The pwm field in struct args_index was missed when pwm was renamed to
channel in all drivers. As a result, the PWM shell could no longer be
built.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit adds the indentation style for the C++ source and header
files.
Note that the C++ indentation style has been configured to match that
of the C files because the C++ source files we currently have in the
Zephyr repository follow the style we enforce for the C files.
In the future, it may be preferable to follow the indentation style
recommended by one of the common C++ style guides, such as the Google
C++ Style Guide which recommends 2 spaces for indentation.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the maximum line length for the commit messages
from 72 to 75, in order to align with the checkpatch and gitlint
policies.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the maximum line length from 80 to 100 as per the
GitHub issue #30426 ("Enforce all checkpatch warnings and move to 100
characters per line").
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the MAINTAINERS entry for the CMSIS-NN integration,
with @JordanYates, the initial contributor, as the maintainer and
@stephanosio as a collaborator.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
sparse complains about cbprintf incompatible callback type and
incorrect size of struct __va_list. Add exceptions to silence those
errors.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
With this adding "-DSPARSE=y" to the "west build" command line
performs a sparse check of the project build. So far only gcc-based
builds are supported.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
- Previously non-secure request at the 6th run expected to return status
"-135 (PSA_ERROR_INVALID_ARGUMENT)" which is the expected status so
updating "if" condition on the non-secure side handles this expected
type error status from the secure side.
- update sample YAML harness config regex of Digest message as this gets
compared at the run of twister.
- Update the readme console logs.
Signed-off-by: Rajkumar Kanagaraj <rajkumar.kanagaraj@linaro.org>
The it8xxx2 watchdog Kconfig options are always shown, for every type
of device, they should only be shown when an it8xxx2 device is being
targeted.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Add the release procedure for the unicast audio tests.
This also run the existing tests multiple times to ensure
that the states are properly changed across multiple
attempts.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The audio stream should be detached from the endpoint
when the endpoint goes into the releasing state, instead
of the idle state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ase_process had a check for the IDLE state, but the
check did not do anything, so was removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The releasing state does not trigger any stream ops,
but will be a no-op case to avoid the error log
message.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Readme instructions for connecting SAI4 as TX to SAI1 as RX on this
board. Also includes overlay and Kconfig settings to run this test
on the board.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
If platform supports non-cacheable region, place mem_slab's for I2S
driver buffers there. This enables drivers using DMA without cache
coherency issues.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Includes several driver fixes and improvement to leverage
scatter/gather mode of DMA. Loads multiple DMA blocks into TCDs.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
RX FIFO watermark setting causing issue where last 16 words received
were stuck in FIFO, and not requesting DMA to move to buffer. Fixed by
setting watermark to 0.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
driver config settings were getting overwritten by APIs that set
default settings, like SAI_GetClassicI2SConfig(). Moved config code
after those APIs.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
stream_disable()'s should not always purge buffers.
And i2s_rx_stream_disable() needs separate control for
purging in_queue and out_queue since app owns buffers
after placed in out_queue for i2s_read()
Signed-off-by: Derek Snell <derek.snell@nxp.com>
MCP4728 is a 12-bit, Quad Digital-to-Analog Converter with EEPROM Memory.
Controlled via I2C interface.
Signed-off-by: Marek Janus <marek.janus@grinn-global.com>
Two TLS features developed in parallel resulted in the same option
number being assigned to two options. In this case give preference to
TLS_NATIVE, since it was longer in the tree.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Terminate connection with a MIC failure if an unexpected control PDU
is received during the Encryption Start procedure.
Add a greedy option to pdu_is_expected() to make sure the procedure
processes all unexpected control PDU in all cases.
Add unit test inspired by Bluetooth Qualification test
LL/SEC/CEN/BV-14-C,
Central Receiving unexpected PDU during encryption start
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add support for both LL_REJECT_IND and LL_REJECT_EXT_IND when waiting
for the the response to the LL_ENC_REQ and LL_START_ENC_REQ.
Add unit test to test both LL_REJECT_IND and LL_REJECT_EXT_IND as
responses to LL_ENC_REQ.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Chose correct rejection PDU based on features supported on remote peer
when rejecting due to missing LTK.
Update unit test setup with faking that a feature exchange procedure
has run.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Terminate connection with a MIC failure if an unexpected control PDU
is received during the Encryption Start procedure.
Add unit test inspired by Bluetooth Qualification test
LL/SEC/PER/BI-05-C,
Peripheral Receiving unexpected PDU during encryption start
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
This adds suport for validation of received PDUs before they are
pass further to LLCP state machines. If PDU size is invalid it is
rejected with LL_UNKNOWN_RSP.
This was affecting following qualification test cases:
LL/PAC/PER/BI-01-C
LL/PAC/CEN/BI-01-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Introduce TLS socket options, which allow to configure session caching
on a socket.
The cache can be enabled on a socket with TLS_SESSION_CACHE option.
Once cache is enabled on a socket, the session will be stored for re-use
after a sucessfull handshake. If a socket is attempting to connect to a
host for which session is stored, the session will be resumed and mbed
TLS will attempt to use a simplified handshake procedure.
The server-side management of sessions is fully controlled by mbed TLS
after session caching is enabled on a socket.
The other TLS_SESSION_CACHE_PURGE option allows to clear all of the
cache entries, releasing the memory allocated for sessions.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Kconfig configuration options which allow to configure
session caching in mbed TLS.
Note, that mbed TLS only takes care of server-side caching, the
application (socket layer) needs to implement a session storage for
client.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to be consistent with what is possible in Devicetree, always
take a period in nanoseconds. Other scales or units may be specified by
using, e.g., the PWM_MSEC() macros (all of them converting down to
nanoseconds). This change then deletes the "_nsec" and "_usec" versions
of the pwm_set call.
Note that this change limits the period to UINT32_MAX nanoseconds,
~4.3s. PWM is, in generali, used with periods below the second so it
should not be a problem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify the driver by using pwm_dt_spec.
TODO: decide if pwm_dt_spec should also store period.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The sample did not use PWM in a proper way: it relied on a PWM device
handle, but channel or flags were hardcoded in the code. This patch
changes the sample to use a local binding ("pwm-servo") where the `pwms`
property is defined. This allows to make use of pwm_dt_spec facilities,
reducing the overall sample complexity and making it more portable
without editing the source code. The custom binding also requires to
provide the minimum/maximum pulse width so that different servos can be
easily plugged in without the need to edit sources.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Similar to other APIs, this patch introduces the pwm_dt_spec structure
and associated helpers, e.g. PWM_DT_SPEC_GET() or pwm_set_cycles_dt().
The pwm_dt_spec reduces the boilerplate code needed when using
Devicetree. For example, if we have:
led: led {
...
pwms = <&pwm0 1 PWM_POLARITY_NORMAL>;
...
};
One can do now in the application:
struct pwm_dt_spec led = PWM_DT_SPEC_GET(DT_NODELABEL(led));
pwm_set_usec_dt(&led, LED_PERIOD_USEC, LED_PULSE_USEC);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In a first place, the PWM API operates on "channels", not "pins". While
the API calls could have been changed by _channel, this patch takes the
approach of just dropping _pin. The main reason is that all API calls
operate by definition on a channel basis, so it is a bit redundant to
make this part of the name. Because the `_dt` variants of the calls are
going to be introduced soon, the change to `_channels` + `_dt` would
make API function names quite long.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The variable indicating the PWM channel is now names "channel" instead
of "pwm", adjust all drivers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
