector_buffers.
Each sector in .bss.sector_buffers consumes 16 bytes.
In the worst case scenario, such as with the ESP32S3 N32R8V,
which has 32 MB of flash and most likely 12 MB image partition,
an addition of 0xc000 should be sufficient to accommodate this.
Signed-off-by: Nik Schewtschuk <nikita.schewtschuk@smartmechatronics.de>
- Update GDMA and ADC drivers and remove deprecated entries.
- Rebased hal_espressif to latest bump sync.
- Added ESP Timer and Radio common config values
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Make sure all kconfig related to Wi-Fi is
in its driver area.
This commit also removes esp_timer_init() call
from Wi-Fi driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
