drivers: watchdog: npm2100: Add driver for npm2100 pmic
Add watchdog driver for npm2100 pmic. This pmic has one timer that can be used for multiple functions, including a watchdog that can reset or power-cycle connected devices. Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
This commit is contained in:
parent
439d3b2973
commit
66ccc2e241
6 changed files with 185 additions and 0 deletions
|
@ -26,6 +26,7 @@ zephyr_library_sources_ifdef(CONFIG_WDT_MCUX_WDOG32 wdt_mcux_wdog32.c)
|
|||
zephyr_library_sources_ifdef(CONFIG_WDT_MCUX_WWDT wdt_mcux_wwdt.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_WDT_NPCX wdt_npcx.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_WDT_NPM1300 wdt_npm1300.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_WDT_NPM2100 wdt_npm2100.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_WDT_NPM6001 wdt_npm6001.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_WDT_NRFX wdt_nrfx.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_WDT_RPI_PICO wdt_rpi_pico.c)
|
||||
|
|
|
@ -96,6 +96,8 @@ source "drivers/watchdog/Kconfig.gd32"
|
|||
|
||||
source "drivers/watchdog/Kconfig.npm1300"
|
||||
|
||||
source "drivers/watchdog/Kconfig.npm2100"
|
||||
|
||||
source "drivers/watchdog/Kconfig.npm6001"
|
||||
|
||||
source "drivers/watchdog/Kconfig.nxp_s32"
|
||||
|
|
19
drivers/watchdog/Kconfig.npm2100
Normal file
19
drivers/watchdog/Kconfig.npm2100
Normal file
|
@ -0,0 +1,19 @@
|
|||
# Copyright (c) 2024 Nordic Semiconductor ASA
|
||||
# SPDX-License-Identifier: Apache-2.0
|
||||
|
||||
config WDT_NPM2100
|
||||
bool "nPM2100 Watchdog driver"
|
||||
default y
|
||||
depends on DT_HAS_NORDIC_NPM2100_WDT_ENABLED
|
||||
select I2C
|
||||
select MFD
|
||||
help
|
||||
Enable nPM2100 Watchdog driver
|
||||
|
||||
config WDT_NPM2100_INIT_PRIORITY
|
||||
int "nPM2100 Watchdog driver initialization priority"
|
||||
depends on WDT_NPM2100
|
||||
default 85
|
||||
help
|
||||
Initialization priority for the nPM2100 Watchdog driver.
|
||||
It must be greater than GPIO_NPM2100_INIT_PRIORITY.
|
146
drivers/watchdog/wdt_npm2100.c
Normal file
146
drivers/watchdog/wdt_npm2100.c
Normal file
|
@ -0,0 +1,146 @@
|
|||
/*
|
||||
* Copyright (c) 2024 Nordic Semiconductor ASA
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#define DT_DRV_COMPAT nordic_npm2100_wdt
|
||||
|
||||
#include <errno.h>
|
||||
|
||||
#include <zephyr/kernel.h>
|
||||
#include <zephyr/drivers/i2c.h>
|
||||
#include <zephyr/drivers/watchdog.h>
|
||||
#include <zephyr/drivers/mfd/npm2100.h>
|
||||
|
||||
#define TIMER_TASKS_START 0xB0U
|
||||
#define TIMER_TASKS_STOP 0xB1U
|
||||
#define TIMER_TASKS_KICK 0xB2U
|
||||
#define TIMER_CONFIG 0xB3U
|
||||
#define TIMER_TARGET_HI 0xB4U
|
||||
#define TIMER_TARGET_MID 0xB5U
|
||||
#define TIMER_TARGET_LO 0xB6U
|
||||
#define TIMER_STATUS 0xB7U
|
||||
#define TIMER_BOOT_MON 0xB8U
|
||||
|
||||
struct wdt_npm2100_config {
|
||||
const struct device *mfd;
|
||||
struct i2c_dt_spec i2c;
|
||||
};
|
||||
|
||||
struct wdt_npm2100_data {
|
||||
bool timeout_valid;
|
||||
};
|
||||
|
||||
static int wdt_npm2100_setup(const struct device *dev, uint8_t options)
|
||||
{
|
||||
const struct wdt_npm2100_config *config = dev->config;
|
||||
struct wdt_npm2100_data *data = dev->data;
|
||||
|
||||
if (!data->timeout_valid) {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return mfd_npm2100_start_timer(config->mfd);
|
||||
}
|
||||
|
||||
static int wdt_npm2100_disable(const struct device *dev)
|
||||
{
|
||||
const struct wdt_npm2100_config *config = dev->config;
|
||||
struct wdt_npm2100_data *data = dev->data;
|
||||
int ret;
|
||||
|
||||
ret = i2c_reg_write_byte_dt(&config->i2c, TIMER_TASKS_STOP, 1U);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
||||
data->timeout_valid = false;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int wdt_npm2100_install_timeout(const struct device *dev,
|
||||
const struct wdt_timeout_cfg *timeout)
|
||||
{
|
||||
const struct wdt_npm2100_config *config = dev->config;
|
||||
struct wdt_npm2100_data *data = dev->data;
|
||||
uint8_t mode;
|
||||
int ret;
|
||||
|
||||
if (data->timeout_valid) {
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
if (timeout->window.min != 0U) {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
switch (timeout->flags & WDT_FLAG_RESET_MASK) {
|
||||
case WDT_FLAG_RESET_NONE:
|
||||
/* Watchdog expiry causes event only, and does not reset */
|
||||
mode = NPM2100_TIMER_MODE_GENERAL_PURPOSE;
|
||||
break;
|
||||
case WDT_FLAG_RESET_CPU_CORE:
|
||||
/* Watchdog expiry asserts reset output */
|
||||
mode = NPM2100_TIMER_MODE_WDT_RESET;
|
||||
break;
|
||||
case WDT_FLAG_RESET_SOC:
|
||||
/* Watchdog expiry causes full power cycle */
|
||||
mode = NPM2100_TIMER_MODE_WDT_POWER_CYCLE;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = mfd_npm2100_set_timer(config->mfd, timeout->window.max, mode);
|
||||
if (ret < 0) {
|
||||
return ret;
|
||||
}
|
||||
|
||||
data->timeout_valid = true;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int wdt_npm2100_feed(const struct device *dev, int channel_id)
|
||||
{
|
||||
const struct wdt_npm2100_config *config = dev->config;
|
||||
|
||||
if (channel_id != 0) {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return i2c_reg_write_byte_dt(&config->i2c, TIMER_TASKS_KICK, 1U);
|
||||
}
|
||||
|
||||
static DEVICE_API(wdt, wdt_npm2100_api) = {
|
||||
.setup = wdt_npm2100_setup,
|
||||
.disable = wdt_npm2100_disable,
|
||||
.install_timeout = wdt_npm2100_install_timeout,
|
||||
.feed = wdt_npm2100_feed,
|
||||
};
|
||||
|
||||
static int wdt_npm2100_init(const struct device *dev)
|
||||
{
|
||||
const struct wdt_npm2100_config *config = dev->config;
|
||||
|
||||
if (!i2c_is_ready_dt(&config->i2c)) {
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Disable boot monitor */
|
||||
return wdt_npm2100_disable(dev);
|
||||
}
|
||||
|
||||
#define WDT_NPM2100_DEFINE(n) \
|
||||
static struct wdt_npm2100_data data##n; \
|
||||
\
|
||||
static const struct wdt_npm2100_config config##n = { \
|
||||
.mfd = DEVICE_DT_GET(DT_INST_PARENT(n)), \
|
||||
.i2c = I2C_DT_SPEC_GET(DT_INST_PARENT(n)), \
|
||||
}; \
|
||||
\
|
||||
DEVICE_DT_INST_DEFINE(n, &wdt_npm2100_init, NULL, &data##n, &config##n, POST_KERNEL, \
|
||||
CONFIG_WDT_NPM2100_INIT_PRIORITY, &wdt_npm2100_api);
|
||||
|
||||
DT_INST_FOREACH_STATUS_OKAY(WDT_NPM2100_DEFINE)
|
8
dts/bindings/watchdog/nordic,npm2100-wdt.yaml
Normal file
8
dts/bindings/watchdog/nordic,npm2100-wdt.yaml
Normal file
|
@ -0,0 +1,8 @@
|
|||
# Copyright (c) 2024 Nordic Semiconductor ASA
|
||||
# SPDX-License-Identifier: Apache-2.0
|
||||
|
||||
description: nPM2100 Watchdog
|
||||
|
||||
compatible: "nordic,npm2100-wdt"
|
||||
|
||||
include: base.yaml
|
|
@ -32,6 +32,15 @@
|
|||
compatible = "nordic,npm6001-wdt";
|
||||
};
|
||||
};
|
||||
|
||||
npm2100_pmic: pmic@1 {
|
||||
compatible = "nordic,npm2100";
|
||||
reg = <0x1>;
|
||||
|
||||
npm2100_wdt: watchdog {
|
||||
compatible = "nordic,npm2100-wdt";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
Loading…
Add table
Add a link
Reference in a new issue