This adds an overlay DT & config to enable the PSA Crypto Random entropy
driver to get random bytes from TFM.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This adds an overlay DT & config to enable the PSA Crypto Random entropy
driver to get random bytes from TFM.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This adds an entropy driver calling the PSA Crypto psa_generate_random()
API to get random bytes.
Currently this only uses the TFM provided psa_generate_random().
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add devicetree binding for the PSA Crypto Random source.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Move runtime checks to use arch_num_cpus(). This is to allow runtime
determination of the number of CPUs in the future.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The whole set of architecture flags must be specified together as
they might not make sense in isolation, e.g. -mfloat-abi=hard requires
a -mcpu value that might have an FPU. Use the NO_SPLIT feature to
bind all of the linker options together so that the linker can
compute the correct linker paths for toolchain-provided libraries like
libc and libgcc.
Signed-off-by: Keith Packard <keithp@keithp.com>
Prints when traffic is ongoing cost a few Mbps due to writing to UART as
observed by the profiler, so, disable them by default.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
if compiler option -Wextra and -Werror is enabled the compilation
fails due to ignored-qualifiers warning.
The 'const' qualifier on return type has no effect.
Signed-off-by: Christoph Schnetzler <christoph.schnetzler@husqvarnagroup.com>
This commit prevents the assertion error added in the previous commit,
by introducing the following behavior.
When the Host detects that a pairing procedue would result in more than
one local identity having a bond with the same remote address, it will
try to abort the pairing. If the pairing procedure cannot be properly
aborted, it will remove the pairing locally and disconnect.
This commit also introduces a new kconfig `BT_ID_UNPAIR_MATCHING_BONDS`.
This config changes the above-described behavior to instead un-pair the
old bond and continue with the pairing (if the new bond has the same or
better security.)
The new kconfig is not enabled by default. See the help text of the new
kconfig option for more details.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This change prevents two local identities from having bonds to the same
device.
The Core specification is not well suited for Zephyr's multiple-local-
identities feature. The HCI specification seems written with intent that
a controller is used for only one GAP device. A GAP device has at most
one public address, and at most one random static address.
The Zephyr Bluetooth API, on the other hand, has a concept of local
identities. This feature allows the Zephyr Bluetooth stack to
simulatainously assume multiple local addresses. This does not mesh well
with the above intent in the specification.
In particular, the HCI specification for the resolve list does not allow
more than one entry for a remote address. The controller will deny any
attempts at doing this.
The current implementation of the Zephyr host will try the above and be
denied. But there is no handling for this situation and the host ends up
in a confused state. Some parts of the system are ok with the two bonds,
but other parts assume this situation never occurs behave badly.
The result is that the host confuses the multiple bonds to the same
device. Symtoms include:
- Directed advertisements have a different source address than what the
host intended, in which case the two sides are confused about the
address of the Zephyr advertiser, and as a result LTKs will not match.
- Errors in the log.
This commit simply asserts. This is not a solution, just a placeholder
for a fix. The next commit will implement a strategy for handling this
situation instead of failing this assert.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Refactors all sensor drivers to use SENSOR_DEVICE_DT_INST_DEFINE, which
is a sensor-specific variant of DEVICE_DT_INST_DEFINE that provides a
common place to instantiate additional data structures for the future
sensor subsystem and/or sensor driver stats.
This approach was inspired by I2C_DEVICE_DT_INST_DEFINE to streamline
adding I2C stats support across all I2C drivers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Removes alwa-nordic from the following paths:
/tests/bluetooth/bsim_bt/bsim_test_mesh/
/tests/bluetooth/mesh_shell/
This is done by adding new definitions for those paths, inheriting the
owners of the previously matching rule, but without alwa-nordic.
PavelVPV is added to both entries.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Section numbers do not match between v1.0 and v.1.1 so refer only to
those by their names which stay the same.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Check if __STDC_VERSION__ is defined before referencing it. This will
prevent a compilation failure when __STDC_VERSION__ is not defined for
any reason.
Signed-off-by: Rob Barnes <robbarnes@google.com>
New filter "TOOLCHAIN_HAS_NEWLIB == 1" was applied
because of following chain of dependencies:
LOG_MIPI_SYST_ENABLE=y --> CONFIG_MIPI_SYST_LIB --> \
--> REQUIRES_FULL_LIBC --> NEWLIB_LIBC.
Not all compillers announced in Zephyr support NewLib.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
This commit adds missing binding file for the ite,it8xxx2-usbpd.
Without this file, the DT_HAS_*_ENABLED macro wasn't defined and
couldn't be used in the Kconfigs.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
in some builds there is need to pass different value for -i parameter
and current code will override it to 3
Also in rimage i parameter is by default set to 3
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
These tests turn on mbedtls and require ajusting min flash
requirements to prevent twister from trying to build them on
platforms without required amount of flash.
Fixes: #51421
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This check makes no sense outside of the upstream zephyr CI and
causes downstream CIs, which are forked from the upstream, to fail.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Only enable the TF-M Audit Partition in the TF-M regression tests when
Library model is used.
This is not supported in IPC model and produces a Kconfig warning.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the TF-M library mode explicitly instead disabling IPC model and
relying on this selecting Libray model in the choice.
This is a follow-up on the TFM_IPC being put into a choice selection
when SFN model was added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Spin locks must be in coherent memory for cavs. Initially this variable
was at the compilation unit scope but warnings about it being unused
from a twister run lead me to move it to be in the ifdef scope in the
function.
Move it back into the compilation units scope and wrap it in an
ifdef to ensure its not labeled as unused.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This patch updates my status on areas where unfortunately I no longer
have time or interest to contribute:
- Removed my collaborator status from STM32, display, sensors, kscan,
PWM and hal_ti
- Downgraded my status from maintainer to collaborator for the GD32
platform
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Without this define, the structure iis2dh_device_config
is defined incorrectly.
The structure is defined in iis2dh.h file as follows:
struct iis2dh_device_config {
struct spi_dt_spec spi;
struct i2c_dt_spec i2c;
uint8_t pm;
struct gpio_dt_spec int_gpio;
};
without the macro
the structure is defined as
struct iis2dh_device_config {
uint8_t pm;
struct gpio_dt_spec int_gpio;
};
which results in accessing the wrong data when
calling iis2dh_init_interrupt
function (or any other functions in this file)
Signed-off-by: Mehdi Zemzem <mehdi.zemzem2@gmail.com>
Remove inclusion of moved and non needed header.
Other unneeded headers have been also removed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This adds the SMP groups to a separate heading and makes them visible
in the contents list so that they can be selected without having to
go to a specific page to find them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update twister to support running QEMU platforms with sysbuild, by parsing
domains.yaml and executing the "run" target of the default application.
This will allow twister to test QEMU targets with sysbuild. It is assumed
that QEMU targets will add any external images they need in the build
phase
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Ensure that QEMU_PIPE variable is set when using sysbuild. This is required
because twister will use the "main" sysbuild application as the target for
"ninja run" when testing QEMU targets, which means that the "main" build
must be aware of any QEMU_PIPE setting passed by twister at build time.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Since twister can make use of domains.py as well, refactor west's use
this file so that domains.py can be moved to a generic library folder.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Exclude scripts/pylib/build_helpers from default gitignore behavior of
ignoring all directories whose names begin with build, as this directory
is used for build helper scripts shared by west and twister.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Linking fails on ubuntu 22.04 because of multiple definitions of the `fff`
global, which is defined by `DEFINE_FFF_GLOBALS`.
Only define it in the tests' `main.c` instead of the mocks.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
buf.c have been providing net_buf pool allocator and dealocator
for SMP packets: mcumgr_buf_alloc and mcumgr_buf_free.
The functions have been moved to smp.c and renamed
smp_packet_alloc and smp_packet_free, respectively.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
SMP buffer allocation functions have been moved to smp/smp.h,
and buf.h has been removed.
Definitions of cbor_nb_reader and cbor_nb_writer have also been moved.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit moves functions used for initialization of CBOR encoding
and decoding to the only unit that is supposed to use them.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add the alias of GY271 in it8xxx2_evb.overlay. Modify the
testcase.yaml, as the GY271 is magnetic sensor, not accelerometer
and remove the harness.
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
