Select TRIGGER_GLOBAL_THREAD by default if rtio streaming is enabled,
and TRIGGER_NONE otherwise. This change prevents bad trigger configurations
like
CONFIG_LSM6DSV16X_TRIGGER=y
CONFIG_LSM6DSV16X_TRIGGER_NONE=y
which does not have any sense.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
From the API documentation, `dma_api_chan_filter`` can be given a value
of NULL for `filter_param`. Match the behaviour of most implementations,
and return true. This removes misleading error messages logged during
tests (e.g. `test_tst_dma0_m2m_loop`).
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
No in-tree board uses this driver's pinctrl functionality, and every
RP2040-based board was configuring this to be an empty node in the
device tree, so remove them.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
RESETS_RESET_PLL_USB_BITS was logically or'd twice and 'unreset'ting
PWM doesn't seem to be required, based on the contents of the SDK.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Commit e63c6cd534 introduced device API
macros to be used by driver implementations. The DEVICE_API macro
ensures the passed API instance is placed in the corresponding iterable
section to allow for runtime checks.
Add wrapper DEVICE_API macro to all its_driver_api instances.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit is to enable Ethernet drivers support on Renesas RA
MCU, first target support is the Renesas RA8 series
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
The ICS1894 phy AN_COMPLETE bit is latched high, this make the
BMSR first read return incorrect status of the AN state, update
one more BMSR read to ensure all latched bit is clear and BMSR
return actual status of the phy chip
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Add support for mdio driver for Renesas RA MCU series
This support utilize the r_ether_phy driver in hal renesas
to support mdio write and read function
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Add support for GPIO controller feature of AW9523B.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Add watchdog driver for npm2100 pmic.
This pmic has one timer that can be used for multiple functions,
including a watchdog that can reset or power-cycle connected devices.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Add sensor driver for npm2100 pmic.
This pmic performs measurements of battery voltage, regulator voltage
and die temperature.
Configurable pmic attributes are also organized under this driver.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Add regulator driver for npm2100 pmic.
This pmic has one boost and one ldo regulator.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Add mfd driver for the npm2100 pmic device.
The driver contains basic initialization routines,
and functionality not covered by other device driver APIs.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
The _nxp_enet_dma_buffer_section is configured to __nocache area.
That makes the RxPkt performance very low (<= 50Mbps). By defining
it to the cacheable area, the RxPkt performance is >10x better.
Example with Zperf:
DUT command - zperf udp download 5001
PC command - iperf -u -c 192.0.2.1 -p 5001 -b 800M
Signed-off-by: Shrek Wang <shrek.wang@nxp.com>
The nrf wifi drivers include code related to qspi/spi bus. This work
moves bus related files to a new nrf70 bus library which is now
independent of the core driver and facilitlates building applications
directly using the bus APIs, agnostic to enabling wifi configs.
Signed-off-by: Bansidhar P.M <bansidhar.mangalwedhekar@nordicsemi.no>
The implementation of can_mcan_start() function
hides retun code of underlying function.
It makes root-cause search more difficult.
This change strives fro transparent error code
propagation to higher software layers.
Signed-off-by: Alexander Kozhinov <ak.alexander.kozhinov@gmail.com>
Commit add `modcarrier` shell command for Openthread diagnostic mode.
Command can transmit modulated carrier out of device for test purposes.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Add support for setting the sample frequency via `attr_set` and the
output data rate from device tree source.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
IT8801 support GPIO alternate function switching.
Some GPIO pins can be switched as KSO or PWM function.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The IT8801 is an I/O expander that provides GPIO, PWM, Keyboard
functions via the I2C bus.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Rename "nxp,kinetis-adc12" compatible to "nxp,adc12" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Change running baudrate from `115200` from `3000000`.
Implement the function `bt_h4_vnd_setup` to update the HCI bandrate.
Add Kconfig `BT_H4_NXP_CTLR_WAIT_TIME_AFTER_BAUDRATE_UPDATE` to set
the waiting time after the controller bandrate HCI vendor specific
command sent. It is used to ensure the controller is ready to update
HCI bandrate.
Select `BT_HCI_SETUP` if `BT_H4_NXP_CTLR` is enabled.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
