To enable or disable CTE sampling in periodic advertising scanner LLL
implementation lll_sync is extended by lll_df_sync member.
The lll_df_sync is a double buffer for lll_df_sync_cfg.
It will be used by LL thread to enable or disable CTE sampling and
provide configuration for sampling CTE in AoA mode.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add handling of Direction Finding node_rx_iq_report type in ULL.
This is required to correctly deliver IQ samples collected by
LLL during receive of PDU including CTE.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Reset the scanning context for the PHY not selected in the
Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Consolidate Kconfigs for ISO roles to make compilation guards more
concise. Just introduces aliases, does not change functionality.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
First design towards ISO adaptation layer, this PR introduces
data-structures and framework for Rx unframed PDUs (BT RX ingress).
Two callbacks are defined for the SDU production (BT RX egress), one for
SDU allocation as well as a callback for emitting a reassembled SDU.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
LL_CIS_IND starts a ticker for the created CIG, using the event_counter
and offset provided. Ticker generates callbacks to
lll_peripheral_iso_prepare. Event done with ISO (extra) type is demuxed
and done handled for CIG including ticker update with drift
compensation.
TODO: Handle multiple CISes as well as pause/resume and scheduling
latency.
Signed-off-by: Morten Priess <mtpr@oticon.com>
A bunch of commands were missing from the bitmap in the Read Local
Supported Commands response. Add them accordingly.
Fixes#33324.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove inclusion of vendor specific internal LLL include
files in ULL source code.
Prefix `lll/` include file path to correctly include vendor
defined types and function implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use `#if defined(...)` instead of `#if IS_ENABLED(..)` when
conditional compilation of definitions in source code.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the ECC emulation setting the supported command bits in order
to group the supported commands together with the implementation of
these commands.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for ISO feature bits. This includes extending fields that
hold features to 64 bits to be able to handle the host-controlled
"Isochronous Channels" feature.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add checks to detect ACL data lengths greater than the
configured maximum Tx buffer size in the controller.
The Host should conform to the LE_ACL_Data_Packet_Length
returned by the LE Read Buffer Size command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conform to Bluetooth Specification, if the LE_Scan_Enable
parameter is set to 0x01 and scanning is already enabled,
any change to the Filter_Duplicates setting shall take
effect. Disabling scanning when it is disabled has no
effect.
Fixes#31019.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BIG Sync Terminate Command to generate Sync Established
event if Sync initiation is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation of HCI_Set_Connecitonless_CTE_TX_Enable
command to HCI. Add scratch implementation of command handling
functions to controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Correct names of kconfig entries to mach to style of other entries.
Style correction in hci.c. Use the same approach of checking if
Kconfig entry is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Implements handling of the BIG sync commands in the ULL.
LLL support and handling of ACAD (biginfo) remaining.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Clean up included header files, remove including
zephyr/types.h and other deprecated or redundant
header files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation of HCI_LE_Set_Connectionless_CTE_-
Transmit_Parameters command in HCI.
Add implementation of command handling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
'ext_hdr' member only covers extended header part of 'ext_hdr_adv_data'
and with addition of 'data' member to 'pdu_adv_ext_hdr' those can be
used to quickly access both extended header flags and data directly
from 'pdu_adv' without need for extra local variables and casts.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
pdu_adv_hdr name is quite confusing since it suggests some generic
header for advertising PDUs while this in fact is extended header
which is a part of common extended advertising payload and only applies
to extended advertising PDUs.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The 'adi' part of that member name does not make sense since ADI is
already part of extended header, so we only have 'extended header' and
'advertising data'.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
If handle mapping is enabled, we need to use proper advertising set
handle in HCI event.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Removed the node_rx argument for the BIG create/terminate
functions. The event should not be sent right after the
command, but needs to wait for transmissions of
empty BIS packets or BIG terminate indications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements the BIG terminate command that terminates a
BIG and returns the appropriate events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements handling of the BIG create command in the upper link layer.
Does not yet handle sending any BIS events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Read ISO Link Quality command
* LE Read ISO TX Sync command
* LE Set Host Feature Command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fix field names of bt_hci_cp_le_setup_iso_path in le_setup_iso_path to
make CIS central/periphal compile and adjust parameter names for
ll_setup_iso_path accordingly.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Implement HCI commands to read information about supported codecs and
controller delay.
* Read Local Supported Codecs command (v1 and v2)
* Read Local Supported Codec Capabilities command
* Read Local Supported Controller Delay command
The following functions are implemented as "weak" symbols and should
be overridden to fill in vendor-specific information into the above
commands.
* hci_vendor_read_std_codecs
* hci_vendor_read_vs_codecs
* hci_vendor_read_codec_capabilities
* hci_vendor_read_ctlr_delay
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add implementation of HCI_LE_Set_Connection_CTE_Transmit_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add partial implementation for handling Bluetooth 5.1 Direction
Finding HCI command HCI_LE_Read_Antenna_Information to controller
Upper Link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix node rx buffer leak if extended advertising and/or
periodic sync reports are masked out by the host.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added code comments to explain the reasons to drop
incomplete advertising and sync report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Report generation that skipped
population of AD data when there was no extended header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Setup ISO Data Path command
* LE Remove ISO Data Path command
* Configure Data Path command
* LE Set CIG Parameters Test command
* LE ISO Read Test Counters command
* LE ISO Receive Test command
* LE ISO Test End command
* LE ISO Transmit Test command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fix Extended Advertising Data population when there is no
Extended Header to be filled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of guarding the NODE_RX_TYPE_USER cases with
CONFIG_BT_CTLR_USER_EXT we guard them with
CONFIG_BT_CTLR_USER_EVT_RANGE > 0 as that is the actual value that
enables/disables the NODE_RX_TYPE_USER values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
