Add the support of the reset-cmd property for the stm32h7 disco kits
where the quad-spi flash is mt25ql512ab
This device accepts the SPI_NOR_CMD_RESET_En/SPI_NOR_CMD_RESET_MEM
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Use the define to send the reset cmd at quad-flash init :
SPI_NOR_CMD_RESET_EN followed by SPI_NOR_CMD_RESET_MEM
when the st,stm32-qspi-nor has the <reset-cmd> property set.
Reports the jedecID correctly.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
MCUX ehci controller driver support cache maintenance if
USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE is enabled.
Enable USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE if
CONFIG_UDC_BUF_FORCE_NOCACHE is false and CONFIG_NOCACHE_MEMORY
is true.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
add reset control registers information (on RCC_BUS_RSTR LTDCRST bit)
for display peripheral reset.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Configures pins for the SPI instance attached to the Pmod connector to
enable using this board with the pmod_acl shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds a new shield definition for the Digilent Pmod ACL module. This
module provides support for an ADI ADXL345 3-axis accelerometer over a
Pmod SPI connector.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
The MBT server, as the MBT client currently sets the maximum chunk size
according to maximum supported segments in the accesss layer. This might
be suboptimal for some use cases.
The added Kconfig options give customers the option to fine tune it
themselves.
Future work will include addition of an API for the customer to modify
it also during runtime.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Add conn parameter to status/flags callbacks of bt_vcp_vol_rend_cb
to differentiate between remote and local changes.
Signed-off-by: Chang An <chang.an_1@nxp.com>
Check if the frame is within the text address before saving
into the buffer, this eliminates the extra, uninitialized frame
at the end of the unwind.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Relocate stack unwind backends from `arch/` to perf's
`backends/` folder, just like logging/shell/..
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The timer & dwork can be statically initialized,
SYS_INIT is not strictly required.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Currently, the timer is stopped:
- in the timer handler, when the buffer is full, or
- in work handler, when time's up
In any cases, the work handler is bounded to run to print
the message, so we can kill the timer there instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added:
- `clear` to discard the buffer without printing
- `info` to print info about the buffer and if the
profiler is running
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
"Perf is already running" works for `record` but is a little
strange when doing `printbuf`, so remove the "already" to
make it more universal.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The `buf_full` flag is set when it is full, but dumping the
buf currently only resets the `idx`, this means that the perf
command only works when the buffer hasn't been full before.
Reset the flag when we clear the buffer.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`PERF_EVENT_TRACING_BUF_OVERFLOW` isn't used, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`cmd_perf` isn't doing anything meaningful, remove it so that
the help message will be printed when invoked. Updated
the help message of the main command.
```
uart:~$ perf
perf - Lightweight profiler
Subcommands:
record : Start recording for <duration> ms on <frequency> Hz
Usage: record <duration> <frequency>
printbuf : Print the perf buffer
```
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
static perf_data is zero-initialized by default, there's no
need to explicitly set `idx` to `0`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Introduce list mode in Zephyr-sdk module package.
The list mode allows to list all Zephyr SDK's found in the system
without loading any of them.
Signature of the list mode is:
> find_package(Zephyr-sdk COMPONENTS LIST)
Will print valid Zephyr SDKs and their path, as well as defining the
following corresponding CMake lists:
- Zephyr-sdk : List of Zephyr SDKs' version
- Zephyr-sdk_DIRS : List of Directories with a valid Zephyr SDK.
Each entry in Zephyr-sdk corresponds to the same entry index in the
Zephyr-sdk_DIRS list.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Minor cleanup of the FindZephyr-sdk.cmake module.
- Honor the QUIET flag on find_package(Zephyr-sdk QUIET)
Do not print messages when caller has specified QUIET in the
'find_package()' call.
- include Zephyr extensions CMake module.
FindZephyr-sdk.cmake uses zephyr_get() from extensions.cmake, and
therefore the proper thing to do is to include said module in order
to have the package re-usable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Install the default delegate for reporting the CAN core clock frequency at
driver instance initialization. This allows using the default clock
configuration when not using ztest.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This patch contains big-endian version of the macros present in that
file. The new code is formatted by clang-format, which is why the
formatting is different.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This assert cannot be turned on, as `pdu` will be NULL sometimes. This
is okay, it just means that the current channel doesn't have anything to
send and that we should probably try another one.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Disable input buffer full interrupt for 60h/64h and 62h/66 ports by
calling interrupt controller API. The API has barrier mechanism to
ensure that a thread's requirement to disable peripheral interrupt
takes effect before enabling CPU interrupt. Therefore, the disabling
operation does not occur in ISR and results in interrupt 0 symptom.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
The Audio integration PLL is faster on PTL compared to earlier ACE
platforms: 442.368 MHz instead 393.216 MHz, however the default
divider remained 16, which will result incorrect cardinal clock speed.
Change the divider to 18 in order to get correct 24.576 MHz cardinal
clock.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Add power management support for Apollo3/Apollo3P SPI, and
automatically enables device runtime power management
Signed-off-by: Zhengwei Wang <zwang@ambiq.com>
Add power management support for Apollo3/Apollo3P I2C, and
automatically enables device runtime power management
Signed-off-by: Zhengwei Wang <zwang@ambiq.com>
Add power management support for Apollo3/Apollo3P UART, and
automatically enables device runtime power management
Signed-off-by: Zhengwei Wang <zwang@ambiq.com>
Add initial support for npcm400 evaluation board
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: James Chiang <cpchiang1@nuvoton.com>
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Add initial support for nuvoton npcm400, which is a chip
family of Satellite Management Controller(SMC).
Add ecst python scripts to append the header used by ROM Code
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: James Chiang <cpchiang1@nuvoton.com>
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Config to enable VLAN promiscuous and untagged.
Config to enable SI message interrupt.
Fix the build warning.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
Create the set FD mode function because the old
RTD function is updated to static.
Fix the build warning by update the type of buffidx
and u32SysStatus arguments in the callback function
to uint32_t.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
