Synch up to upstream
aa041a282d
- Added workflow verifying integration with the Zephyr
- removed deprecated DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL
- Fixed usage of CONFIG_LOG_IMMEDIATE
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since the loopback driver makes use of the RX packet pool now, adjust
the packet count for the test.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When TCP stack enters retransmission mode, the variable tracking the
amount of unacknowledged data is cleared. This prevents the stack from
detecting when TX window is full, which could lead to queueing unlimited
amount of data, effectively consuming all of the avaiable network
buffers.
Prevent this, by returning early from net_tcp_queue_data() in case TCP
stack is in retransmission mode. The socket layer will take care of
retrying just as in case the window is full.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a loopback or own address is used in TCP connection, the TCP
stack delegates the acatual data send to a workqueue. This is fine,
however it could lead to some aritificial delays in case a lot of data
is being sent before the workqueue has a chance to execute queued work
items. In such case, we only sent a single packet, when many could've
already been queued.
Fix this, by resubmitting the queue in case a local address is used, and
there's still more packets pending for send.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When peer reports a zero length receive window, the TCP stack block any
outgoing data from being queued. In case no further ACK comes from the
peer, the whole communication could stall. Fix this by sending a simple
Zero Window Probe, when we detect a Zero Length Window.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_pkt_alloc_buffer() will use the maximum packet length of
NET_IPV4_MTU in case the interface MTU is smaller than this. Because of
this, the using the loopback interface with smaller MTU leads to
additional fragmentation at the TCP layer, which impacts performace and
requires more network buffers for tests to execute.
Fix this by matching the loopback interface MTU with NET_IPV4_MTU.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit updates the CI documentation build workflow to upload the
HTML pull request documentation builds to the S3 builds.zephyrproject.io
bucket so that they are directly accessible from the web.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the license check workflow to use the v4 release
of the scancode action, which uses a more recent scancode version.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add flag to copy function which indicates that read-only
string locations shall be kept in the output package.
Updated cbprintf_package test to pass.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add configuration for stm32h7b3i_dk board which enables
integration of touch controller (KSCAN) present on the board
into LVGL
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
Update board device tree with LTDC node
Update board documentation - display support and RGB pinout
Update board defconfig - if display is used, then external
SDRAM must be enabled in order to fit the frame buffer in
memory
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
Add Kconfig for STM32 LTDC driver
Add STM32 LTDC driver C source
Update display drivers CMakeLists with the new driver
Update display drivers Kconfig with the new driver
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
Add devicetree node for IPC driver so that the IPC interrupt properties
can be accessed with device tree interrupt property macros and
configured using devicetree overlays.
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
Co-authored-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Follow up on commit 37bf7cb
("dts/bindings: stm32: Set pinctrl-[0/names] properties as required")
Report lack of those fields soon at build to avoid cryptic
DT api build error messages.
Signed-off-by: Maciej Zagrabski <maciej.zagrabski@grinn-global.com>
Replace custom init code with the regulator infrastructure to enable the
Vin1 monitoring circuit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There's no in-tree driver for the A71CH secure element, which is the
code that should be responsible to control the chip reset line.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace custom init code with the regulator infrastructure to enable the
3V3 power rail.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Boards must only enable minimal peripherals according to the porting
guidelines. USB, I2C or ADC are not in the minimal list.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extend the CAN driver timing tests to cover data phase timing on CAN-FD
capable CAN controllers.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Extend the CAN driver timing calculation test verification to cover the
sjw and prescaler values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert can_calc_timing() + can_calc_timing_data() to syscalls and use
the newly added syscalls calls for determing the minimum/maximum
supported timing parameter values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add CAN system calls for getting the minimum/maximum timing values
supported by a given CAN controller device driver instance:
- can_get_timing_min()
- can_get_timing_max()
- can_get_timing_min_data()
- can_get_timing_max_data();
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Pin control DTSI files need /omit-if-no-ref/ property to reduce
generated devicetree size and improve build times.
Fixes#44262
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In cmake we use target_byproducts() to register dependence on the map
file alongside the executable for it - this makes sense.
Thus if the map file is missing, ninja will detect and issue a linker
command again. However after that, cmake was instructed to rename the
map file. Thus a 2nd round of ninja, which should be a no-op, is not as
the registered byproduct file is missing.
To keep this static, and to keep the map file alongside the elf file, we
will instead copy the map file.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Improve documentation
- Add a photo of the board
- Add hardware information from the board manual
- Fix options for build (set OPENOCD_DEFAULT_PATH to make it
valid for also windows environment)
- Improve the build instructions to make it easier to understand
Signed-off-by: Yuichiro SAGISAKA <yu.sagisaka@fujitsu.com>
Timestamps can be 32 or 64 bit long based on the platform and
build configurations. The proper way to handle these timestamps
is to use the ad-hoc log_timestamp_t variable.
This patch fixes some timestamp's reference which were still
using uint32_t changing them to log_timestamp_t.
Moreover also a new config is added in order to print the
timestamp as the Linux's kernel format. This might be useful
in AMP platforms in which Linux's and Zephyr's logs must be
interleaved in order to get a more comprehensive log solution.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit overrides the toolchain internal `__INTN_C(value)` integer
constant macros to match the types defined by the `zephyr_stdint.h`
header.
For more details, refer to the GitHub issue #44199.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Reset the ESP modem inside the device initialisation function so that
errors can be detected through the use of `device_is_ready`.
Fixes#43891 for this driver.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the network device instantiation macro to above the esp_init
function so that static variables declared by the macro are visible to
the init function.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
